Ozito PXBP-250 18v Lithium Ion Battery Instruction Manual
- June 7, 2024
- ozito
Table of Contents
PXBP-250 18v Lithium Ion Battery
2.5Ah BATTERY
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Battery Capacity: 2.5Ah Li-ion
Power Consumption: 45Wh
Weight: 0.46kg
ozito.com.au
1. Battery Release Button
2. Charge Indicator Button
3. Battery
PXBP-250
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of with household
waste but in an environmentally friendly way. Please recycle where facilities
exist. Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse of
recycled material decreases pollution in the environment. Please recycle
packaging where facilities exist. Check with your local council authority for
recycling advice.
BATTERY & CHARGER SAFETY WARNINGS
Before using the charger or battery read all instructions and cautionary
markings on the charger, battery pack and the product using the battery pack.
Do not lose these safety instructions.
Battery Warnings
-
The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the charging notes and procedures.
-
For optimum battery performance avoid low discharge cycles. Charge the battery pack frequently.
-
Use and store the battery pack in dry conditions with low humidity between 0-50°C, ideally at 15°C. Avoid exposing battery pack and charger to direct sunlight.
-
Do not keep battery pack in places where temperatures are liable to reach over 50°C, such as in a car, metal shed or similar that is in direct sunlight.
-
Do not ignite the battery pack or expose it to fire. There is a risk of explosion!
-
Do not exhaustively discharge batteries. Exhaustive discharge will damage the battery cells. The most common cause of exhaustive discharge is long-term storage and continued use of low-charge batteries. Always store the battery with some charge. Charge the batteries every 2-3 months to restore charge. Stop working as soon as the performance of the battery falls noticeably or the electronic protection system triggers.
-
Protect batteries and the tool from overloads. Overloads will quickly result in overheating and cell damage inside the battery housing without this overheating being apparent externally.
-
Avoid damage and shocks. Do not use batteries which have been dropped from a height of more than one meter or strong external impact, even if the housing of the battery pack appears to be undamaged. The battery cells inside the battery may have suffered serious damage.
-
If the battery pack suffers overloading and overheating, the integrated protective cut-off will switch off the equipment. Do not press the ON/OFF switch on the tool if the protective cut-off has actuated. This may damage the battery pack. Allow the battery to cool to room temperature before use.
-
Use only original battery packs. The use of other batteries may result in injuries, explosion and a fire risk.
-
Protect your rechargeable battery against moisture, rain and high humidity. Moisture, rain and high humidity can cause dangerous cell damage. Never charge or use batteries which have been exposed to moisture, rain or high humidity.
-
Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack is damaged, do not use the battery.
-
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
-
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If accidental contact occurs, flush with water and seek medical help immediately. Liquid ejected from the battery may cause irritation or burns.
-
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
-
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
-
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer.
-
Do not disassemble Battery. This may result in a risk of electric shock, electrocution or fire.
Charger Warnings -
Please check the data marked on the rating plate of the battery charger. Ensure to only connect the battery charger to a power supply with the voltage marked on the rating plate.
-
Protect the battery charger and its cable from damage and sharp edges. Have damaged cables repaired by an
authorized service agent before use. -
Keep the battery charger, batteries and the cordless tool out of children’s reach.
-
Do not use damaged battery chargers.
-
Do not use the supplied battery charger to charge other cordless tools. Only charge Ozito Power X Change
rechargeable batteries with an Ozito Power X Change Charger. -
The battery pack may become warm during use. Allow the battery pack to cool to room temperature before
commencing with the charging. -
Do not over-charge batteries. Do not exceed the maximum charging times. These charging times only apply to discharged batteries. Frequent insertion of a charged or partly charged battery pack will result in over-charging and cell damage. Do not leave fully charged batteries in the charger.
-
Charge the battery pack in dry conditions with low humidity between 10-40°C. Avoid exposing battery pack and charger to direct sunlight.
-
Do not use batteries which have suffered deformation during the charging process or shows any other signs of abnormalities including, excessive curvature of the housing, gassing, hissing or cracking.
