SILVERSTONE FARA 511 High Airflow ATX Gaming Chassis with Excellent Cooling Potential Installation Guide
- June 12, 2024
- SilverStone
Table of Contents
FARA 511
High airflow ATX gaming chassis with excellent cooling potential
Installation instructions based on model: SST-FA511-BG
Accessory Content
Motherboard support Motherboard standoff M3x6.5H-6-32 Mounting for PSU Screw- HW-6-32×6-BK Mounting for 3.5″ HDD Screw-P-6-32×5-BK Mounting for motherboard & 2.5″ SSD Screw-PW-M3x5-BK Graphics card bracket Mounting for graphics card bracket Cable ties Install standoffs Standoff socket wrench
INSTALLATION GUIDE
Remove side panels Install IO shield Install motherboard
Install PSU Graphics card and graphics card bracket installation Please adjust
the position of the graphics card bracket according to the size and
installation position of the graphics card 90 degree (vertical) installation
of graphics card Install 3.5” and 2.5” devices into the drive tray, then
insert them into the bottom drive cage There are two positions to install the
drive cage Install 2.5″ devices Install side panel
Connect front I/O cables Install radiators Install
fans CPU cooler height limit is 162mm, cooler is allowed to protrude the edge
of the motherboard by 56.1mm Graphics card limitations Graphics card length
limit is 360mm, width limit is 169mm PSU depth limitation 190mm (Drive cage
installed at the front position) 160mm (Drive cage installed at the rear
position) Radiator thickness limitation The total thickness for radiator and
fan is a total of 68.2mm
Warranty terms & conditions
Warranty terms & conditions
-
Product component defects or damages resulted from defective production is covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
a. Usage in accordance with instructions provided in the manual, with no misuse, overuse, or other inappropriate actions*.
b. Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c. Product is not modified or components replaced resulting in out of spec. operation.
d. Loss or damages resulted from conditions other than ones listed above are not covered under warranty. -
Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
-
Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
-
Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand purchaser
-
You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
-
If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone http://www.silverstonetek.com. Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website. Please visit http://www.silverstonetek.com. for the latest updates.
Additional info & contacts
For North America
usasupport(at)silverstonetek.com
SilverStone Technology in North America may repair or replace defective
product with refurbished product that is not new but has been functionally
tested. Replacement product will be warranted for remainder of the warranty
period or thirty days, whichever is longer. All power supplies should be sent
back to the place of purchase if it is within 30 days of purchase, after 30
days, customers need to initiate RMA procedure with SilverStone Technology in
USA by first downloading the “USA RMA form for end-users” form from the below
link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only support(at)silverstonetek.com
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty
details. SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe
Dist., New Taipei City 235 Taiwan R.O.C. +886-2-8228-1238 (standard
international call charges apply)
For Europe support.eu(at)silverstonetek.de
For China support(at)silverstonetek.com.cn
For Japan support_jp(at)silverstonetek.co.jp
For all other regions
support(at)silverstonetek.com
SilverStone Technology Co., Ltd.
www.silverstonetek.com
support@silverstonetek.com
References
- 無標題文件
- Support.eu
- Il motore di ricerca per risparmiare sui tuoi acquisti | Trovaprezzi.it
- Case e Alimentatori al miglior prezzo | Trovaprezzi.it
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>