ORBIT 5057 16×2 Summing Mixer Instruction Manual

ORBIT 5057 16×2 Summing Mixer

Product Information

• Product Name: 5057 ORBIT
• Product Type: Summing Mixer
• Model: 16 x 2
• Manufacturer: Rupert Neve Designs LLC

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or PORTABLE CART table specified by the manufacturer, or sold with WARNING the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.

Product Usage Instructions

To ensure the proper usage and safety of the 5057 ORBIT 16 x 2 Summing Mixer, please follow these instructions:

1. Read the entire Operations Manual carefully before using the product.
2. Place the summing mixer in a location away from water or any other liquids.
3. Use a dry cloth to clean the surface of the summing mixer.
4. Ensure that the ventilation openings are not blocked during installation.
5. Avoid installing the summing mixer near heat sources such as radiators, heat registers, stoves, or amplifiers.
6. Do not modify or tamper with the polarized or grounding-type plug. If the plug does not fit your outlet, consult an electrician for assistance.
7. Avoid pinching or walking on the power cord, especially near plugs and receptacles.
8. Only use attachments and accessories specified by the manufacturer.
9. If using a cart, stand, tripod, bracket, or portable cart table, ensure it is suitable for use with the summing mixer to prevent tip-over accidents.
10. During lightning storms or extended periods of non-use, unplug the apparatus from the power source.

Following these instructions will help ensure the safe and proper usage of the 5057 ORBIT 16 x 2 Summing Mixer.

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as vases or beer glasses, shall be placed on the apparatus.
16. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
17. This apparatus has been designed with Class-I construction and must be connected to a mains socket outlet with a protective earthing connection (the third grounding prong).
18. This apparatus has been equipped with a rocker-style AC mains power switch. This switch is located on the rear panel and should remain readily accessible to the user.
19. The MAINS plug or an appliance coupler is used as the disconnect device, so the disconnect device shall remain readily operable.
    • CAUTION : RISK OF ELECTRIC SHOCK. DO NOT OPEN RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR
    • CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)
    • The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons.
    • The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
    • This symbol indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city recycling office or the dealer from whom you purchased the product.
20. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and the receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.CAUTION: Changes or modifications to this device not expressly approved by Rupert Neve Designs LLC, could void the user’s authority to operate the equipment under FCC rules.
21. This apparatus does not exceed the Class A/Class B (whichever is applicable) limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.
22. Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the following chart.According to OSHA, any exposure in excess of these permissible limits could result in some hearing loss. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels use hearing protectors while the equipment is in operation. Ear plugs or protectors in the ear canals or over the ears must be worn when operating the equipment in order to prevent permanent hearing loss if exposure is in excess of the limits set forth here:
    Duration, per day in hours| Sound Level

dBA, Slow Response

| Typical Example
---|---|---
8| 90| Duo in small club
6| 92|
4| 95| Subway Train
3| 97|
2| 100| Typical music via head phones
1.5| 102|
1| 105| Siren at 10 m distance
0.5| 110|
0.25 or less| 115| Loudest parts at a rock concert

WARNING :  To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Rupert Neve Designs 5057 ORBIT: 16 x 2 Summing Mixer
Thank you for purchasing the Rupert Neve Designs 5057 ORBIT. We hope you enjoy using this product as much as we have enjoyed designing and building it. The 5057 features Class-A analog signal paths, custom Rupert Neve Designs transformer-coupled outputs, and a high-accuracy stepped attenuator for mix output level control.

Block Diagram

Front Panel

Rear Panel

Front Panel Features

Mono
When engaged, these four push-button switches allow for the input of mono signals for equal summing to the left and right mix buss outputs. Each individual channel gets summed to mono at unity gain from input to output (0dBu In = 0dBu Out). There is no pan law associated with this feature. If an input signal is connected to Channel 1 or Channel 2, and the MONO 1/2 button is depressed, that signal will be equally summed to the left and right mix buss outputs. If two identical input signals are connected to Channels 1 and 2, the output will be +6dB due to standard voltage summing laws.

Silk
The SILK illuminated push-button switch allows the user to toggle between OFF, RED and BLUE SILK transformer modes. Red SILK has adds high-frequency emphasis to the transformer harmonic content. Blue SILK adds low-frequency emphasis to the transformer harmonic content.

Texture
This 31-detent potentiometer allows for precise control over the amount of harmonic saturation added to the Main Out and/or -6dB Out signal paths. The texture potentiometer is only functional when Red or Blue SILK modes are engaged.
Signal Present / Overload (Left and Right)
The Signal Present / Overload LEDs illuminate green to show Signal Present conditions (-20dBu) and subsequently illuminate Red to indicate Overload conditions (+24dBu). The Overload LED illuminates when the signal is 2dB below clip point to warn the user that the signal peaks are close to actual clip point, allowing the user to adjust accordingly.

