Club 3D CAC-1921 36Watt Car charger Installation Guide
- June 13, 2024
- Club-3D
Table of Contents
Club 3D CAC-1921 36Watt Car charger Installation Guide
You should have:
- CAC-1921 Notebook / Laptop Car Charger 36 Watt
- QIG, Quick Installation Guide (or download link)
The Club 3D CAC-1921 is a high-performance and fashionable design max. 36Watt Car charger with QC3.0 and Power Delivery (PD) support. With this charger, it is feasible for you to charge any devices (eg: digital cameras, PDAs,notebook computer, mobile phones, USB accessories) with your car when it is in necessity. It is equipped with three USB connectors (one USB Type-C connector and two USB Type-A connector) for power. This product allows three devices to be charged at the same time, and the product provides the maximum output of 36 watts. The USB-C port is specially designed for Type-C supported devices. Ensuring busy travelers can stay productive on the move without waiting around for hours. Built-in safeguards protectyour devices against excessive current, overcharging and overheating(OCP-OTP-SCP-OVP).
Operation Procedures
- Plug the Car Charger into the car cigarette lighter Observe LED light turns On.
- Connect your device(s) to the output port for charging.
- Please unplug the car charger after the electronic equipment is fully charged.
WARNING:
-
Please plug the car charger after starting the car.
-
Please pull the car charger out after use or car flameout.
Note: Our products have protection functions, and the twotips above are suggestions just for safety. -
Do not use the car charger with electronic products which own over-charging specifications, so as to avoid any problems caused by specification mismatching.
-
Car charger will be a little heated in the use process, and it’s a normal phenomenon that the temperature is less than 60 degree Celsius or 140 Fahrenheit under normal room temperature.
-
Please make sure that you use USB cables with the correct Power rating for this product ! Cables with lower power rating will cause slow charging ! Please consult your Club 3D representative for the correct cable.
-
When the car charger stops working under over-current, over-temperature or short-circuit protection, please unplug the device after it automatically returns to work, then you need to check whether the device is compatible with this charger.
-
Do not let the car charger close to fire, such as stove, candles etc.
-
Do not let the car charger soak into liquid, such as swimming pool, bathtub, etc.
-
Do not wash the car charger with corrosive cleaner.
-
If the car charger cannot work properly, please contact your supplier from whom you purchased this product.
Warning Safe Usage – Product Only to be used at altitude 2000 meters/6562 feet and below.
WARNING:
A. Please plug the car charger after starting the car.
B. Please pull the car charger out after use or car flame out
Disclaimer: While we endeavour to provide the most accurate, up-to-date
information available, the content on this document may be out of date or
include omissions, inaccuracies or other errors. Therefore Club 3D does not
accept any rights claimed on the content of this document. Please refer to a
full overview of our Legacy Terms and Conditions on www.club-3d.com. All other
brand names are trademarks or registered trademarks and are the property of
their respective owners. All content is subject to change without prior
notice. Copyright © 2023, Club 3D B.V. www.club-3d.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>