-
Never fully discharge the battery pack. A complete discharge of the battery pack will lead to premature ageing of the battery cells.
-
Never charge the batteries unsupervised.
-
Do not cover or place any object on top of the charger, place the charger away from heat sources.
-
To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger.
-
Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
-
An extension cord should not be used unless necessary. Use of an improper extension cord could result in the risk of fire, electric shock or electrocution.
-
Do not disassemble charger. This may result in a risk of electric shock, electrocution or fire.
-
To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack will not reduce this risk.
-
Do not use the cordless tool or the battery charger near vapours and inflammable liquids.
ELECTRICAL SAFETY
WARNING! When using mains-powered tools, basic safety precautions, including
the following, should always be followed to reduce risk of fire, electric
shock, personal injury and material damage. Read the whole manual carefully
and make sure you know how to switch the tool off in an emergency, before
operating the tool. Save these instructions and other documents supplied with
this tool for future reference.
Note: The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified persons in order
to avoid hazard. Note: Double insulation does not take the place of normal
safety precautions when operating this tool. The insulation system is for
added protection against injury resulting from a possible electrical
insulation failure within the tool. Using an Extension Lead Always use an
approved extension lead suitable for the power input of this tool. Before use,
inspect the extension lead for signs of damage, wear and ageing. Replace the
extension lead if damaged or defective. When using an extension lead on a
reel, always unwind the lead completely. Use of an extension lead not suitable
for the power input of the tool or which is damaged or defective may result in
a risk of fire and electric shock. To reduce the risk of electric shock, we
recommend the use of a residual current device (rated 30mA or less).
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
1. OPERATION
Only use the battery pack with Ozito Power X Change 18V cordless products.
CHARGING YOUR LITHIUM ION BATTERY
This battery has been shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use
with a compatible tool) for the battery to reach its optimum performance /
runtime. This battery is compatible with chargers from the 18V Ozito Power X
Change range available through your local Bunnings Warehouse. Product
availability may differ.
- Insert the power plug of the charger into the mains socket outlet. The green LED will begin to flash when properly connected to power supply.
- Insert the battery pack into the battery charger.
- Remove battery from the charger once fully charged. Disconnect the charger from
the power supply.
Note: The battery pack can become a little warm during the charging. This is normal. If the battery pack fails to charge, check: if there is voltage at the socket outlet that the battery and charger are properly connected. If the battery pack still fails to charge, please contact our customer service center.
BATTERY CHARGE INDICATOR
The purchased battery is equipped with a battery charge indicator to show the state of the battery charge. Press the charge indicator button and look to see which LED lights.
Battery requires immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of
charge.
BATTERY PROTECTION SYSTEM
The tool is equipped with a battery protection system, which helps to ensure longevity of the battery. The output power automatically cuts off during operation when the tool and/or battery are placed under the following situations:
- When the tool is overloaded: If this occurs, release the trigger switch and remove causes of overload, then pull the switch trigger again to restart.
- When the remaining battery capacity becomes low: Recharge the battery pack.
Note: The battery protection system does not in any way damage the tool.
Note: The indicated capacity may be lower than the actual level during
use or immediately after using the tool.
WARRANTY
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER
ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law. Our goods come with guarantees
that cannot be excluded at law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure does not amount
to a major failure. Generally you will be responsible for all costs associated
with a claim under this warranty, however, where you have suffered any
additional direct loss as a result of a defective product you may be able to
claim such expenses by contacting our customer service helpline above.
36 MONTH REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is
defective it will be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
- If the tool has been operated on a supply voltage other than that specified on the tool.
- If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
- Failure to perform maintenance as set out within the instruction manual. · If the tool is disassembled or tampered with in any way.
ONLINE MANUAL
Scan this QR Code with your mobile device to take you to the online manual.