Trim
This 12-position rotary switch provides an accurate adjustment of the desired attenuation level for the mix output. The TRIM control is accurate to within +/- 0.1dB of the labeled attenuation steps on the front panel control. (see pg. 2)

Power
The front-panel POWER LED illuminates GREEN to indicate the power status of the 5057.

Rear Panel Features

Main Out
The Main Output features a custom Rupert Neve Designs transformer and is capable of a maximum output level of +26dBu. The transformer outputs on the 5057 maintain excellent signal to noise performance, wide bandwidth and are driven by a fully Class-A signal path.

Link
The Link TRS jacks on the 5057 rear panel provides a simple way to link multiple 5057 summing mixers for expansion of summing channel count. The Link input and output jacks are solely intended to be used to connect other 5057 summing mixers. Please DO NOT use these jacks for any other purpose.

Note: Each TRS link jack (IN and OUT) connects to the Left (Tip) and Right (Ring) UNBALANCED mix bus paths. It is therefore important to ONLY use a TRS cable to connect 5057 units.

Input Channels 1-8
The first group of eight balanced Class-A input channels are made available on this rear-panel female DB25.

Input Channels 9-16
The second group of eight balanced Class-A input channels are made available on this rear-panel female DB25.

Power
An IEC 3-Pin grounded AC inlet with power switch is provided on the back of the 5057. The 5057 can accept an input range of 100-240VAC, and draws a maximum of 35 Watts. There are no user-accessible fuses, they are integrated within the internal power supplies.

GND Lift
This slide switch lifts XLR Output Pin 1 from chassis ground. This switch enables the user to more effectively eliminate ground loops if they are present.

-6dB Out
This is a secondary lower-level output utitilizing the custom Rupert Neve Designs output transformers. The -6dB Output and the Main Output can be connected simultaneously to feed two different destinations.

Specifications

• Input Impedance 16 kΩ
• Frequency Response ZSOURCE = 40 Ω Balanced, 30 ft. XLR Output Cable, 200k Termination
• 10 Hz to 50 kHz +/- 0.1 dB typical
• 150 kHz -3 dB typical
• Noise (BW 22 Hz – 22 kHz, Un-terminated) -90 dBu typical
• Maximum Input Level @ 1 kHz +26 dBu typical
• Maximum Output Level @ 1 kHz +26 dBu typical
• THD+N% BW 22 Hz – 22 kHz, Balanced Input to Main Out
• 0 dBu @ 1kHz 0.003% typical
• +20 dBu @ 1kHz 0.0006% typical
• Crosstalk BW 22 Hz – 22 kHz, Balanced Input to Main Output
• 1 kHz -103 dBu typical
• 10 kHz -93 dBu typical
• Product Dimensions (W x D x H) 19” (48.3 cm) x 9” (22.9 cm) x 1.75” (4.4 cm)
• Shipping Dimensions (L x W x H) 24” (61 cm) x 13” (33 cm) x 4” (10.2 cm)
• Shipping Weight 10 lbs (4.5 kg)

Frequency Response

PRODUCT WARRANTY

Rupert Neve Designs warrants this product to be free from defects in materials and workmanship for a period of three (3) years from date of purchase, and agrees to remedy any defect identified within such three year period by, at our option, repairing or replacing the product.

LIMITATIONS AND EXCLUSIONS
This warranty, and any other express or implied warranty, does not apply to any product which has been improperly installed, subjected to usage for which the product was not designed, misused or abused, damaged during shipping, damaged by any dry cell battery, or which has been altered or modified in any way. This warranty is extended to the original end user purchaser only. A purchase receipt or other satisfactory proof of date of original purchase is required before any warranty service will be performed. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, TO THE EXTEND ALLOWED UNDER APPLICABLE STATE LAW. IN NO EVENT SHALL RUPERT NEVE DESIGNS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of consequential damages or limitations on how long an implied warranty lasts, so this exclusion may not apply to you.

WARRANTY SERVICE
If you suspect a defect in this product, please contact our support staff for troubleshooting by phone (512-847-3013) or email (service@rupertneve.com). If it is determined that the device is malfunctioning, we will issue a Return Material Authorization and provide instructions for shipping the device to our service department.

Rupert Neve Designs
PO Box 1969
Wimberley TX 78676
www.rupertneve.com
tel: +1 512-847-3013
fax: +1 512-847-8869

References

• Rupert Neve Designs – The Most Trusted Name in Sound.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>