BLAUPUNKT XTREME Plus Robotic Vacuum Cleaner User Manual

BLAUPUNKT XTREME Plus Robotic Vacuum Cleaner

Product Information

The Bluebot XTREME Plus is a robotic vacuum cleaner designed by Blaupunkt. It comes with various features and accessories to provide efficient cleaning. Here are the key product details:

• XTREME Plus robot
• Auto station for dust collection and charging
• Instruction manual
• Side Brush (4x / 2 pairs) – 1 installed + 1 extra
• Mop cloth support
• Mop (2x)
• Cleaning brush with knife
• Main brush cover (installed)
• Remote control
• Battery (x2)
• Dust bag 3L (2x)
• 2-in-1 combi watertank 210 ml dustbin 230 ml (installed)
• Main Brush (installed)

Product Usage Instructions

Safety Regulations
Please read and follow the safety instructions and precautions provided below:

• Read the instructions carefully and keep them for future reference.
• Follow the general safety regulations to avoid any damage to the product.

Product Assembly
To assemble the robot, follow these steps:

1. Install the side brushes by aligning the left and right brushes with the corresponding slots on the bottom casing. Press them until you hear a click sound.
2. Place the 2-in-1 combi watertank in the robot.
3. Before first-time use, fully charge the robot.
4. (Optional) Connect with the Bluebot app for additional features.
5. Start cleaning by selecting the desired cleaning mode.

Installation of Mopping Module
To install and remove the mopping module, follow these steps:

1. Paste the mopping cloth flat onto the bottom of the water tank.
2. When the robot finishes cleaning, press the button in the middle of the water tank to remove the mopping module backwards.
3. Empty the water in the water tank and clean the mopping cloth. Do not move or turn the robot over during cleaning.

For additional support, how-to videos, tips & tricks, FAQs, or contact details, visit www.blaupunktrobotics.eu/support.

SAFETY REGULATIONS

GENERAL SAFETY REGULATIONS:
Before using this product, please read the following safety instructions and follow all routine safety precautions. Please read the instructions carefully, please keep the instructions.
Any operation inconsistency with this instruction manual may cause damage to this product.

WARNING:

• Use only the original rechargeable battery and charging station specially equipped by the manufacturer. Non-rechargeable batteries are strictly prohibited, please refer to “product parameters” for battery specification information.
• It is forbidden to use the product in environments with open flames or fragile objects.
• It is forbidden to use the product in extremely hot (above 40 °C) or extremely cold (below 0 °C) environments.
• It is forbidden to use the products near burning or evenly hot object, for example a burning fireplace.
• Do not use this product in high temperature environments.
• It is forbidden to approach the opening and operating parts of the robot with  fingers, clothes, hair and any item for safety reasons. It is forbidden to use the products on wet or uneven ground.
• It is forbidden for the product to absorb any articles such as stones and waste paper that may clog the product.
• It is forbidden for the product to absorb any inflammable substances, such as petrol, toner and toner for printers. Prohibit the use of products in clean areas with flammable items.
• It is forbidden for the product to absorb any burning articles, such as cigarettes, matches, ashes and other articles that may cause fire.
• It is forbidden to place objects at the suction opening. Do not use the product when the suction port is blocked. Clean all possible blockage at the suction opening to ensure smooth air circulation at the suction opening.
• Use the power cord carefully to avoid damage. It’s forbidden to use the power cord to drag or pull the product and the product charging station. It’s forbidden to use the power cord as a handle. It’s forbidden to clamp the power cord in the crack of the door. It is forbidden to pull the power cord at sharp corners.
• Do not use a damaged charging/auto station.
• Even if the product has been severely damaged, burning of the product is prohibited, which may lead to explosion of the battery of the product.

NOTE:

• Only authorized technicians can disassemble this product. Users are not recommended to disassemble this product by themselves.

• This product can only use the power adapter provided by the factory. lf other adapters are used, the product may be damaged.

• Do not touch wires, sockets or power adapters when your hands are wet.

• Make sure no fabrics or bigger items roll into the product drive wheels.

• Do not place this product near cigarette butts, lighters and other smoldering fires.

• Please clean the product after charging.

• Do not bend wires excessively or place heavy objects and sharp objects on the machine.

