dewenwils HLFL02A LED Floor Lamp Instruction Manual

dewenwils HLFL02A LED Floor Lamp

Thank you for your purchase.
Please contact us if you have any questions,
and we will get back to you within 24 hours.
Email: support@dewenwils.com
Please attach your Order ID so that we can serve you better.

Packing List

Part

A

| Description

Column Floor Lamp

| Quantity

1

---|---|---
B

C

| Base

Screw

| 1

2

D| Screwdriver| 1
E

F

| Adaoter Connector Adapter| 1

1

G| Remote Control| 1
H| AAA Battery| 2
I| Instruction Manual| 1

CAUTION

1. Before assembly, place all parts out on a clean flat surface and inspect each part for defects that may have occurred during shipping.
2. Inspect wire insulation for any cuts, abrasions or exposed copper that may have resulted during shipping. If there are any defects in the wire, DO NOT continue assembly. Please send an email to our Customer Service immediately ( support@dewenwils.com ).
3. Consult a qualified electrician if you have any electrical questions.
4. Never drape clothes over the lamp.
5. To reduce the likelihood of tipping over, we recommend placing the lamp behind furniture and keep children and pets away.
6. To prevent children from suffocating and choking, keep them away from packing materials.

ASSEMBLY INSTRUCTIONS

Before assembly, compared the accessories with the packing listing to make sure all parts are present; install the adapter first to check if product functions as intended.

1. Align the screw holes of the base (B) with the screw holes at the bottom of the Column Floor Lamp (A) and fix them with screws (C) .
2. Connect the Adapter connector (E) to the Adapter (F) .
3. Place the floor lamp where you need it and plug into the power supply.

Functions

1. Signal Receiver
2. On/Off Foot Switch
3. On/Off Switch
4. 16 Colors
5. Dimmer
6. Color Mode
7. Signal Transmitter

NOTE:

• Make sure the Remote Control within line of sight when use any function, it only transmits straightforward IR signal to Signal Receiver ( 1 ) .
• The remote control works within 26ft without obstacles, and the IR signal cannot pierce through glasses or walls.

Specifications

• Product Height: 48 IN.
• Base Diameter: 6.9 IN.
• Materials: Plastic & Metal
• Input Voltage: 120VAC 60Hz
• Voltage of remote: DC 3V (2 x 1.5V AAA Battery)
• Operating Range: 26FT

One-year Limited Warranty

Dewenwils guarantees this product to be free from defects in material and workmanship for a period of one year from the date of purchase. Warranty will be void if damage is due to misuse or improper installation. Please contact us if you have any questions.
Email: support@dewenwils.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>