JOYROOM OR1149 3 in 1 Wireless Charging Station Instruction Manual
- June 12, 2024
- Joyroom
Table of Contents
JOYROOM OR1149 3-in-1 Wireless Charging Station
Product Information
The 3 in 1 Wireless Charging Station (Model No.: OR1149) is a versatile
charging solution that allows you to charge your phone, earphones, and Apple
Watch simultaneously. It features a compact design with separate charging
areas for each device, along with charging indicators for the phone and
earphones. The charging station also includes a Type-C charging input for easy
connectivity.
Package Contents
- 3 in 1 Wireless Charging Station
- USB Charging Cable
- Instruction Manual
Specifications
- Input: DC 5V/3A, 9V/3A, 12V/2A
- Output for Phone: 15W/10W/7.5W/5W
- Output for Earphone: 5W
- Output for Apple Watch: 2.5W
- Dimension: 82mm x 123mm x 130mm
- Charging Efficiency: 73%
- Transmission Distance: 6mm
- Work Frequency: 112-205KHz
Product Usage Instructions
Getting started
- Remove the product from the box.
- Check and count all the parts and contents against the list.
- Retain all packaging for future use.
Operation
- Connect the 3 in 1 Wireless Charging Station with the USB charging cable (included).
- Connect the other end of the cable to a power adaptor (NOT INCLUDED).
- The product enters the normal working state when the indicator flashes twice.
- The product enters standby mode when the indicator lights off.
Safety Notice
- Do not squeeze or collide with the product.
- Do not disassemble or expose to fire or water to avoid short-circuit or leakage.
- Avoid using the wireless charger in severely high temperatures, humidity, or corrosive environments to prevent damage to the circuits.
- Keep a distance of more than 20cm between the wireless charger and implanted medical devices (pacemaker, implantable cochlea, etc.) to avoid potential disruption to medical devices.
- Keep the wireless charger away from magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips to prevent magnetic card failure.
- Keep children away from the product to avoid accidents.
- Avoid exposing the wireless charger and receiver device to water and other liquids.
- Disconnect the power supply before cleaning the charger.
- Usage temperature: 0-45°C
- Usage humidity: 20-85% (40)
- The pictures in this manual are for illustration purposes only. The final product may vary.
FCC ID: 2A9QP-OR1149
Warning
This product should be used according to the provided instructions. Failure
to do so may result in damage to the product or other hazards.
Getting started
- Remove the product from the box.
- please retain all packaging after you have checked and counted all the parts and the contents against the list.
Package Contents
- 3 in 1 Wireless Charging Station
- USB Charging Cable
- Instruction Manual
Operation
Connect 3 to 1 Wireless Charging Station with the USB charging cable (Included) and the other end of the cable to the power adaptor (NOT INCLUDED), the product enters the normal working state once the indicator flashed twice and enters standby mode after the indicator lights off. Smart Phone: Place your Qi-enabled smartphone at the center of the wireless charging station， the blue LED indicator on, once your phone is fully charged, the LED indicator will turn off. Apple Watch: Place your Apple Watch in a way that the back of the watch makes contact with the watch charging area of the wireless charging station. Airpods/Samsung Earphones: Place your compatible Airpods or Samsung earphones Charging Case on the Earphone Charging Area, the blue LED indicator on, once your earphone is fully charged, the LED indicator will turn off.
Specifications
- Input: DC 5V/3A ,9V/3A ,12V/2A
- Output for Phone:15W/10W/7.5W/5W
- Output for Earphone: 5W
- Output for Apple Watch: 2.5W
- Dimension: 82mm x123mm x 130mm
- Charging efficiency: 73%
- Transmission distance：≤6mm
- Work frequency:112-205KHz
Safety Notice
- Don’t squeeze or collide.
- Don’t disassemble or put into the fire, water, to avoid short-circuit leakage.
- Don’t use wireless chargers in severe high temperatures, humidity or corrosive environments to avoid leakage of damaged circuits.
- Don’t place too close to magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips to avoid magnetic card failure.
- Keep more than 20cm between the implanted medical device (pacemaker, implantable cochlea, etc.) and the wireless charger to avoid potential disruption to medical devices.
- Keep children from the product in case they play with the wireless charger as a toy to avoid accidents.
- Keep the wireless charger and receiver device away from water and other liquids.
- To clean the charger, make sure the power supply is disconnected.
- Usage temperature: 0-45℃.
- Usage humidity: 20-85% (40℃)
- The pictures involved in this manual are all illustrations. The final product is subject to the actual object.
FCC ID:2A9QP-OR1149
Warning
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>