Furniture of America IDF-51043 Beversly Farmhouse-Rustic Black TV Stand Instruction Manual
- June 13, 2024
- Furniture of America
Table of Contents
Furniture of America IDF-51043 Beversly Farmhouse-Rustic Black TV Stand
TOOLS REQUIRED
Allen Wrench (Included)
2 – People Recommended
ASSEMBLY RATING
The Assembl rating is a 5-point system Rating 1s a system sh . level of effort owing the assemble needed to a specific product.
CHECK BEFORE STARTING
-
Are you missing anything?
Double-check all parts, hardware and accessories listed are all acccounted for. -
Check out our Quick Tips!
We recommend reviewing the pre-assembly handouts. Even experts need a refresher now and then! -
Should we send any replacements?
Are there any irregularities or flaws in the parts? We can send replacements! -
PrepTime!
Please review the assembly instructions and all diagrams prior to assembling.
PRE-ASSEMBLY INTRODUCTION
We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process.
Teamwork
ALWAYS have at least two people to help with transporting and assembling the
product to avoid potential injury and/or damage.
Suitable Location
Assembling near the area of the intended location is highly recommended.
Sufficient Space
Make sure you have enough space to move around during the assembly.
Avoid Scratches
Use cardboard, blankets or a carpeted area while assembling furniture to
prevent to prevent scratches and damages.
Flat Surface
Make sure the furniture rests on a flat and level surface with each leg evenly
touching the floor.
ASSEMBLY AND CARE ADVICE
FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE.
- Position each part correctly and insert screws or bolts into their respective holes.
- Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
- Turn clockwise to tighten and only tighten when step is completed or when instructed to do so.
- Save the instructions and store any supplied tools for later maintenance.
- After two weeks, check and tighten any loose hardware and repeat again every six months thereafter.
IT IS THE USER’S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY
LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO
SUPPORT ITS
INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE SERIOUS
INJURY.
TV STAND
- Please keep instructions for future reference.
- Check the quantity and irregularity of parts and hardware before you start.
PARTS
HARDWARE 
ASSEMBLY INSTRUCTIONS
- Use the supplied Allen Key{#C} to secure the Legs{#2) to the Stand{#l) using the Washer{#A) and Bolt{#B).
- Carefully flip over the assembled item.
- ASSEMBLY COMPLETED
- Please ensure the furniture rests on an even and flat surface. If the product wobbles or feels loose, double-check all bolts and/or screws are properly tightened and secured.
- Keep this handy! Please retain this instruction manual and any ordeMelated information for future reference.
- Lift, don’t drag! To avoid damage to product please always LIFT the product when transporting of adjusting the placement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>