Orbit 21006-50 B Hyve Wi-Fi Hub User Guide
- June 1, 2024
- Orbit
Table of Contents
Orbit 21006-50 B Hyve Wi-Fi Hub
Box Contents
-
A Wi-Fi Hub
-
B Quick Start Guide
Power Your Wi-Fi Hub
Plug the Wi-Fi Hub into an indoor outlet.
Choose an indoor location for your hub near the outside location of your timer and within range of Wi-Fi.
Avoid areas where the signal must travel through more than one wall, dirt, or thick steel barriers.
Enter Pairing Mode
Press the B-hyve button to enter into pairing mode. Your hub will flash a blue light every 5 seconds.
To activate pairing mode press the B-hyve button 5 times. The light will flash red, then blue, to indicate that the timer has been reset and is back in pairing mode.
Open The B-hyve App
Once you are in the B-hyve App, tap on settings, tap devices, and finally tap add device. The app will walk you through the rest of the process.
For new users, search for “B-hyve” and download the free Android or iOS app.
Create an account to begin timer setup.
Complete Setup
Once you complete setup you can start adding timers to your hub.
Scan for access to a full user manual, videos, and more. Or visit us at:
bhyve.orbitonline.com
Hub
Range : 150 ft without interference
Temperature Operating Range : 32°F-104°F (0-40°C)
Storage Temperature : -4°F to 140°F (-20 °C to 60 °C)
Humidity Operating Range : 0–90%
Input : 100-240V ~ 50/60Hz 0.2A
Output : 5V-1.0A
For Indoor Use Only
FCC Statement: FCC ID: ML6-BH1
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC Warning : Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device meets the FCC and IC requirements for RF exposure in public or controlled environments. The end user is advised to maintain a distance 20 cm from the timer and any personnel to ensure compliance with RF exposure regulations.
IC Statement: IC: 3330A-BH1
This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003.
Need Help?
If the app and the website don’t have what you’re looking for, please call our
technical support line before returning the B-hyve to the store. Have your MAC
ID ready.
1-800-488-6156 |
support@orbitbhyve.com
DATE:08/02/2018
DESIGNER: SH MARKETING: CD
ARTWORK №: 21006-50 rB
SOFTWARE: Adobe Indesign CC
Printers are responsible for meeting print production requirements. Any
changes must be approved by Orbit®.
Printed piece must meet designated specifications on this form.
© 2018 Orbit Inc.
This work is the property of Orbit®, and cannot be used, reproduced or
distributed in any way without their express permission.
