Display Pros MODify Single Sided Kit 04 User Guide
- June 13, 2024
- Display Pros
Table of Contents
**Display Pros MODify Single Sided Kit 04 User Guide
**
Product Instruction
MODify™ is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease.
MODify Single Sided Kit 04 is a versatile retail display solution that consists of three slatwall panels, each featuring push-fit graphic headers. With this kit, you can easily personalize and MODify it by incorporating various fixtures or furniture, allowing you to highlight your products in a way that best suits your needs.
MODify Single Sided Kits should be mounted to a wall or structure for safety and stability.
We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications
features and benefits
Base Kit includes:
- Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
- Heavy-duty aluminum frame, steel base
- Steel, slotted uprights
- Three single sided 35”W x 96”H slatwall panels
- Three 35”W x 11”H SEG push-fit graphic headers
- Non-rolling base
- Display is easy to assemble and install
- Lifetime hardware warranty against manufacturer defects
Optional Accessories Include:
- Towel bars.
- U bars
- Faceout bars
- Slatwall hooks
- Waterfalls
- Shelves
dimensions
Hardware
Assembled unit:
110”W x 96”H x 20.50”D
2794mm(w) x 2438.4mm(h) x 520.7mm(d)
Approximate Weight:
259 lbs / 117.48 kg
Shipping
Packing case(s):
1 Box
Shipping dimensions:
(96″L x 20″H x 24″D)
2438.4mm(l) x 508mm(h) x 609.6mm(d)
Approximate shipping weight:
332 lbs / 149.685 kg
additional information
Powder coat color options:
Wood laminate color options:
MODify Accessories
All Accessories available in white, black, or silver
Slotwall Accessories
-
MFY-SLT-HK
4″, 6″, 8″, 10″ & 12 -
MFY-SLT-FC
6″, 8″, 10″ & 12″ -
**MFY-SLT-WTR-16-7
**
U-Bar Accessories
-
MFY-TWL-FC
6″, 8″ & 10 -
MFY-UBR-FC
6″, 8″ & 10″
Shelf and Hanger Bars
-
MFY-36-12-SHELF
-
MFY-SLF-36-12-HB
-
MFY-SLT-TWL-36-3
-
MFY-UBR-36-12
-
MFY-DB-36-17
Tools Required
-
MULTI HEX KEY (INCLUDED)
-
PHILLIPS SCREW DRIVER (NOT INCLUDED)
-
9/16″ SOCKET WRENCH (NOT INCLUDED)
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your
thumb, then push the SEG bead into the middle of the run (5-8) and work your
way around the perimeter of the frame until all beading is pushed in properly;
if necessary, go around the perimeter again to ensure beading is secure in the
extrusion profile.
Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves.
Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perime
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip
lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If
washing is necessary, use a commercial size front-loading washing machine,
gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended
to prevent shrinkage
SETUP INSTRUCTIONS
MFY-BOLT-375-16-2.5
QTY | IMAGE | DESCRIPTION |
---|---|---|
6 | 1973MM (77.68in) OF SWC EXTRUSION | |
512MM (20.16IN) SUPPORT LEG | ||
4 | 3/8-16 x 2.51 bolt | |
1 | 2350MM (92.52in) UPRIGHT RIGHT | |
2 | 2350MM (92.52in) OF 830 UPRIGHT MIDDLE | |
1 | 2350MM (92.52in) UPRIGHT LEFT |
MFY-BOLT-375-16-2.5
SETUP INSTRUCTIONS
STEP 1
BOLT UPRIGHTS TO FEET
QTY | IMAGE | DESCRIPTION |
---|---|---|
3 | 883MM (34.76in) OF SWC EXTRUSION | |
3 | 883MM (34.76in) OF 835 DOUBLE SIDEDSEG EXTRUSION -WITH CAM LOCKSBOTH ENDS | |
6 | WALL BRACKET |
CROSS BRACE SITS ON SUPPORT LEG
SLOT WALL TOP CHANNEL
IMPORTANT! MAKE A HALF TURN TO LOCK EXTRUSIONS
WALL MOUNT CLIPS
STEP 5: LOCK TOP CROSS BRACE (TEMPORARY INSTALLED) TO ALIGN WALL MOUNT CLIPS
Disclaimer: Unit must be permanently secured and fastened to wall or other structure for stability.
QTY | IMAGE | DESCRIPTION |
---|---|---|
1 | 883MM (34.76in) OF SWC EXTRUSION | |
1 | 883MM (34.76in) OF 835 DOUBLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH |
ENDS
13| | 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION
2| | 883MM (34.76in) OF SWC EXTRUSION
2| | 883MM (34.76in) OF 835 DOUBLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH
ENDS
26| | 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION
SLOTWALL 005
SLOT WALL TOP CHANNEL
STEP 7
REMOVE TOP CROSS BRACE (TEMPORARY INSTALLED)
SLOTWALL 005
SLOT WALL TOP CHANNEL
QTY | IMAGE | DESCRIPTION |
---|---|---|
3 | 36in WIDE X 17.25in DEEP – DROP-IN BASE PAN | |
3 | 883MM (34.76in) OF 835 DOUBLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH |
ENDS
3| | (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub
print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone
beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH
LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)
2| | 7MM SEG PLASTIC END CAP FOR 831 EXTRUSION
2| | 7MM SEG PLASTIC END CAP FOR 830 EXTRUSION
LOOSEN END CAP TO ATTACH TOP CROSS BRACE
THEN PRESS ALONG THE PERIMETER EDGE
MFY-36-17-BASE-PAN
Kit Hardware BOM
ITEM | COMPONENTS | QTY | DESCRIPTION |
---|
| 004-883| 6| 883MM (34.76in) OF SWC EXTRUSION
| 004-1973| 6| 1973MM (77.68in) OF SWC EXTRUSION
| 005-879| 39| 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION
| 824-512| 4| 512MM (20.16IN) SUPPORT LEG
| 830-2350| 2| 2350MM (92.52in) OF 830 UPRIGHT MIDDLE
| 830-EC| 2| 7MM SEG PLASTIC END CAP FOR 830 EXTRUSION
| 831-2350| 1| 2350MM (92.52in) UPRIGHT LEFT
| 831-2350| 1| 2350MM (92.52in) UPRIGHT RIGHT
| 831-EC| 2| 7MM SEG PLASTIC END CAP FOR 831 EXTRUSION
| 835-883-01-01| 9| 883MM (34.76in) OF 835 DOUBLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS
| MFY-BOLT-375-16-2.5| 4| 3/8-16 x 2.5″L bolt
| MFY-BRKT3| 6| WALL BRACKET
| MFY-DB-36-17| 3| 36in WIDE X 17.25in DEEP – DROP-IN BASE PAN
Kit Graphics BOM
ITEM | COMPONENTS | QTY | DESCRIPTION |
---|---|---|---|
MFY-SS-04-A-G | 1 | (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish |
size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2
silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″
NOTCH LEFT & RIGHT BOTTOM HORIZONTALSIDE CORNERS)
| MFY-SS-04-B-G| 1| (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish
size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2
silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″
NOTCH LEFT & RIGHT BOTTOM HORIZONTALSIDE CORNERS)
| MFY-SS-04-C-G| 1| (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish
size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2
silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″
NOTCH LEFT & RIGHT BOTTOM HORIZONTALSIDE CORNERS)