dewenwils HODT12A Outdoor Light Sensing Timer Instruction Manual

dewenwils HODT12A Outdoor Light Sensing Timer

Product Information

The Outdoor Light Sensing Timer is a device designed to automatically control outdoor lights based on the surrounding light conditions. It is equipped with a light sensor that detects ambient light levels and adjusts the operation of connected lights accordingly.

• SKU: HODT12A
• Instruction Manual: [Click here to download the instruction  manual]

Warranty: The product comes with a Year Limited Warranty for materials and workmanship from the purchase date. Please note that the warranty does not cover damage caused by personal misuse or improper installation.

Product Usage Instructions

1. Before operating the Outdoor Light Sensing Timer, carefully read and understand all the instructions provided in the instruction manual.
2. Ensure that the device is properly installed and securely connected to the power source.
3. Place the light sensor in a location where it can accurately detect ambient light levels. Avoid obstructing the sensor with objects or placing it in areas with excessive shade.
4. Set the desired operating mode using the control buttons or dials provided on the timer. Refer to the instruction manual for detailed information on different modes and settings.
5. Once the timer is set, it will automatically control the connected outdoor lights based on the detected light levels. The lights will turn on when it gets dark and turn off when it becomes sufficiently bright.
6. If desired, you can manually override the timer settings and control the lights independently.
7. Regularly check and maintain the Outdoor Light Sensing Timer to ensure proper functioning. Clean the sensor periodically and inspect all connections for any signs of damage or wear.
8. If you encounter any issues or require assistance, please contact our dedicated customer service team. Provide your Order ID and Name for better assistance.

Please pay attention to the warning signs Read the instructions with caution before operating and keep it properly

Warning : To reduce the risk of fire, electric shock or personal injury, please strictly follow the instructions.

1. The timer must be mounted in a vertical position with the receptacles facing downward and at least 2ft above the ground level when in outdoor use.
2. Do not connect any devices which may exceed the maximum ratings of this timer.
3. Do not immerse in water.
4. Children are not allowed to use the timer without supervision.
5. Do not disassemble or repair the product, but only by authorized service personnel.
6. Please always unplug and store indoors when not in use.

Button Layout

1. Timer dial:
   2 to 8 hours or dusk to dawn and daily repeat function.

2. Power :
   Power indicator light indicates if the timer is turned on or off.

3. Sensor: Sensor will turn timer on at dusk and off at dawn.
   Outlets:
   Plug the lights or devices to be controlled by the timer into outlet.

Operating Instructions

• OFF : Power is OFF to attached devices
• ON : Power is ON to attached devices
• Dusk – Dawn : Power will turn on at dusk and remain on until dawn
• 2 Hrs : Power will tum on at dusk and remain on for 2 hours
• 4 Hrs : Power will tum on at dusk and remain on for 4 hours
• 6 Hrs : Power will tum on at dusk and remain on for 6 hours
• 8 Hrs : Power will tum on at dusk and remain on for 8 hours

The cycle repeats every 24 hours

Notes

1. The timer is daily repeat after setting, in case of power failure, it will stop operating. Once power is restored, reset the desired operating mode as the operating instructions.
2. Once programming activates at dusk in the 2H, 4H, 6H, or SH Mode, the program cycle will repeat until the timer is reset. Headlights, porch lights, street lamps and other external lighting sources will not interfere with the active timer program.
3. n the Dusk- Dawn Mode, temporary light sources like headlights, porch lights and other external light sources will not interfere with the photocell function unless the external light source is on for more than 15 minutes. In that case, the timer will shut off until darkness is restored.
4. When set to “ON”, the timer will provide continual power to attached devices until the timer is switched to “OFF”, or to any of other operating modes.

Specifications

• Input Voltage:
  • 125VAC, 60Hz
• Cord :
  • SJTW 14/3C
• Max Power Rating:
  • 15A Resistive
  • 1 000W Tungsten
  • 500VA Electronic Ballast
  • 1/2HP
  • 120Vac 60Hz 8.3A Ballast

Safety Information

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

Safety Information
Federal Communications Commission Interference Statement

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• this device may not cause interference,
• this device must accept any interference, including interference that may cause undesired operation of the device.

FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

One-Year Limited Warranty

Supported by our professional R&D team and QC team, we provide One Year Warranty for materials and workmanship from the purchase date. Please note that the warranty does not cover damage caused by personal misuse or improper installation.
Please attatch your Order ID and Name so that our dedicated customer service team can help you better.

Made in China

Documents / Resources

| dewenwils HODT12A Outdoor Light Sensing Timer [pdf] Instruction Manual
HODT12A, HODT12A Outdoor Light Sensing Timer, Outdoor Light Sensing Timer, Light Sensing Timer, Sensing Timer, Timer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>