SATCO 62-1141R1 LED Decorative Wall Sconce Instruction Manual
- June 13, 2024
- SATCO
Table of Contents
**SATCO 62-1141R1 LED Decorative Wall Sconce Instruction Manual
**
SAFETY INSTRUCTIONS
WARNING: To reduce the risk of electrical shock, fire, or injury to persons; read and follow all warnings and installation instructions before installing. All installation should be performed by a qualified electrician.
RISK OF ELECTRIC SHOCK: Prior to inspection and installation turn power off via circuit breaker panel. Only to be performed by certified personnel conformed to local electrical and codes.
RISK OF FIRE: This fixture is rated for 100-277 VAC at 60Hz only installation must be performed to the following instructions containing in this manual.
FOR YOUR SAFETY: While performing installations described, gloves, safety glasses or goggles should be worn.
Do not make or alter any open holes in an enclosure of wiring or electrical components during installation.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
Do not alter, relocate, or remove wiring, lampholders, power supply, or any other electrical component.
SUITABLE FOR WET LOCATIONS.
IN THE BOX
INSTALLATION
STEP 1. Take out led lamp and make sure it is intact.
STEP 2. Attach the Base Plate to the junction box with the M4 screws.
STEP 3. Connect the LED fixture to 100-277 VAC 60Hz in accordance to local codes, support fixture while making connections.
STEP 4. Align mounting holes of lamp body to base plate and secure with provided fasteners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>