BEOK TS4 Series Wi-Fi Thermostats User Manual

BEOK TS4 Series Wi-Fi Thermostats

Product Information

The TS4 Series WiFi Touch Screen Thermostat is a versatile thermostat designed for controlling various heating systems. It comes in three models: WP for water heating, EP for electric heating, and WPB for gas boiler systems.

This thermostat is used for water heating, electric heating, or gas boiler.

Welcome
Thank you for your trust and support. By adopting higher~nd technology and more perfect technology. your new thennostat will provide you with the right temperature environment every day in the future, making your life more comfortable and your living environment more stylish and beautiful. For detailed instructions on the installation and use of this thermostat, please read this manualcarefully. Please contact a professional to install the thennostat for you and install and use the product to the extent pennitted by law.

Application

Intelligent digital temperature controller is a floor heating system suitable for room temperature control and household temperature control. It controls the operating stale of the floor healing equipment by comparing the ambient temperature with the set temperature, which improves comfort and achieves energy saving. This digital temperature controller adopts microcomputer control tsc:hnology and is equipped with full-screen display touch buttons, which Is elegant In design and easy to use. The thennostat has manual automatic, programmable and state memory functions.

Product packaging

• Thermostat host: 1 PC
• Certificate of conformity: 2PCS
• Sensing line (optlonal): 1PC

Product parameters

• Water heating 3A;
• Electric heating 16A
• Linkage; M:Gas boiler3A

Electrical Specifications

1. Temperature Sensor: NTC
2. Temperature accuracy: :1:1’C
3. Display screen: LCD
4. Self-consumplion power: <1W
5. Display range: 0-51”C
6. Voltaga:AC100-240V, 50/60Hz
7. Working environment: -5-50’C
8. Temperalure setting: 5 -60’C
9. Load current: water healer 3A
   • electric heater 16A
   • gas boiler heater 3A

User Instructions

1. Read this manual carefully. A general operation may damage the product or cause a danger w s situation.
2. The installation personnel must be well -trained and experienced service technicians.
3. After the insta llation is complete, please close this manual carefully and operate this prod u c t following the user guide. Note: There is a risk of elec1ric shock or equipment damage.

Wiring Diagram

Note: WP for water heating; EP for electric heating; WPB for gas boiler

Key Features

• WiFi-enabled thermostat for convenient control
• Touch screen interface for easy operation
• Advanced option settings for customization
• Compatible with different heating systems

Icon Description:

The thermostat features various icons that indicate different functions or settings. Refer to the user manual for a detailed description of each icon and its corresponding meaning.

Mounting steps

1. Connect 1ho power box according to the wiring diagram
2. Separate the power 1upply from the control board cable.
3. Scrow the power supply into the box of86
4. Connect tho power board lo the control board line, and align the buckle at 30 degrees to complete the installation.

Mounting Steps:

1. Select a suitable location for mounting the thermostat.
2. Ensure proper wiring and connections according to the specific heating system (water heating, electric heating, or gas boiler).
3. Securely attach the thermostat to the chosen location using screws or adhesive, following the provided guidelines.

Operation Guide

Refer to the user manual for detailed instructions on operating the thermostat. The touch screen interface allows you to adjust temperature settings, set schedules, and access advanced options.

1. Power on/off: press the key to turn on/off the thermostat.
2. Press the M key to switch between manual and automatic modes.
3. 1n the automatic mode, press the A key or key to adjust the temperature, and it will enter the automatic mode, which only runs for a while.
4. Press the key to enter the clock setting, press the mode key M to switch the setting options, and press the and keys to adjust each parameter value.
5. Simultaneously press and hold the A and V keys for 5 seconds to add or cancel the child lock.
6. WTFT link: When the thermostat is turned on, press and hold the A button for eight or five seconds, the WTFI icon flashes on the thermostat display, and the thermostat enters the code matching state.

Time programming instructions

Long press the M key to enter the programming setting, short press the M key to switch options, press the “‘ or v key to adjust the parameters of each option, and press the<!.> key to exit and save mode.

Advanced Option Setting

The thermostat provides advanced option settings for customization. These settings may include features like temperature calibration, display preferences, and system-specific configurations. Consult the user manual for step-by-step instructions on accessing and adjusting these options.In the shutdown state, press the M key and key. Press for 5 seconds to enter the advanced option setting Press the M key to enter thenext option, then press the and key to adjust options , and press the key to exit the advanced option setting mode.