• This product is an indoor household product. Do not use it outdoors.

• Do not sit on the product.

• Do not use this product (e.g. bathroom) in a wet environment.

• Before using this product, please remove all vulnerable items (e.g. glasses, lamps, etc.) on the ground as well as items (e.g. wires, paper sheets, curtains) that may entangle the side brushes and air suction passages.

• Do not put this product in a place where it is easy to fall (e.g. on desks and chairs, by the stair case).

• Please carefully check whether the power adapter is connected to the socket before use, otherwise the battery may be damaged.

• To prevent tripping, please inform other members of the house when this product works.

• Please empty the dust bin before using this product when the dust bin is full.

• Please remove the battery from the machine before the product is scrapped.

• Please make sure that this product is not powered on when removing the battery.

• Please recycle the discarded batteries safely.

• Recommended to block the staircase exit or areas where the robot may fall. The anti- drop sensors prevent the robot from tumbling down stars and steep drops. However, they may work less effectively when dirty or used on reflective/very dark-colored floors.

• To clean and maintain the robot and the auto station, you must turn off both. Pull out the power cord from the socket and disconnect the power supply first.

• Do not immerse the robot or the auto station in water for cleaning or rinse them with water.

• Do not whipe any part of the product with a damp cloth or any liquid.

• Do not use the mopping module on the carpet.

PRODUCT INFORMATION

 INSTALLATION OF THE ROBOT & AUTO STATION

AUTO STATION

• Lay the auto station on the flat ground over 5cm away from the wall, insert the power plug into the socket, meeting the requirements, and connect the power supply.

• Ensure that there are no obstacles within 1.5m in front of the auto station and 0.5m on both sides.

PRODUCT ASSEMBLY

• Install the brushes. Make the left side-brush (L) and the right-side brush (R) correspond to L and R on the bottom casing, keep pressing the side brushes.
  They are installed when you hear a “click” sound.
  

• Fully charge the robot (before 1st time use)

• Connect with Bluebook app (optional)

• Start cleaning

NOTE

• Please do not move the auto station without reason and keep it out of direct sunlight.
• If the auto station is relocated, the robot may fail in positioning and lose the map. When restarted, the robot will rebuild and memorise the map. In the rebuilt map the cleaning information for forbidden areas and other areas may have been lost.
• Direct sunlight will interfere with the recharging signal and consequently, the robot may be unable to return to the charging/ auto station.
• The robot cannot be used to remove liquids.
• If the battery level is less than 20% the machine will not work. Please charge it.
• The machine will return to the auto station automatically if the battery level is less than 20% when in use and will be powered  ff and then start cleaning automatically after the battery level reaches 80%.
• Please clear various wires (including the power line of the auto station) from the ground before use to avoid outage and damage of objects or wires when wires are dragged by the robot.

INSTALLATION OF MOPPING MODULE

1. Paste the mopping cloth flat onto the bottom of the water tank.

2. Fill the water tank: uncap the cover and fill with water.

3. Press and hold the button in the middle of the tank and push it horizontally along the rear of the robot. The module is correctly in place if you hear the sound of a “click”.
   

4. Remove the mopping module
   When the robot is finished working, press the button in the middle of water tank to remove the mopping module backwards, empty the water in the water tank and clean the mopping cloth (do not move or turn the robot over during cleaning).

NOTES FOR MOPPING MODULE

• Please do not use the mopping module after it has been left unused.
• For safety reasons, please be sure to remove the mopping module when it is being  charged or left unused.
• Please do not mop the carpet. Set a forbidden area in the Bluebot app to prevent the machine from going onto the carpet.
• To achieve a better mopping effect, the mopping module should be installed after take out and reassemble the mopping module according to step 3. Please do not move or turn the robot over, otherwise, it could fail in its positioning, lose its map and “forget” the forbidden areas that are programmed.
• The mopping function of the machine is intended for wiping and is not conducive to deep cleaning. It cannot remove intractable stains effectively and replace the labour force.
• Please don’t use any detergent in the watertank to prevent clogging.
• The robot cannot be used to remove liquids.

