dewenwils HODT12C Outdoor Digital Countdown Timer Instruction Manual
- June 13, 2024
- dewenwils
Table of Contents
dewenwils HODT12C Outdoor Digital Countdown Timer
Product Information
The Outdoor Digital Countdown Timer is a versatile device designed to help you control and automate the timing of electrical devices in outdoor settings. It is equipped with a variety of features and specifications, making it suitable for various applications.
- SKU: HODT12C
- Input Voltage: 125VAC
- Frequency: 60Hz
- Cord: SJTW 14/3C
- Max Power Rating: 15A Resistive, 1000W Tungsten, 500VA Electronic Ballast, 120Vac 60Hz 8.3A Ballast, 1/2HP
Product Usage Instructions
Before operating the Outdoor Digital Countdown Timer, please read and follow these instructions carefully:
- Ensure that the input voltage matches the rated voltage of the device (125VAC).
- Connect the timer to a power source using the provided SJTW 14/3C cord.
- Set the desired countdown time using the timer’s controls. Refer to the user manual for detailed instructions on how to set the countdown time.
- Plug the electrical device you want to control into the timer’s outlet.
- Once everything is properly connected, turn on the timer by pressing the power button.
- The timer will start counting down according to the set time. The connected device will automatically turn off when the countdown reaches zero.
- If you want to cancel the countdown before it reaches zero, press the cancel button.
- To reset the timer and set a new countdown time, press the reset button.
Note: Please ensure that you do not exceed the maximum power rating of the timer to avoid any damage or safety hazards. The warranty does not cover damage caused by personal misuse or improper installation.
Warning: To reduce the risk of fire, electric shock or personal injury, please strictly follow the instructions.
- The timer must be mounted in a vertical position with the receptacles facing downward and at least 2ft above the ground level when in outdoor
- Do not connect any devices which may exceed the maximum ratings of this timer.
- Do not immerse in water.
- Children are not allowed to use the timer without supervision.
- Do not disassemble or repair the product, but only by authorized service personnel.
6 Please always unplug and store indoors when not in use..
-
Light Sensor
Sensor will turn timer on at dusk and off at dawn. -
Display
Indicates current operating mode -
Select Button
To select and switch the operating mode
Operating Instructions
Plug the timer into a standard outlet, and then press the button on the timer
to select one of the following settings:
SELECT DESCRIPTION
-
F. No Power
-
O. Power Constantly on
-
1 to 9: On at dusk. Set off time for 1-9 hours.
-
d. On automatically at dusk and off at dawn
-
1. to 9.: On immediately. Set off time for 1-9 hours.*
-
Cycle repeat every 24 hours * Once activates at dusk in the specific mode, the program cycle will be completed. Any light sources won’t interfere with the program cycle.
Specifications
- Input Voltage: 125VAC, 60Hz
- Cord : SJTW 14/3C
- Max Power Rating: 15A Resistive 1000W Tungsten 500VA Electronic Ballast 120Vac 60Hz 8.3A Ballast 1/2HP
Safety Information
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
One Year Limited Warranty
Supported by our professional R&D team and QC team, we provide One Year Warranty for materials and workmanship from the purchase date. Please note that the warranty does not cover damage caused by personal misuse or improper installation. Please attach your Order ID and Name so that our dedicated customer service team can help you better.