AEG BPE748380T Built-In Single Electric Oven User Manual

June 13, 2024
AEG

AEG BPE748380T Built-In Single Electric Oven

AEG-BPE748380T-Built-In-Single-Electric-Oven

Welcome to AEG! Thank you for choosing our appliance

  • In our drive to be sustainable, we are reducing paper assets and provide full user manuals online. Access your full user manual at aeg.com/manuals
  • Get usage advice, brochures, trouble shooter, service and repair information at aeg.com/support
  • For more recipes, hints, troubleshooting download My AEG Kitchen app.

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-6

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the product in a safe way and understand the hazards involved. Children of less than 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
  • Children should be supervised to ensure that they do not play with the appliance and mobile devices with My Electrolux Kitchen / My AEG Kitchen (if applicable).
  • Keep all packaging away from children and dispose of it appropriately.
  • WARNING: Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts become hot.
  • Children shall not carry out cleaning and user maintenance of the appliance without supervision.
  • If the appliance has a child safety device, it should be activated.
  • This appliance is for cooking purposes only.
  • This appliance is designed for single household domestic use in an indoor environment.
  • This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
  • WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
  • Always use oven gloves to remove or put in accessories or ovenware.
  • Always cook with the oven door closed.
  • To remove the shelf supports first pull the front of the shelf support and then the rear end away from the side walls. Install the shelf supports in the opposite sequence (if applicable).
  • Do not use a steam cleaner to clean the appliance.
  • Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass.
  • WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
  • Use only the food sensor (core temperature sensor) recommended for this appliance (if applicable).
  • Remove all accessories and excessive spillage from the appliance before the pyrolytic cleaning.

SAFETY INSTRUCTIONS

Installation and Electrical connection

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-1AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-2

WARNING!

  • Only a qualified person must install and connect this appliance.
  • Follow the installation instructions supplied with the appliance.
  • Install the appliance in a safe and suitable place that meets installation requirements.
  • Do not use the appliance before installing it in the built-in structure.
  • Keep the minimum distance from other appliances and units. Before mounting the appliance, check if the oven door opens without restraint.
  • Do not install or use a damaged appliance.
  • Remove all the packaging.
  • Always take care when moving the appliance as it is heavy. Do not pull the appliance by the handle. Always use safety gloves and enclosed footwear.
  • The appliance is equipped with an electric cooling system. It must be operated with the electric power supply.

WARNING!

  • Risk of fire and electric shock.
  • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
  • The appliance must be earthed. Always use a correctly installed shockproof socket.
  • Do not use multi-plug adapters and extension cables.
  • This appliance is supplied without a main plug and a main cable.
  • Do not let mains cables touch or come near the appliance door or the niche below the appliance, especially when it operates or the door is hot.
  • Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
  • The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
  • For the section of the cable refer to the total power on the rating plate. You can also refer to the table:

Cable types applicable for installation or replacement for Europe
H07 RN-F, H05 RN-F, H05 RRF, H05 VV-F, H05 V2V2-F (T90), H05 BB-F

Total power (W) Section of the cable (mm²)

  • maximum 1380 3 x 0.75
  • maximum 2300 3 x 1
  • maximum 3680 3 x 1.5

Use and Maintenance

WARNING!

  • Risk of injury, burns, electric shock, fire, explosion or damage to the appliance.
  • Do not change the specification of this appliance.
  • Do not let the appliance stay unattended during operation. Deactivate the appliance after each use.
  • Make sure that the ventilation openings are not blocked.

If the appliance is installed behind a furniture panel (e.g. a door) make sure the door is never closed when the appliance operates. Heat and moisture can build up behind a closed furniture panel and cause subsequent damage to the appliance, the furniture or the floor. Do not close the furniture panel until the appliance has cooled down after use. Be careful when you open the appliance door while the appliance is in operation. Hot air can release. Do not operate the appliance with wet hands or when it has contact with water. Do not apply pressure on the open door. Be careful when you remove the door from the appliance. The door is heavy. Do not use the appliance as a work surface or as a storage surface. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. When you place food into hot oil, it may splash. Open the appliance door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air. Do not let sparks or open flames to come in contact with the appliance when you open the door. Do not share your Wi-Fi password (if applicable).
To prevent damage or discoloration to the enamel:

  • do not put ovenware or other objects in the appliance directly on the bottom.
  • do not put aluminium foil directly on the bottom of cavity of the appliance.
  • do not put water directly into the hot appliance.
  • do not keep moist dishes and food in the appliance after you finish the cooking.
  • be careful when you remove or install the accessories.

Use a deep pan for moist cakes. Fruit juices cause stains that can be permanent. Discoloration of the enamel or stainless steel has no effect on the performance of the appliance.Clean regularly the appliance to prevent the deterioration of the surface material. Before maintenance, deactivate the appliance and disconnect from the mains. Do not clean the catalytic enamel (if applicable) with detergents. Make sure the appliance is cold. There is the risk that the glass panels can break. Replace immediately the door glass panels when they are damaged. Contact the Authorised Service Centre. Clean the appliance with a moist soft cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. Do not clean the catalytic enamel with detergents (if applicable). If you use an oven spray, follow the safety instructions on its packaging. Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination. Use only lamps with the same specifications. This product contains a light source of energy efficiency class G. To repair the appliance contact the Authorised Service Centre. Use original spare parts only.

Pyrolytic cleaning

WARNING!
Risk of Injury / Fires / Chemical Emissions (Fumes) in Pyrolytic Mode. Do not start the Pyrolysis if the Plus Steam button is pressed in ( if applicable).
Before carrying out the pyrolytic cleaning and initial preheating remove from the oven cavity:

  • any excess food residues, oil or grease spills / deposits.
  • any removable objects (including shelves, side rails etc., provided with the product) particularly any non-stick pots, pans, trays, utensils etc.
  • Pyrolytic cleaning is a high temperature operation that can release fumes from cooking residues and construction materials, as such consumers are advised to:
  • provide good ventilation during and after each pyrolytic cleaning.
  • provide good ventilation during and after the first use at maximum temperature operation.

If there are other appliances installed in the same cabinet, do not use them at the same time as the pyrolytic cleaning. It can cause damage to the oven. Fumes released from all pyrolytic ovens / cooking residues as described are not harmful to humans, including children, or persons with medical conditions. Keep away small pets from the appliance during and after the pyrolytic cleaning and initial preheating. Birds and reptiles can be highly sensitive to the temperature changes and emitted fumes. Non-stick surfaces on pots, pans, trays, utensils etc., can be damaged by the high temperature pyrolytic cleaning operation of all pyrolytic ovens and can be also a source for low level harmful fumes.

Disposal
WARNING! Risk of injury or suffocation. Disconnect the appliance from the mains supply. Cut off the mains electrical cable close to the appliance and dispose of it. Remove the door catch to prevent children or pets from becoming trapped in the appliance.

PRODUCT DESCRIPTION

General overview

  1. Control panel
  2. Display
  3. Socket for the food sensor
  4. Heating element
  5. Lamp
  6. Fan
  7. Shelf support, removable
  8. Shelf positions

CONTROL PANEL

Control panel overview

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-8

  1. ON / OFF: Press and hold to turn the appliance on and off.
  2. Menu: Lists the appliance functions.
  3. Favourites: Lists the favourite settings.
  4. Display: Shows the current settings of the appliance.
  5. Lamp switch: To turn the lamp on and off.
  6. Fast Heat Up: To turn on and off the function: Fast Heat Up.

Display

Display with key functions set.

  • A. Wi-Fi
  • B. Time of day
  • C. START/STOP
  • D. Temperature
  • E. Heating functions
  • F. Timer
  • G. Food sensor (selected models only)

Display indicators

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-10

BEFORE FIRST USE

Initial Cleaning

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-11

  • Remove all accessories and removable shelf supports from the appliance.
  • Clean the appliance and the accessories only with a microfibre cloth, warm water and a mild detergent.
  • Place the accessories and the removable shelf supports in the appliance.

First connection

  • The display shows welcome message after the first connection.
  • You have to set: Language, Display brightness, Key tones, Buzzer volume, Time of day.

Wireless connection

  • To connect the appliance you need:
  • Wireless network with the Internet connection.
  • Mobile device connected to the same wireless network.
  • Step 1 To download My AEG Kitchen app: Scan the QR code on the rating plate with the camera on your mobile device to be redirected to AEG Homepage. The rating plate is on the front frame of the appliance cavity. You can also download the app directly from the app store.
  • Step 2 Follow the app onboarding instructions.
  • Step 3 Turn on the appliance.
  • Step 4 Press: . Select: Settings / Connections.
  • Step 5 – slide or press to turn on: Wi-Fi.
  • Step 6 The appliance wireless module starts within 90 sec.
  • Frequency: 2.4 GHz WLAN 2400 – 2483.5 MHz
  • Protocol: IEEE 802.11b DSSS, 802.11g/n OFDM
  • Max Power: EIRP < 20 dBm (100 mW)
  • Wi-Fi module: NIUS-50

United Kingdom is covered by the provision of UK SI 2017, No 1206: Radio Equipment Regulations.

Software licences
The software in this product contains components that are based on free and open source software. AEG acknowledges the contributions of the open software and robotics communities to the development project.
To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, visit: http://aeg.opensoftwarerepository.com (folder NIUS).

Initial preheating
Preheat the empty oven before the first use.

  • Step 1 Remove all accessories and removable shelf supports from the oven.
  • Step 2 Set the maximum temperature for the function: . Let the oven operate for 1 h.
  • Step 3 Set the maximum temperature for the function: . Let the oven operate for 15 min.
  • The oven can emit an odour and smoke during preheating. Make sure that the room is ventilated.

DAILY USE

How to set: Heating functions

  • Step 1 Turn on the oven. The display shows the default heating function.
  • Step 2 Press the symbol of the heating function to enter the submenu.
  • Step 3 Select the heating function and press: OK . The display shows: temperature.
  • Step 4 Set: temperature. Press: OK.
  • Step 5 Press: START. Food Sensor – you can plug the sensor at any time before or during cooking.
  • STOP- press to turn off the heating function.
  • Step 6 Turn off the oven.

How to set: Assisted Cooking

  • Step 1 Turn on the oven.
  • Step 2 Press: .
  • Step 3 Press: . Enter: Assisted Cooking.
  • Step 4 Choose a dish or a food type.
  • Step 5 Press: START.

Heating functions

STANDARD

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-18 AEG-BPE748380T-Built-In-Single-Electric-Oven-
FIG-19 AEG-BPE748380T-Built-In-Single-Electric-
Oven-FIG-20

SPECIALS

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-21 AEG-BPE748380T-Built-In-Single-Electric-Oven-
FIG-22

Notes on: Moist Fan Baking
This function was used to comply with the energy efficiency class and ecodesign requirements (according to EU 65/2014 and EU 66/2014). Tests according to:

  • For EU: IEC/EN 60350-1
  • For UK: BS EN 60350-1

The oven door should be closed during cooking so that the function is not interrupted and the oven operates with the highest energy efficiency possible. When you use this function the lamp automatically turns off after 30 sec. For general energy saving recommendations refer to “Energy Efficiency” chapter, Energy Saving. This function is designed to save energy during cooking. When you use this function, the temperature in the cavity may differ from the set temperature. The heating power may be reduced.

CLOCK FUNCTIONS

Clock functions description

  • Clock function Application
    • Cooking time: To set the length of cooking. Maximum is 23 h 59 min.
    • End action: To set what happens when the timer ends counting.
    • Delayed start: To postpone the start and / or end of cooking.
    • Time extension: To extend cooking time.
    • Reminder: To set a countdown. Maximum is 23 h 59 min. This function has no effect on the operation of the appliance.
    • Uptimer: Monitors how long the function operates. Uptimer – you can turn it on and off.

USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.

Food Sensor
Food Sensor – measures the temperature inside the food. You can use it with every heating function.

