reolink 1026304-27-2023 Argus 3 Plus Battery Outdoor Camera Instruction Manual

: June 12, 2024
: reolink

Table of Contents

What’s in the Box
Camera Introduction
Set up the Camera
Charge the Battery
Install the Camera
Safety Instructions of Battery Usage
Troubleshooting
Speciﬁcations
Notiﬁcation of Compliance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Operational Instruction
Apply to: Reolink Argus 3 Plus
ReolinkTech https://reolink.com

What’s in the Box

reolink 1026304-27-2023 Argus 3 Plus Battery Outdoor
Camera

NOTE: * Quantity of accessories varies with the model of your camera.

Camera Introduction

reolink 1026304-27-2023 Argus 3 Plus Battery Outdoor Camera - Camera
Introduction

NOTE: Always keep the rubber plug closed ﬁrmly.
Different states of the status LED:
Red Light: WiFi connection failed
**** Blue Light: WiFi connection succeeded
Blinking: Standby status
On: Working status

Set up the Camera

Set up the Camera on Smartphone
Step 1 Scan to download the Reolink App from the App Store or Google Play store. reolink 1026304-27-2023 Argus 3 Plus Battery Outdoor Camera - QR
code

Step 2 Turn on the power switch to power on the camera. reolink
1026304-27-2023 Argus 3 Plus Battery Outdoor Camera - power
switch

Step 3 Launch the Reolink App, and click the “ ” button in the top right corner to add the camera.
Scan the QR code on the device and follow the onscreen instructions to ﬁnish the initial setup. reolink 1026304-27-2023 Argus 3 Plus Battery Outdoor
Camera - Scan

Set up the Camera on PC (Optional)
Step 1 Download and install the Reolink Client: Go to https://reolink.com>Support>App&Client.
Step 2 Launch the Reolink Client, click the “ ” button, input the UID code of the camera to add it and follow the onscreen instructions to ﬁnish the initial setup.

Charge the Battery

It’s recommended to fully charge the battery before mounting the camera outdoors.

reolink 1026304-27-2023 Argus 3 Plus Battery Outdoor Camera -
Battery Charge the battery with the Reolink Solar Panel (Not included if you only purchase the camera).
Charging indicator:
Orange LED: Charging
**** Green LED: Fully charged

For better weatherproof performance, always keep the USB charging port covered with the rubber plug after charging the battery.

Install the Camera

Notes on Camera Installation Position

Install the camera 2-3 meters (7-10ft) above the ground to maximize the detection range of the PIR motion sensor.
For effective motion detection, please install the camera angularly.
NOTE: If a moving object approaches the PIR sensor vertically, the camera may fail to detect motion.

Mount the Camera to Wall

Rotate the base to separate it from the bracket.

Drill holes in accordance with the mounting template and screw the base of the bracket to the wall. Next, attach the other part of the bracket to the base.
NOTE: Use the drywall anchors included in the package if needed.

Screw the camera to the bracket. Adjust the camera angle to get the best ﬁeld of view.

Secure the camera by turning the part on the bracket identiﬁed in the chart clockwise.
NOTE: To adjust the camera angle later, please loosen the bracket by turning the upper part anticlockwise.
Install the Camera with Loop Strap reolink 1026304-27-2023 Argus 3 Plus
Battery Outdoor Camera - Loop

Place the Camera on a Surface If you plan to use the camera indoors and put it on a ﬂat surface, you may place the camera into the stand bracket and adjust the camera angle by slightly rotating the camera back and forth.

Safety Instructions of Battery Usage

Reolink Argus 3 Plus is not designed for running 24/7 at full capacity or around-the-clock live streaming. It’s designed to record motion events and to live view remotely only when you need it.
Learn useful tips on how to extend the battery life in this post: https://support.reolink.com/hc/en-us/articles/360006991893

The battery is built-in, so do not remove it from the camera.
Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or Reolink solar panel. Do not charge the battery with solar panels from any other brands.
Charge the battery when temperatures are between 0°C and 45°C and always use the battery when temperatures are between -20°C and 60°C.
Keep the USB charging port dry, clean and free of any debris and cover the USB charging port with the rubber plug when the battery is fully charged.
Do not charge, use or store the battery near any ignition sources, such as ﬁre or heaters.
Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed, or appears abnormal in any ways. If the battery is being used or charged, turn off the power switch or remove the charger immediately, and stop using it.
Always follow the local waste and recycle laws when you get rid of the used battery.

