BED BATH AND BEYOND 39521672 Framed LED Mirror User Manual

July 20, 2024
Bed Bath and Beyond

BED BATH AND BEYOND 39521672 Framed LED Mirror

BED BATH AND BEYOND 39521672 Framed LED Mirror

Before Installation

Thank you so much for choosing our mirrors, in order to facilitate the use of our products, please read this instruction carefully before installation.

Please Notice:

  1. Please read all instructions carefully before assembling the item.
  2. After opening the package, inspect the product immediately upon receipt for transit damage or missing parts.
  3. Please power the mirror with plug to test all its functions before installing on the wall.
  4. Assembly by two or more adults is highly recommended.
  5. Disconnect power before installing, adding or changing any components.
  6. Ensure that the fixing location is able to take the weight of the complete fitting.
  7. Keep the voltages 110V-120V. If the voltage exceeds 120V, please use transformer.
  8. To connect the wires to electrical junction box, a qualified technician or electrician is highly recommended.

Please check and make sure below functions work properly before installation

Product Functions

Symbol Anti-fog switch:After connecting the power, the anti-fog function is already turn on automatically. If you don’t need to use it, just touch it to turn it off, to prevent wasting energy. The defogging will take effect within 10 minutes after it’s turned on and close in 1 hour, so you can turn it on 10 minutes before taking a bath.
Symbol Dim switch: The led light supports 10% to 100% brightness adjustment, just long press the button. This button has memory function, the next time you open the mirror it will be in the same brightness it was in before it was last closed, which means that you don’t have to touch the buttons each time.
Symbol Color temperature switch: The front and back lights all have three color temperatures that can switch(3000K/4000K/6000K), just need to short press this button. And this button has a memory function as well.

Button Lighting Mode

State of Button Light Meaning
White Light ON Function is Working
Blue Light ON Function Standby
Light OFF Power OFF

Package Contents

  • Bracket x2

  • Wall Anchors x4

  • Screws x4

  • Plug

  • LED Mirror

Installation tools you may need

  • Level
    Installation tools

  • Pencil
    Installation tools

  • Hammer

  • Safety Goggles
    Installation tools

  • Electric Drill
    Installation tools

  • Screwdriver
    Installation tools

  • Tape Measure

Installation tools

PS: The location of the button is located the power box.