01| Temperature compensation| The default value of the calibration room temperature is -2 degrees Celsius. Press

the A or V key to adjust the range from 9.9° C to -9.9° C.

---|---|---
02|

Sensor selection

| The temperature sensor-selection defaults to IN.  Press the    key or the key to adjust it respectively as IN internal sensor selection. ALL means all internal

sensors are selected; OUT means external sensors are set

03| Limit temperature value modification| The limit temperature value is 60°C by default. Press the or    key  to adjust the range from 35”C to 6Cf’C
04| Temperature difference setting| The default setting temperature difference start is l”C; press the or key to

adjust the rnnge from 0.5″C to l0″C.

05|

Ant ifreeze function

| Set the antifree:ze function sOFF by default; press the . key to tum on the antifreeze function.
06| Rest day selection

and closing week programming

| 5:Two -day weeke nd 6:Sin gle day off

7: N o re s t                               OFF : Turn off programmin g

07

|

Mainandauxili

reverse selection (optional)

| Set the default main and auxiliary reversal to 00 Press the A and v keys to adjust O to turn off the main and auxiliary reversal.

00 means auxili ary re verse , 01 means auxiliary reverse  ,

08

|

B ac klin ght brightness

| 0 0:Turn off the  backlight          01:M ic ro- li ght 02:Me d i um brightness             03 : H i gh lig ht
09|

Set temperature upper limit

| Set the upper limit of the temperature to 60°C; press the or  key to adjust the range from I 5°C to 95°C.

10

|

Reset

|

Set to restore factory settings The default display is ,” press the key to display”—,” and then press the enter key to restore the factory settings.

11| Sound|

NO:Turn on the sound              OFF:Turn off the sound

About WiFi Connection:

The WiFi functionality allows you to connect the thermostat to your home network, enabling remote control and access through a dedicated mobile app. Follow the instructions in the user manual to set up the WiFi connection properly.Before using the WIFI temperature controller for the first time, you must set the WIFI value number and configuration via your smartphone or tablet, which will allow communication between your connected devices.

• WIFI connection : When the thermostat is turned on, press and hold the up button for 5 seconds, the WIFI icon flashes on the thermostat display, and the thermostat enters the code matching state.
• WIFI conection: Bluetooth thermostat, please turn on the phone’s Bluetooth

APP download
Search for nTuya Smartn in each APP market or scan the following QR code to download this software:

Register an account
If you do not have an APP account, you can choose to register or log in via SMS verification code. Click “Create New Account” to enter the privacy policy page ofTuya Smart Platform. After clicking Agree, you will formally join the registration page of your mobile phone number.

The system automatically determines the current country/region, or you can manually select the country/region, enter your phone number or email address, and click nGet the Verification Code.” Enter the received verification code. Then enter the password. Click “Finish” to register successfully.

Add device

1. (Bluetooth connection) Tum on the mobile phone’s Bluetooth, turn the device on, and enter the Tuya APP. Click “Add Device” or”+” on the top right of the APP homepage, and enter the “Add Device” interface. It will prompt: find the device to be added (Figure 2) and follow the prompts.

2. “Automatic discovery”: Search for devices (Figure 3), and add widgets as prompted on the phone page

3. (WIFI connection) When the thermostat is turned on, press and hold the up button for 5 seconds, the thermostat displey will show
   Now the WIFI icon flashes (slow flashing), and the thermostat enters the status of code matching.
   Find the temperature control product (Bluetooth + WIFI model) in the (small household appliances). In the specified network configuration mode, cl ick the confirmation button on the page, select the WIFI that can connect to the Internet in the working area of the device, and enter it.
   WIFI password, click Next, click according to the page prompt (Figure 2), “Go to connect,” and follow the instructons to find the prompt content (Figure 3), click “Prompt content” and then return to the Tuya APP to enter the network configuration process. In that case, the APP for the network configuration process is shown in Figure 1, and the network configuration successfully displays the interface shown in Figure 2. The device’s name with successful ne twork configuration can be modified, and the room’s location can also be selected. If the network configuration fails, the APP will display the page as shown in the figure below, and you can choose to add it again or view the help.
   Note: Please confirm whether the thermostat enters the code matching state if the connection fails.

4. Thermostat APP interface display

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>