OZITO Australia/New Zealand (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
COMPACT FAST CHARGER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 200-250V ~AC 50-60Hz, 72W
Output: 20V DC, 3A
Battery Charge Time: 30Min – PXBP-150 (18V 1.5Ah) 40Min – PXBP-200 (18V 2.0Ah)
50Min – PXBP-250 (18V 2.5Ah) 60Min – PXBP-300 (18V 3.0Ah) 75Min – PXBP-400
(18V 4.0Ah) 120Min – PXBP-520 (18V 5.2Ah) 100Min – PXUBP-520 (18V 5.2Ah Ultra)
1. Charging Unit
2. Charging Unit LED
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of with household
waste but in an environmentally friendly way. Please recycle where facilities
exist. Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse of
recycled material decreases pollution in the environment. Please recycle
packaging where facilities exist. Check with your local council authority for
recycling advice.
BATTERY & CHARGER SAFETY WARNINGS
Before using the charger or battery read all instructions and cautionary
markings on the charger, battery pack and the product using the battery pack.
Do not lose these safety instructions.
Battery Warnings
-
The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the charging notes and procedures.
-
For optimum battery performance avoid low discharge cycles. Charge the battery pack frequently.
-
Use and store the battery pack in dry conditions with low humidity between 0-50°C, ideally at 15°C. Avoid exposing battery pack and charger to direct sunlight.
-
Do not keep battery pack in places where temperatures are liable to reach over 50°C, such as in a car, metal shed or similar that is in direct sunlight.
-
Do not ignite the battery pack or expose it to fire. There is a risk of explosion!
-
Do not exhaustively discharge batteries. Exhaustive discharge will damage the battery cells. The most common cause of exhaustive discharge is long-term storage and continued use of low-charge batteries. Always store the battery with some charge. Charge the batteries every 2-3 months to restore charge. Stop working as soon as the performance of the battery falls noticeably or the electronic protection system triggers.
-
Protect batteries and the tool from overloads. Overloads will quickly result in overheating and cell damage inside the battery housing without this overheating being apparent externally.
-
Avoid damage and shocks. Do not use batteries which have been dropped from a height of more than one meter or strong external impact, even if the housing of the battery pack appears to be undamaged. The battery cells inside the battery may have suffered serious damage.
-
If the battery pack suffers overloading and overheating, the integrated protective cut-off will switch off the equipment. Do not press the ON/OFF switch on the tool if the protective cut-off has actuated. This may damage the battery pack. Allow the battery to cool to room temperature before use.
-
Use only original battery packs. The use of other batteries may result in injuries, explosion and a fire risk.
-
Protect your rechargeable battery against moisture, rain and high humidity. Moisture, rain and high humidity can cause dangerous cell damage. Never charge or use batteries which have been exposed to moisture, rain or high humidity.
-
Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack is damaged, do not use the battery.
-
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
-
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If accidental contact occurs, flush with water and seek medical help immediately. Liquid ejected from the battery may cause irritation or burns.
-
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
-
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
-
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer.
-
Do not disassemble Battery. This may result in a risk of electric shock, electrocution or fire.
Charger Warnings -
Please check the data marked on the rating plate of the battery charger. Ensure to only connect the battery charger to a power supply with the voltage marked on the rating plate.
-
Protect the battery charger and its cable from damage and sharp edges. Have damaged cables repaired by an
authorized service agent before use. -
Keep the battery charger, batteries and the cordless tool out of children’s reach.
-
Do not use damaged battery chargers.
-
Do not use the supplied battery charger to charge other cordless tools. Only charge Ozito Power X Change rechargeable batteries with an Ozito Power X Change Charger.
-
The battery pack may become warm during use. Allow the battery pack to cool to room temperature before commencing with the charging.
-
Do not over-charge batteries. Do not exceed the maximum charging times. These charging times only apply to discharged batteries. Frequent insertion of a charged or partly charged battery pack will result in over-charging and cell damage. Do not leave fully charged batteries in the charger.
-
Charge the battery pack in dry conditions with low humidity between 10-40°C. Avoid exposing battery pack and charger to direct sunlight.
-
Do not use batteries which have suffered deformation during the charging process or shows any other signs of abnormalities including, excessive curvature of the housing, gassing, hissing or cracking.
-
Never fully discharge the battery pack. A complete discharge of the battery pack will lead to premature ageing of the battery cells.
