dewenwils HCSL01C LED String Light Instruction Manual
- June 5, 2024
- dewenwils
Table of Contents
dewenwils HCSL01C LED String Light
SAFETY WARNINGS
- Keep the product out of reach for babies, children and pets in case of fire, burns and electric shock.
- Do not turn unwrapped or messy lights on as the accumulative heat couldn’t give out promptly and cause fire.
- Do not place the string lights near gas, heaters, fireplaces, candles or other ignitions. It is forbidden to be put on carpets, curtains and other furniture or cover it with cloth, paper, and any other material while the power is on.
- Do not secure wires with staples, nails or sharp hooks. Please close doors or windows carefully to prevent insulating layer damage.
- Do not hang ornaments on the product as they the wires may break off due to heavy weight.
DAILY USE AND MAINTENANCE
- Inspect the product carefully before using. Discard the product if there is any damage to the wires or lights.
- This LED String Light is rated 2.4 Watts. Connect other decorative outfits up to 216 Watts in total. Do not overload during use.
- This product adopts overload protection (fuse). A blown fuse indicates an overload or short circuit situation. If the fuse blows, unplug the string lights and any additional strings that connected to it. Replace the fuse according to the replacement instruction, then check if it works. If the replacement fuse blows again, it may show short circuit and you should discard the product.
- Do not use it with bulbs missing and missing bulbs should be added immediately.
- When hanging on a tree, the tree should be well secured and stable.
- After use, remove the product gently to avoid any scratches to the wires or lights.
- Do not perform any troubleshooting or maintenance for broken lamps when the power is on.
- When not in use, unplug the product, keep it in a cool dry place and avoid direct sun exposure.
REPLACEMENT INSTRUCTION
- Unplug the product before changing fuses. Grasp the plug and remove it from the outlet instead of pulling the cord.
- To avoid risk of fire, do not replace attachment plug. Discard product if the attachment plug is damaged.
Fuse Replacement
- a. Open the fuse cover on the plug and remove the burn fuse.
- b. Install the new 3 Amp 125 Volt fuse.
- c. Close fuse cover. Make sure the fuse is fully covered by the lid.
Specifications
- Bulb Quantity: 50 pcs
- Bulb Spacing: 7 7/8” (20 cm)
- Lead Length: 0.67ft
- Lighted Length: 32.63ft
- Total Length: 33.3ft
- Input Voltage: 120VAC 60Hz
One-year Limited Warranty
We warrant this product to be free from defects in material and workmanship for a period of one year from the date of purchase. Warranty will be void if damage is due to misuse or improper installa-tion. Please contact us if you have any questions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>