INSTALLATION BLUEBOT APP

BLUEBOT APPLICATION

• Fully charge robot
• Download Bluebot app
• Steps for registration
• Connect robot with app (steps)

1. Place the robot in the charging station to charge and make sure it’s fully charged before use.

2. Remove the robot from the charging station.

3. Make sure the Robot is on, by holding in the ‘On button’ for a few seconds on top of the robot. Wait until the robot has started fully.
   

4. Download the Bluebot app. The app can be found in the Appstore and Google Play.

5. Register a new account if you are not yet an existing user.

6. Open the Bluebot app and press the ‘+ icon’ to add your device.
   

7. Select the BLUEBOT XTREME PLUS (2.4+5GHZ) Select enter the password.

8. After your registration, make sure the robot is removed from it’s charging station. Turn on your Robot by pressing the ‘On button’ . After that is done, press both the ‘Home button’ and ‘On button’ simultaneously for more than 3 seconds connection.

9. Tick ‘Make sure the purple light blinks slowly’ when applicable and press ‘Next’
   

10. Press on the ‘Go to connect’ button in the bottom of your screen.

11. Select the ‘SmartLife xxx’ network from the list and return to the Bluebot app.

12. Your robot will now connect to the App.
    

USAGE OF THE ROBOT & AUTO STATION

REMOVE THE LIMIT BAR
Put the robot on the flat indoor ground, and remove the protection device of the limit bar at both ends of the front bumper.

CHARGING OF THE ROBOT

Press and hold the button for 3 seconds to start the robot, and then short- press the button robot is ready once fully charged.

• Fully charge the robot before starting cleaning.

• Before starting the cleaning, tidy away the wires and articles on the ground to avoid damage caused by winding, dragging and hitting during cleaning.

• It is suggested to start the robot at the auto station.

• When the battery is low during the cleaning, the robot will automatically return to the auto station for charging, and automatically return to the interrupted place to continue cleaning when the battery is full.

CLEANING MODE
After the robot is powered on, it will scan and generate the map and divide it into areas intelligently. Then sweep the areas one by one along the wall orderly, efficiently and thoroughly and plan the cleaning route in a bow/S shape. The robot will return to the charging station automatically after cleaning.

NOTE
Do not move the robot casually and frequently when it is cleaning. After moving, please put the robot near the original position. When it starts again, it will try to reposition itself. After successful positioning, it would follow the planned path and continue to work. If the positioning fails, the robot would abort previous mission, make a map and do the cleaning again.

SPOT CLEANING
When a local area needs a deep sweep, the user specifies a point on the map on the APP, the machine will automatically drive to the vicinity of the point, take the point as the center, and clean within 1.5m x 1.5m.

PARTIAL CLEANING
When the robot cannot be controlled by the mobile APP, please remove the robot to the place you want to clean. Long press the button for 3 seconds, and the robot will clean twice within the scope of 2mx2m centering on itself.

CLEANING SETTINGS

MORE OPTIONS
**Timer***
Set a timer to program the robot to clean at a certain time or day.

Manual
Control the robot manually with the remote control or use the Bluebot app on your phone as a remote control.

Find robot
Tap this button when you lost your robot and your robot will tell you where it is.

**Map management***
Use this function to manage your maps (5 max.).

Water regulation
Control the water regulation and choose “Low”, “Medium” or “High”. This will regulate how wet the mop will become when using the robot including the 2 in 1 electric- controlled water tank.

**Auto Boost***
Auto Boost will increase suction power when the robot gets more friction. This is designed to increase suction on carpets.

**Custom mode***
So the robot can remember per area what route to use for cleaning.

**Record***
View all your previous vacuum cleaning records. You can see how many m2 has been cleaned and the time it took. Here you can also load previously saved maps. Ideal when cleaning different area’s (upper floor for instance).

Voice and volume
Setup your language and change the volume.

Do not disturb mode
Here you can schedule an do not disturb time period.

**Consumables and maintenance***
Here you will find an overview of consumables and indicates when consumables need to be replaced or maintenance is required.

**More info***
Here you will find network and robot information

**Set wall / Resctricted Area***
Use this function to create no-go zones within the area that you are cleaning. You can draw virtual walls that blocks the robot from crossing. Or you create a restricted area for either vacuuming or mopping.

* Via Bluebot app only

MAINTENANCE

REPLACE THE DUST BAG
When the dust bag is full, please replace the dust bag in time.

