Orbit 21027-24 B-hyve Gen 2 Wi-Fi Hub User Guide
- June 1, 2024
- Orbit
Table of Contents
Orbit 21027-24 B-hyve Gen 2 Wi-Fi Hub
Product Information
Specifications:
- Model: Gen 2 Hub
- MAC Address: 12-digit alphanumeric code
- Compliance: FCC Part 15, IC
Product Usage Instructions
1. Open the B-hyve App
Log into your B-hyve account and navigate to devices under settings to add the Gen 2 Hub as a new device. Follow the app instructions for setup. For new users, download the B-hyve app from Google Play Store or Apple App Store, create an account to begin timer setup.
2. Power Your Gen 2 Hub
Write down the MAC address located on the back of the hub. Plug the Gen 2 Hub into an indoor outlet within range of your B-hyve device and Wi-Fi signal. Avoid areas with signal obstructions like dirt or thick steel barriers.
3. Enter Pairing Mode
Press the B-hyve button to enter pairing mode. The hub will flash a blue light every 5 seconds, indicating it’s ready for pairing.
FAQ
Q: What should I do if I encounter issues with my Gen 2 Hub?
A: Before returning your B-hyve to the store, scan the QR code provided in the manual for access to a full user manual, videos, and more resources to troubleshoot any problems you may face.
Box Contents
- A Gen 2 Hub
- B Quick Start Guide
Open the B-hyve App
Log into your B-hyve account and go to devices under settings to add the Gen 2 Hub as a new device. The app will walk you through the rest of the process.
For new users, search for “B-hyve” and download the free Android or iOS app. Create an account to begin timer setup
Power Your Gen 2 Hub
Write down the MAC address:
12 digit alphanumeric code on the back of the hub.
Hub MAC Address
Plug the Gen 2 Hub into an indoor outlet within range of your B-hyve device and Wi-Fi signal.
- Avoid areas where the signal must travel through dirt or thick steel barriers.
Enter Pairing Mode
Press the B-hyve button to enter into pairing mode. Your hub will flash a blue light every 5 seconds
Hub
- Model: BH1G2
- Range: 300 ft (91 m) without interference
- Temperature Operating Range: 32°F-104°F (0-40°C)
- Storage Temperature: -4°F to 140°F (-20 °C to 60 °C)
- Humidity Operating Range: 0–90%
- Input: 100-240V ~ 50/60Hz 0.2A
- Output: 5V-1.0A
For Indoor Use Only
Printers are responsible for meeting print production requirements. Any changes must be approved by Orbit®. Printed piece must meet designated specifications on this form. ©2020 Orbit This work is the property of Orbit®, and cannot be used, reproduced or distributed in any way without their express permission.
Orbit®
FCC Statement
FCC Statement: FCC ID: ML6-BH1G2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement: IC: 3330A-BH1G2
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
his device meets the FCC and IC requirements for RF exposure in public or controlled environments. The end user is advised to maintain a distance 20 cm from the timer and any personnel to ensure compliance with RF exposure regulations.
Need Help?
If you encounter a problem, please use the following resources before retuning your B-hyve to the store.
Scan the QR Code for access to a full user manual, videos, and more.
Contact
- call us
- email us
- text us
or visit us at:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>