Danfoss ECL Comfort 120 Regulator 230V Med Timer Installation Guide
- June 13, 2024
- Danfoss
Table of Contents
Danfoss ECL Comfort 120 Regulator 230V Med Timer
Product Information
The ECL Comfort 120 (code no. 100B1200, 230 V a.c.) is a product designed for
installation and commissioning purposes. It has a size of 138 x 92 mm and
conforms to the IEC 6155 standard. The product has an EU declaration of
conformity which can be found at this
link
or a UK declaration at this
link.
For more information about the ECL Comfort 120, please visit the official
Danfoss website at www.danfoss.com.
Product Usage Instructions
Installation:
- Ensure that the ECL Comfort 120 is installed in a location with a maximum distance of 1.5 meters from the intended application.
- Refer to the installation guide provided for detailed instructions on connecting the product.
Commissioning:
- Follow the commissioning instructions provided in the installation guide to set up the ECL Comfort 120 for operation.
Note : For any additional information or troubleshooting, please refer to the user manual or contact customer support.
Installation
Commissioning
EU-declaration of conformity
https://store.danfoss.com/en/
Select: ECL Comfort 120 > Documents > EU Declaration:
https://assets.danfoss.com/approvals/latest/209599/ID430145378312-0101.pdf
or UK Declaration:
https://assets.danfoss.com/approvals/latest/209599/ID430145378312-0101.pdf
ECL Comfort 120: www.danfoss.com Climate Solutions •
danfoss.com • +45 7488 2222
Any information, Including, but not limited to information on the selection of
the product, its application or use, product design, weight, dimensions,
capacity or any other technical data in product manuals, catalogues
descriptions. advertisements, etc., and whether made available in writing or
orally. electronically, online or via download, shall be considered
informative, and is only binding if and to the extent, explicit reference is
made in a quotation or order confirmation. Danfoss cannot accept any
responsibility for possible errors in catalogs, brochures, videos, and other
material. Danfoss reserves the right to alter its products without notice.
This also applies to products ordered but not delivered provided that such
alterations can be made without changes to the form, fit or function Of the
product _ All trademarks in this material are property Of Danfoss A’S or
Danfoss group companies. Danfoss and the Danfoss logo are trademarks Of
Danfoss A’S. All rights reserved,
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>