-
Never charge the batteries unsupervised.
-
Do not cover or place any object on top of the charger, place the charger away from heat sources.
-
To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger.
-
Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
-
An extension cord should not be used unless necessary. Use of an improper extension cord could result in the risk of fire, electric shock or electrocution.
-
Do not disassemble charger. This may result in a risk of electric shock, electrocution or fire.
-
To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack will not reduce this risk.
-
Do not use the cordless tool or the battery charger near vapours and inflammable liquids.
ELECTRICAL SAFETY
WARNING! When using mains-powered tools, basic safety precautions,
including the following, should always be followed to reduce risk of fire,
electric shock, personal injury and material damage. Read the whole manual
carefully and make sure you know how to switch the tool off in an emergency,
before operating the tool. Save these instructions and other documents
supplied with this tool for future reference.
Note: The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand. This tools charger is double insulated therefore no
earth wire is required. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified persons in order to
avoid hazard. Note: Double insulation does not take the place of normal safety
precautions when operating this tool. The insulation system is for added
protection against injury resulting from a possible electrical insulation
failure within the tool. Using an extension lead Always use an approved
extension lead suitable for the power input of this tool. Before use, inspect
the extension lead for signs of damage, wear and ageing. Replace the extension
lead if damaged or defective. When using an extension lead on a reel, always
unwind the lead completely. Use of an extension lead not suitable for the
power input of the tool or which is damaged or defective may result in a risk
of fire and electric shock. To reduce the risk of electric shock, we recommend
the use of a residual current device (rated 30mA or less).
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
1. CHARGING A BATTERY
WARNING! THE CHARGER SHOULD BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED
AT 30MA OR LESS).
1. Connect the charger to the power supply and the LED will flash green
showing power is being supplied to the charger.
2. Align and then slide the ribs on the battery into the recess in the charger.
3. The red LED will illuminate while
4. The green LED will illuminate once the battery is charged.
Charger LED Indicator Lights
LED Indicator
|
Situation
GREEN (Flashing)
|
Stand By (no battery pack is inserted)
RED (Flashing)
|
Battery is charging (low charge)
RED (Illuminated)
|
Battery is fast charging (mid charge)
GREEN (Illuminated)
|
Battery is 85% – 100% charged and is ready for use.
BOTH(Illuminated)
|
Battery pack is too hot or too cold (charging will begin automatically when battery reaches correct charging temperature).
BOTH (Flashing)
|
The battery is defective, charging is no longer possible. Do not charge. Contact Ozito Customer Service.
Mounting The Charging Unit On A Wall
The charging unit can be mounted to a wall or workbench. The correct
dimensions for drill holes can be found on the back of the charging unit; a
template for the mounting hole locations can also be found on the Ozito
website.
Note: When mounting on a wall you must use suitable screws, e.g.M3 pan-head
screws, in order to prevent damage to the housing and risk of falling.
ONLINE MANUAL
Scan this QR Code with your mobile device to take you to the online manual.
2. MAINTENANCE
- Disconnect the charger from power source before cleaning.
- Keep the charger in a dry place out of reach of children.
- If the enclosure of the charger requires cleaning, do not use solvents. Use a dry, soft cloth only to wipe down the surface. Never let any liquid get inside the charger; never immerse any part of the charger.
- There are no other parts inside the charger which require maintenance. Do not take the charger apart. If the charger is damaged, contact your supplier or the manufacturer.
WARRANTY
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER
ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law. Our goods come with guarantees
that cannot be excluded at law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure does not amount
to a major failure. Generally you will be responsible for all costs associated
with a claim under this warranty, however, where you have suffered any
additional direct loss as a result of a defective product you may be able to
claim such expenses by contacting our customer service helpline above.
36 MONTH REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is
defective it will be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
- If the tool has been operated on a supply voltage other than that specified on the tool.
- If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
- Failure to perform maintenance as set out within the instruction manual.
- If the tool is disassembled or tampered with in any way.
OZITO Australia/New Zealand (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
PXCG-030C
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>