CLEAN THE INFRARED LENS/CHARGING AND DUST COLLECTION SENSOR HEAD
Wipe them gently with a clean, soft, dry cloth. It is recommended to clean them once a month.

CLEAN THE FILTER SCREEN OF THE FAN
The filter screen of the fan is below the dust bag. If there is dust accumulation, wipe it gently with a clean, soft, dry cloth. It is recommended to clean them once a month.

CLEAN THE MAIN BRUSH
The main brush is a consumable item and should be cleaned at least once a week. It is recommended to replace the main brush every 6-12 months to ensure the cleaning effect.

• Reverse the robot, press the snap on the main brush cover, and remove the main brush cover and the main brush.

NOTE
Be careful when reversing the robot to prevent damage to the lidar laser.

• Cut off the hair twisted around on the main brush with the cleaning knife, and then clean the main brush with the cleaning brush with the other end of the cleaning knife.

• Reinstall the main brush and the main brush cover. Press and fasten the snap.

CLEAN/REPLACE THE SIDE BRUSH

• Turn over the machine and pull the side brush out and upwards
• Remove hair and dirt and reassemble the side brush.
• Make the left-side brush (L) and the right-side brush (R) correspond to L and R on the bottom casting, press L and R to reinstall them.

CLEAN THE SENSORS
Clean the sensors with a soft, dry mop, including:

• Three anti-dropping sensors at the bottom of the robot.
• Electric shock protector and the pins to connect with the charging station at the bottom of the robot (please cut the power off during cleaning)
• Signal transmission area of charging/auto station.

Auto Station:
Infrared lens X2
Charging and dust collection sensor plates X2

BATTERY

• The robot is furnished with high-performance lithium-ion batteries.
• To maintain battery performance, please keep the robot charged in daily use
• If the machine is left unused for any length of time, please shut down and keep it properly.
• Charge it at least every three months to avoid damaging batteries due to excessive discharge.

FIRMWARE UPGRADE

• Upgrade firmware using the Bluebot app. If new firmware is detected, upgrade it according to the report.
• The battery level should be ≥ 50% during firmware upgrade, so if needed the machine should be placed on the charging/ auto station to charge before the  rmware upgrade takes place.
• Power failure restart. When the button is not responding or can not be turned off, reset the button with the pin length for one second, and the robot will restart the power.

Clean the 2in1 water tank

• Press and hold the release button of the two-in-one water tank and at the same time pull it outwards.
  

• Open the dustbin by pressing the dustbin snap.

• Remove the filter screen clip.

• Take out the filter screen.

• Remove the dirt on the filter screen and screen clip with the cleaning brush.

• Turn on the tap to clean the dustbin and let it dry.

• Open the water tank cover and inject an appropriate amount of water.

• Please remove the water tank fittings from the machine according to the illustration and reverse it, remove the mop and clean it.

1. If the mop is too dirty, it will affect the effect of mopping, please clean it in time
2. Be sure to remove the mop for cleaning and dry it before installation. It is forbidden to clean the two in one water tank while powered on.
3. The mop is a consumable item and it is recommended to replace it every 3-6 weeks.

 BASIC PARAMETERS

ROBOT

AUTO STATION

USAGE LIMITATIONS

• The product is only used for floor cleaning in a home environment and cannot be used for outdoor (such as an open terrace), non-ground (such as a sofa), or a commercial or industrial environment.
• Please do not use the product in high areas (such as a balcony, open staircase, open terrace and furniture tops) without a protective fence.
• Please do not use the product at a temperature above 40°C or below 0°C or when there are liquids and sticky substances on the ground.
• Please hang up any cables on the ground before use to avoid being dragged by the robot.
• Please clear fragile objects and impurities (such as vases and plastic bags, etc.) from the ground to avoid damaging valuables when the robot is stuck or impacted slightly.
• People with physical, mental, or perceptual disorders (including children) are not allowed to use or operate the product.
• Children cannot use the product as a toy. Please keep children and pets away when the robot is working.
• Please keep the main brush and other cleaning tools out of reach of children.
• Please do not place objects (including children and pets) on a stationary or moving robot.
• Please keep hair, fingers, and other parts or pets away from the suction inlet when the robot is working.
• Please do not use the product to clean burning objects (such as burning cigarette ends etc.).
• Please do not use the product to clean long-piled carpet (some dark carpets may not be cleaned normally).
• Please prevent the robot from suctioning hard or sharp objects (such as waste decorative materials, glass and iron nails, etc.).
• Please do not move the robot by holding the protective cover of the laser distance sensor and collision bumper.
• Please clean or maintain the robot and the charging / auto station when shutdown or in the power-off state.
• Please do not wipe any part of the product using a wet cloth or any liquid.
• The LEDs emit very strong UV radiation. Don’t look directly into the LED light, UV radiation can harm your eyes. To prevent even slight exposure, wear protective eyewear.
• Keep out of reach of children.
• Please use the product according to the User Manual. Users should be responsible for any damages and injuries caused by improper use.

Battery and Charging:

• Please do not use a battery, auto station or charger provided by any third parties.
• Do not discard used batteries at will. Before discarding the sweeping and mopping robot, the power supply must be disconnected and the batteries should be taken out of the sweeping and mopping robot for environmental protection.
• Please do not dismantle, report or refit battery or auto station arbitrarily.
• Please keep the auto station away from a heat source.
• Please do not wipe or clean the auto station dirt using a wet cloth or wet hand.
• Please do not just abandon used batteries. Used batteries should be disposed of by a professional recycling agency.
• If the power cord is damaged or broken, please discard it immediately and replace it through official channels.
• Please ensure the robot shuts down during transportation and the product should be transported in its original packaging.
• If the robot is left unused for a long period, it should be fully charged and then placed in a cool and dry place. Charge the robot at least every three months to avoid damaging batteries due to excessive discharge.
• You may not use detergent products in the water tank, as this may result a blockage of the water supply to the mop.
• Do not disassemble, repair or refit the battery and auto station without permission.
• Do not pour water into the device or immerse it in water.

TROUBLESHOOTING

When the machine runs abnormally, the power indicator will blink in orange, and the machine will give a voice prompt when some faults occur. Please refer to the table below for a solution.

WARRANTY & RECYCLING

This product has 2 years warranty for manufacturing defects. The warranty period will be counted from the date of purchase of the product, according to purchase invoice. Product warranty only covers manufacturing defects, defects resulting from improper use are not covered in the warranty, such as (but not limited to) dropping the robot, improper transportation, connection to the mains power supply not in compliance with the voltage specified in this manual, insertion of unrelated objects and parts, such as plastic parts (caps, buttons, handles, latch locks, power cables, etc.) and metal parts (wires, motors, etc.) and natural wear of parts.
Also not covered are damages due to agents of nature, lightning, food, sea, oxidation, humidity etc.). The product will lose its warranty if it presents defects, which after analysis by our technicians, are characterized as being improperly used, used for professional use or for the purpose for which it is not intended (according to the Owner’s Manual). This warranty will be void if it is found that the device has been tampered with, has been repaired by a person or service not authorized by Blaupunkt. The guarantee is only valid with the receipt/invoice provided at purchase.
Blaupunkt undertakes to provide the above-mentioned services in the warranty period only in places where it maintains an authorized service. Consumers who are not located near an authorized service center should be responsible for the costs and risks of transport to the authorized service of their choice.
Natural ‘wear and tear’ is not covered under warranty.
This product is for domestic use only.

DISPOSAL AND RECYCLING
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

DISPOSAL

THIS APPLIANCE AND ITS ACCESSORIES AND BATTERY ARE RECYCLABLE
The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please dispose of this equipment at your applicable collection point for the recycling of waste electrical and electronic equipment. In the European Union and other European countries there are separate collection systems for used electrical and electronic products. By ensuring the correct disposal of this product, you will help prevent potential hazards to the environment and to human health, which could otherwise be caused by improper disposal of this product. The recycling of materials will help conserve natural resources. Please do not therefore dispose of your old electrical and electronic equipment with your household waste.
Do not dispose of batteries as household waste but take them to a battery recycling facility.
For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

blaupunktrobotics.eu
+31(0)885667700
support@blaupunktrobotics.eu

References

• Robotstofzuiger expert | Blaupunkt robotics
• Blaupunkt Bluebot Klantenservice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>