Troubleshooting

Camera is not Powering on
If your camera is not turning on, please apply the following solutions:

Make sure the power switch is turned on.
Charge the battery with a DC 5V/2A power adapter. When the green light is on, the battery is fully charged.
If these won’t work, please contact Reolink Support https://support.reolink.com

Failed to Scan QR Code on the Phone
If the camera cannot scan the QR code on your phone, please try the following solutions:

Remove the protective ﬁlm from the camera lens.
Wipe the camera lens with a dry paper/towel/tissue.
Vary the distance between your camera and the mobile phone so that the camera can focus better.
Try to scan the QR code under sufficient lighting.
If these won’t work, please contact Reolink Support https://support.reolink.com

Failed to Connect to WiFi During Initial Setup Process
If the camera fails to connect to WiFi, please try the following solutions:

Ensure that you have entered the correct WiFi password.
Put the camera closer to your router to ensure a strong WiFi signal.
Change the encryption method of the WiFi network to WPA2-PSK/WPA-PSK (safer encryption) on your router interface.
Change your WiFi SSID or password and make sure that SSID is within 31 characters and password is within 64 characters.
Set your password using only the characters available on the keyboard.
If these won’t work, please contact Reolink Support https://support.reolink.com

Speciﬁcations

Video
Field of View: 120° diagonal
Night Vision: Up to 10m (33 ft)
PIR Detection & Alerts
PIR Detection Distance:
Adjustable up to 10m (33ft)
PIR Detection Angle: 100° horizontal
Audio Alert: Customized voice-recordable alerts
Other Alerts: Instant email alerts and push notiﬁcations
General
Operating Temperature:
-10°C to 55°C (14°F to 131°F)
Weather Resistance:IP65 certiﬁed weatherproof
Size: 121 x 90 x 56 mm
Weight (Battery included): 330g (11.6 oz)
For more speciﬁcations, visit https://reolink.com/.

Notiﬁcation of Compliance

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. FCC RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Simpliﬁed EU Declaration of Conformity
Reolink declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environment safe recycling.
Limited Warranty
This product comes with a 2-year limited warranty that is valid only if purchased from Reolink official stores or a Reolink authorized reseller. Learn more:
https://reolink.com/warranty-and-return/.
NOTE: We hope that you enjoy the new purchase. But if you are not satisﬁed with the product and plan to return, we strongly suggest that you reset the camera to factory default settings and take out the inserted SD card before returning.
Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and Privacy Policy at reolink.com Keep out of reach of children.
End User License Agreement
By using the Product Software that is embedded on the Reolink product, you agree to the terms of this End User License Agreement (“EULA”) between you and Reolink. Learn more: https://reolink.com/eula/.
ISED Radiation Exposure Statement This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
OPERATING FREQUENCY
(the maximum transmitted power)
2.4GHz: 2412-2462MH (18dBm)
5180-5240MHz (16.09dBm)
5745-5825MHz (14.47dBm)
Technical Support
If you need any technical help, please visit our official support site and contact our support team before returning the products https://support.reolink.com

REOLINK INNOVATION LIMITED
FLAT/RM 705 7/F FA YUEN COMMERCIAL BUILDING 75-77 FA YUEN STREET MONG KOK KL HONG KONG

Product Ident GmbH
EU REP
Hoferstasse 9B, 71636 Ludwigsburg, Germany prodsg@libelleconsulting.com
APEX CE SPECIALISTS LIMITED
REP UK
89 Princess Street, Manchester, M1 4HT, UK info@apex-ce.com
Sept 2022
QSG1_A
58.03.005.0034