Product Specifications

Size| Thickness| Touch

Button

| LED

Stripe Model

| Color Temperature| Lumen| CRI| Power( W)| Input Voltage(V)| Weight (k g)
---|---|---|---|---|---|---|---|---|---
2o• x 28″| 1.5″| 3| 2835 3 colors 192LED| 3000/4000/6000| 6780| 90| 48| 11 0V~, 50/60Hz| 6.9
24″X 32″| 1.5″| 3| 2835 3 colors 192 LED| 3000/4000/6000| 8220| 90| 60| 11 ov~, 50/60Hz| 8.8
24″X 36″| i. 5•| 3| 2835 3 colors 19 2LED| 3000/4000/6000| 8943| 90| 60| 11 0V~, 50/60Hz| 9.68
28″ X 36″| 1 . 5·| 3| 2835 3 colors 192LED| 3000/4000/6000| 9376| 90| 60| 11 0V ~, 50/ 60Hz| 11
28″X60″| 1.5″| 3| 2835 3 colors 192LED| 3000/4000/6000| 14250| 90| 100| 11 0V~, 50/6 0Hz| 16.8
32’X 40″| 1.5·| 3| 2835 3 colors192LED| 3000/4000/6000| 12216| 90| 75| 11 0V~, 50/60Hz| 15.48
32″X 48″| 1.5·| 3| 2835 3 colors 192 LED| 3000/4000/6000| 13611| 90| 100| 11 0V~, 50/60Hz| 15.4
32″X 72″| 1.5″| 3| 2835 3 colors 192 LED| 3000/4000/6000| 12210| 90| 150| 11 0V~, 50/60Hz| 22.5
36″ X 32″| 1. 5•| 3| 2835 3 colors 192LED| 3000/4000/6000| 11304| 90| 75| 11 0V~, 50/60Hz| 12.09
36″ X 36 “| 1 . 5·| 3| 2835 3 colors 192 LED| 3000/4000/6000| 12216| 90| 75| 11 0V~, 50/60Hz| 15.48
36″ X 48 “| 1 . 5″| 3| 2835 3 colors 192LED| 3000/4000/6000| 14490| 90| 100| 11 0V~, 50/60Hz| 17.2
38″ X 38″| i. 5•| 3| 2835 3 colors 192LED| 3000/4000/6000| 13093| 90| 75| 11oV~, 50/60Hz| 14.88
40″ X 30 “| 1.5 •| 3| 2835 3 colors 192 LE| 3000/4000/6000| 11771| 90| 75| 11 0V~, 50/60 Hz| 12.63
40″ X 36″| 1 .5″| 3| 2835 3 col rs 192LED| 3000/4000/6000| 12860| 90| 75| 11 0V~, 50/60Hz| 14.55
48″ X 30 “| 1 . 5″| 3| 2835 3 colors 192 LED| 3000/4000/6000| 13326| 90| 75| 11 0V~, 50/60Hz| 16.84
48″ X 40″| i. 5•| 3| 2835 3 colors 19 2LED| 3000/4000/6000| 15192| 90| 100| 11 0V~, 50/60Hz| 21.24
55•x 30•| 1.5″| 3| 2835 3 colors 192LED| 3000/4000/6000| 14250| 90| 100| 11 0V~, S0/60Hz| 19
55″ X 36″| 1.5″| 3| 2835 3 colors 19 2LED| 3000/4000/6000| 15986| 90| 150| 11 0V~, 50/60Hz| 22.74
60″ X30 “| 1.5 “| 3| 283 5 3 colors 192LED| 3000/4000/6000| 16102| 90| 150| 11 0V~, 50/60Hz| 19.84
60″X 36″| 1.5″| 3| 2835 3 colors 192 LED| 3000/4000/6000| 16250| 90| 150| 11 0V~, 50/60Hz| 26.55
60″ X 40″| 1.5 “| 3| 2835 3 colors 192LED| 3000/4000/6000| 17525| 90| 150| 11 0V~, 50/60Hz| 28.97
72″X 36″| 1.5″| 3| 2835 3 colors 192 LED| 3000/4000/6000| 18000| 90| 150| 11 0V~, 50/60Hz| 31.32
72″ X 40″| 1.5 “| 3| 2835 3 colors 192 LED| 3000/4000/6000| 19990| 90| 150| 110V~, 50/60Hz| 34.32
84″X 32″| 1.5″| 3| 2835 3 colors 192LED| 3000/4000/6000| 22380| 90| 150| 11 0V~, S0/60Hz| 32.9
84″ X 40″| 1.5 “| 3| 2835 3 colors 192LED| 3000/4000/6000| 22424| 90| 150| 11 0V~, 50/60Hz| 41.13
96″X36″| i. 5•| 3| 2835 3 colors 192 LED| 3000/4000/6000| 18620| 90| 150| 1 0V~, 50/60Hz| 43
110″ X 40″| 1. 5″| 3| 2835 3 colors 192 LED| 3000/4000/6000| 27634| 90| 150| 11 0V ~, 50/60Hz| 55.12

Product Specifications

Parameter Specification
Switch Touch Sensor Switch
LED Color Change Yes
LED Dimming Yes
Memory Yes
Anti-fog Yes
Waterproof IP54
Safety Compliance ETL
Glass Thickness 5MM
Glass Material Tempered Glass
Cable Length 1.5 M
Power Source Hardwired / Plug in
Mounting Type Wall Mounted
Mounting Method French Cleat Mounting
Orientation Horizontal / Vertical
Warranty 3-Year Manufacturer

Installation Instruction

Method 1: Plug in Method 2: Hardwire

Insert the plug into the socket, keep the voltages between 110V and 120V. If the voltage exceeds 120V, please use transformer.

| Installation Instruction

Cut the plug, connect the same color wire and tighten them (Disconnect power before hardwire).

Step 1| Step2

Draw a straight line with a ruler to keep the mirror horizontal

| Installation Instruction

Use a electric drill to punch four holes at the marked spots.

Step3| Step4
Installation Instruction

Apply wall anchors with hammer.

| Installation Instruction

Use a screwdriver to screw the screws into the wall anchors.

steps5| Step 6
Installation Instruction

Hang the mirror on the wall

| Installation Instruction

Turn on the power.

Troubleshooting

LED doesn’t turn on / Defogging doesn’t work| Open the power box on the back of the mirror and test the power cables, tighten the cables if they are loose.
( Please cut off the power firstly before testing the power supply and cables).
---|---
Part of light strip is fault| Firstly, please pull the outer silicone strip away and press the inner light strip inward. If it still doesn’t work, need replace the strip light.
After using for a few month, the light doesn’t work.| Please contact us to replace the power supply.

Symbols

Customer Support

Manufacturer:Zhongshan Chengjiang Glass Technology Co.,Ltd.
Address: Jichang Village, Dongfeng Town, Zhongshan
City,Guangdong Province, China
Contact us: hengjiang Glass Technology@outlook.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals