AOME S350 DLP Android Smart Mini Projector User Guide
- June 6, 2024
- AOME
Table of Contents
AOME S350 DLP Android Smart Mini Projector
LOCATION OF PARTS AND CONTROLS
- Lens
- Speaker
- Return
- Confirm/Play/Pause
- Right / FF / Volume+
- Left / REW / Volume-
- Volume Switch
- Power indicator
- Audio output(3.5mm)
- USB input/Power out
- HDMI input
- DC input (5V/2.4A)
LOCATION OF PARTS AND CONTROLS
- Power
- Speaker
- Air inlet
- Tripod dock
- Rating Label
- Non-slip mat
- Focus wheel
- Speaker
CHARGING
Fully charge the battery before first use(approx. 3 hours) Connect the Adapter to the projector for charging. the power indicator will show the remaining capacity of the battery, Each light represents 25% charge, 1 light indicates low charge, and 4 lights indicate full charge.
POWER BUTTON
Press the switch button 3 seconds both for turn on and turn off. Short press the button to show the remaining capacity of the battery.
FOCUS ADJUSTMENT
Simply roll the focus wheel control up and down to adjust the clarity of the
projected image.
VOLUME ADJUSTMENT
When play the video, touch the ‘ ’ button, then the screen will display the
volume bar. now you can adjust the volume by the button and .
POWER OUT
Connect the charging cable of your device to the projector’s USB port, and
then short press the switch button, now the projector turned into a power
bank,it can charge your mobile devices, and the output is 5V/1A.
AUDIO OUT
The projector built in 1 speaker for normal use, but it can output the audio
also, Plug the earphone or line-in cable of speaker to the projector’s 3.5mm
AUDIO OUT port as below image.
WARNING!
THIS PRODUCT CONTAINS A RECHARGEABLE BATTERY.
- Do not store this product in high temperatures, damp areas,or in direct sunlight.
- Never disassemble the product.
- Never dispose of the product in fire or water, which may result in an explosion and/or injury.
- Keep product out of reach of children.
- Do not touch the product with damp hands.
- Dispose of the product properly.
- The product must not be discarded with ordinary household waste.
- Contact your local recycling center for proper disposal.
DANGER!
TO REDUCE THE RISK OF ELECTRIC SHOCK, BURNS, FIRE OR INJURY:
- Do not use while bathing or in a shower.
- Do not place or store unit where it can fall or be pulled into a tub or sink.
- Do not place in, drop or submerge in water or other liquid.
- Do not reach for unit that has fallen into water. Unplug it immediately.
- Care should be taken so that objects do not fall and liquids aren’t spilled onto the unit.
HDMI INPUT
The projector can be connected to a variety of HDMI-compatible devices via a wired connection, such as laptops, smartphones, tablets, PSPs, etc. Please note the HDMI signal takes precedence over the USB drive inputs.
NOTE: Some devices may require an adapter to connect to your device. To determine what type of adapter you need to use, please reference the compatibility section of this manual. (For example, iPhone or iPad need a Lighting to HDMI AV adapter as below.)
The products don’t include any HDMI adapter
use DRIVE & MICRO SD CARD INPUT
Plug the USB drive or Micro SD card to the correct slot, then the projector
can read the video or photo files directly by the below steps.
VIDEO CONTROLS
Before control, activate the control panel by touching the confirm button.
- Pause: tap the confirm button.
- Fast forward: touch the > button. Each will increase the speed by x2, x4, x8,x16.
- Rewind: touch the < button. Each will increase the speed by x2,x4,x8,x16.
- Exit: tap the button to return to the video file list. Tap this button again to return to the main menu.
VOLUME CONTROL:
tap the button. Then use the > and < buttons to increase or decrease the
volume.
PHOTO CONTROLS
When playing a photo file, the projector will automatically enter the
SlideShow mode. While in this mode, each photo in the file list will
automatically play in order. Before control, activate the control panel by
touching the confirm button.
- Pause SlideShow: touch the confirm button.
- Resume SlideShow: touch the confirm button.
- Play next image: touch the > button.
- Play previous image: tap the < button.
WIRELESS CONNECTIVITY
The projector support wireless connection with some smartphones and tablets,
including i.O.S, Android and Windows 10 devices. 1, Connect the projector to
the wifi router.
STEP1
(Pic1) Connect the Wi-Fi of your device to the hotspot of the projector.
Projector name: PRO- Password: 12345678
STEP2
(Pic2) Open the browser of your device and log on the URL for
settings. The URL address is 192.168.49.1
After connection to the wifi router, the URL will be changed, Please check the
new one displayed in the interface of the projector,and log on new URL for
more setting or upgrade.
NOTE: Upgrade the software in the setting of URL, please see Pic3.
Android Device
- Turn on them racist, some devices named ‘smart view’, ‘screen sharing’, multi screen’ or others.
- Check the devices list and choose the projector, which is named PRO-XXXXXX.
i.O.S Device
- Be sure your device is connected to the hotspot of the projector or your device and projector are connected to the same Wi-Fi router.
- Tap the screen sharing and choose the projector, which is named PRO-XXXXXX.
NOTE : Normally, You need to upgrade the software of the projector if ios upgraded. Win10 device
Be sure your Win10 device supports a wireless connection. Open the operation center in the right corner and choose project.
then you can find ‘Connect to wireless display, tap it, the Win10 device will search the display devices automatically, then projector will show in the device list,please connect to the projector(named PRO-XXXXXX).
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
IC Note
This device complies with Industry Canada’s license-exempt RSS. Operation is
subject to the following two conditions:
- (This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>