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-23

How to use: Food Sensor

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-24

WARNING!
There is a risk of burns as Food Sensor becomes hot. Be careful when you unplug it and remove it from the food.

CARE AND CLEANING

WARNING!
Refer to Safety chapters.

Notes on cleaning

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-25

How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.

CAUTION!
If there are other appliances installed in the same cabinet, do not use them at the same time as this function. It can cause damage to the oven.

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-26AEG-BPE748380T-Built-In-Single-Electric-Oven-
FIG-27

TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

What to do if…

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-28

Power cut always stops cleaning. Repeat cleaning if it’s interrupted by power failure.

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-29

How to manage: Error codes
When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-30AEG-BPE748380T-Built-In-Single-Electric-Oven-
FIG-31

Service data

  • If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre.
  • The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.

We recommend that you write the data here

  • Model (MOD.) …………………………………..
  • Product number (PNC) …………………………………..
  • Serial number (S.N.) …………………………………..

ENERGY EFFICIENCY

Product Information and Product Information Sheet

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-32

For UK: BS EN 60350-1 – Household electric cooking appliances – Part 1: Ranges, ovens, steam ovens and grills – Methods for measuring performance.

Energy saving

  • The appliance has features which help you save energy during everyday cooking.
  • Make sure that the appliance door is closedwhen the appliance operates. Do not open the appliance door too often during cooking.
  • Keep the door gasket clean and make sure it is well fixed in its position.
  • Use metal cookware to improve energy saving.
  • When possible, do not preheat the appliance before cooking.
  • Keep breaks between baking as short as possible when you prepare a few dishes at one time.

Cooking with fan
When possible, use the cooking functions with fan to save energy.

Residual heat

  • If a programme with Duration is activated and the cooking time is longer than 30 min, the heating elements automatically turn off earlier in some appliance functions.
  • The fan and lamp continue to operate. When you turn off the appliance, the display shows the residual heat. You can use that heat to keep the food warm.
  • When the cooking duration is longer than 30 min, reduce the appliance temperature to minimum 3 – 10 min before the end of cooking. The residual heat inside the appliance will continue to cook.
  • Use the residual heat to warm up other dishes.

Keep food warm
Choose the lowest possible temperature setting to use residual heat and keep a meal warm. The residual heat indicator or temperature appears on the display.

Cooking with the lamp off
Turn off the lamp during cooking. Turn it on only when you need it.
Moist Fan Baking
Function designed to save energy during cooking. When you use this function the lamp automatically turns off after 30 sec. You may turn on the lamp again but this action will reduce the expected energy savings.

Menu

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-34

Submenu for: Cleaning

Submenu Application

  • Pyrolytic cleaning, quick: Duration: 1 h.
  • Pyrolytic cleaning, normal: Duration: 1 h 30 min.
  • Pyrolytic cleaning, intense: Duration: 3 h.

Submenu for: Options

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-40

Submenu for: Connections

Submenu Description

  • Wi-Fi: To enable and disable: Wi-Fi.
  • Remote operation: To enable and disable remote control. Option visible only after you turn on: Wi-Fi.
  • Auto remote operation: To start remote operation automatically after pressing START. Option visible only after you turn on: Wi-Fi.
  • Network: To check network status and the signal power of: Wi-Fi.
  • Forget network: To disable current network from auto connection with the appliance.

Submenu for: Setup

Submenu Description

  • Language: Sets the appliance language.
  • Display brightness: Sets the display brightness.
  • Key tones: Turns the tone of the touch fields on and off. It is not possible to mute the tone for: .
  • Buzzer volume: Sets the volume of key tones and signals.
  • Time of day: Sets the current time and date.

Submenu for: Service

Submenu Description

  • Demo mode: Activation / deactivation code: 2468
  • Software version: Information about software version.
  • Reset all settings: Restores factory settings.

IT’S EASY!

AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-36

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

aeg.com. 867380205-8-082023.
AEG-BPE748380T-Built-In-Single-Electric-Oven-FIG-41

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals