DEWENWILS HRLS11B Remote Control Light Bulb Socket User Manual
- October 30, 2023
- dewenwils
Table of Contents
DEWENWILS HRLS11B Remote Control Light Bulb Socket
Specifications
- Brand: DEWENWILS
- Material: Polybutylene Terephthalate (PBT)
- Color: 1 Wall Switch + 1 Socket
- Base Type: Medium
- Mounting Type: Wall Mount
- Package Dimensions: 88 x 3.07 x 2.91 inches; 5.93 Ounces
- Item Model Number: HRLS11B
- Batteries: 1 12V battery is required. (included)
Description
Get rid of the pull-string switch that kept breaking or becoming stuck, and put the remote light switch next to the door or at your bedside instead. This will make it simple for you to turn on and off the lights without having to search in the dark for the switch, which is ideal for the elderly, kids, and those with restricted mobility. The detachable switch is simple to place and screw into the light socket, making it practical to operate pull chain lights, ceiling lights, and floor lamps manually or remotely. Ideal for your closet, basement, attic, pantry, and laundry room, you may add a new switch, repair an old broken one or move a hard-to-reach switch buried behind furniture. With no wire needed, there is no need to hire an electrician or tear down walls to install sophisticated wiring.
The wireless light switch and receiver kit of the same model can be freely programmed, enabling the activation of multiple devices with a single switch or the control of a single device with multiple switches, allowing you to control all of your lights from anywhere at any time. Its small size won’t compromise the lighting design and is more durable than remote-control bulbs. The strong RF signal can travel up to 80 feet in open space, allowing you to control basement, porch, stair, and garage lights from your bed or couch without having to stumble across a pitch-black room. This wireless remote light switch is also capable of operating through walls and doors without being affected by other appliances. Not applicable are motion detection lights, dimmer switches, or enclosed narrow lighting fixtures.
Features
-
Adds 2.28” Height Or Length The wireless light socket will increase the lamp’s height or length by 2.28″. Before using, please measure your light fixture.
-
Remote Light Switch Kit
Push a wall switch to remotely turn on or off ceiling lights, plug-in pendants, standing floor lamps, tabletop lamps, and difficult-to-reach lighting. -
Make Your Life Comfortable
Make your life convenient, safe, and energy-efficient. Ideal for the elderly, pregnant women, people with limited mobility, or anyone who suffers from back discomfort. -
Convenient For Use Everywhere
replaces the previous overhead pull cord switch, allowing you to simply turn off the lights at night without getting out of bed.
Usage Instructions
How To Power On/Off
- Make sure the light bulb is installed correctly and that the DEWENWILS HRLS11B Light Bulb Socket is tightly fastened to the light fixture.
- Find the power switch on the actual socket. It typically sits close to the socket’s base or side. To turn on the socket, flip the power switch to the “ON” position. The connected lightbulb will receive electricity as a result of this.
- There is a remote control included with the DEWENWILS HRLS11B. To switch on the light, aim the remote control at the outlet and hit the “ON” button. To turn the light out, use the “OFF” button.
How To Install
- To install the socket, first, make sure the power switch is off. Make sure the socket is appropriate for the type of bulb you want to use (such as an E26 or E27).
- The light bulb socket should be inserted into the light fixture and tightened by turning it clockwise. Make sure the connection is secure, but don’t overtighten.
- The socket should be filled with the selected light bulb. Ensure that it is firmly inserted and fastened.
- There is a remote control included with the DEWENWILS HRLS11B. Insert the batteries (typically AAA batteries) into the remote control’s back battery compartment. Ensure that the batteries are properly placed and that the container is shut tightly.
- Press the buttons on the remote control to test it after flipping on the power switch. The light bulb socket ought to be successfully controlled.
How To Replace Batteries
- A battery compartment cover is located on the rear of the remote control.
- To access the battery compartment, slide or lift the cover. There can be a latch or a little screw that needs to be removed on some models.
- From the compartment, remove the old batteries. For the successful installation of the new batteries, take note of the battery’s positive and negative terminals’ right orientation.
- Make that the new batteries are positioned correctly with respect to the positive and negative terminals before inserting them into the compartment.
- Make sure the battery compartment cover snaps shut or that the screw is secured firmly before closing it.
Frequently Asked Questions
What is the DEWENWILS HRLS11B Remote Control Light Bulb Socket made of?
The DEWENWILS HRLS11B Remote Control Light Bulb Socket is made of Polybutylene Terephthalate (PBT).
What type of light bulbs can I use with the DEWENWILS HRLS11B Remote Control Light Bulb Socket?
The DEWENWILS HRLS11B Remote Control Light Bulb Socket is compatible with medium base type light bulbs.
Can I use the DEWENWILS HRLS11B Remote Control Light Bulb Socket with motion detection lights?
No, the DEWENWILS HRLS11B Remote Control Light Bulb Socket is not applicable for use with motion detection lights.
How far can the DEWENWILS HRLS11B Remote Control Light Bulb Socket's signal travel?
The DEWENWILS HRLS11B Remote Control Light Bulb Socket's signal can travel up to 80 feet in open space.
Is it difficult to install the DEWENWILS HRLS11B Remote Control Light Bulb Socket?
No, it is very easy to install the DEWENWILS HRLS11B Remote Control Light Bulb Socket. No wiring is required, and it can be easily screwed into the light socket.
Can I control multiple devices with a single switch using the DEWENWILS HRLS11B Remote Control Light Bulb Socket?
Yes, the wireless light switch and receiver kit of the same model can be freely programmed, enabling the activation of multiple devices with a single switch or the control of a single device with multiple switches.
Can I use the DEWENWILS HRLS11B Remote Control Light Bulb Socket with enclosed narrow lighting fixtures?
No, the DEWENWILS HRLS11B Remote Control Light Bulb Socket is not applicable for use with enclosed narrow lighting fixtures.
How do I replace the batteries in the remote control?
To replace the batteries in the remote control, slide or lift the battery compartment cover on the back of the remote control. Remove the old batteries and insert the new ones, making sure they are positioned correctly. Close the battery compartment cover securely.
What is the DEWENWILS HRLS11B Remote Control Light Bulb Socket?
The DEWENWILS HRLS11B is a socket adapter that allows you to remotely control a light bulb using the included remote control.
How does the remote-control work?
The remote control uses RF (Radio Frequency) signals to communicate with the socket adapter. It allows you to turn the light bulb on/off and control other functions.
What type of light bulbs are compatible with the DEWENWILS HRLS11B?
The DEWENWILS HRLS11B is compatible with most E26/E27 base light bulbs, including incandescent, LED, CFL, and halogen bulbs.
Can I use multiple DEWENWILS HRLS11B sockets with one remote control?
Yes, you can pair multiple sockets with one remote control. Follow the instructions in the user manual to pair additional sockets.
How far can the remote-control reach?
The remote control has a typical range of up to 100 feet (30 meters) in an open area. However, the actual range may vary depending on the environment and obstructions.
Does the DEWENWILS HRLS11B have a dimming function?
No, the DEWENWILS HRLS11B Remote Control Light Bulb Socket does not have a built-in dimming function. It supports on/off control only.
How do I install the DEWENWILS HRLS11B socket?
Screw the socket into a standard light fixture and insert a compatible light bulb. Ensure the power switch is turned off during installation.