V I V O MOUNT-MINI1 VESA Mount Designed for the Mac Mini Instruction Manual

June 13, 2024
V I V O

V I V O logo VESA Mount Designed for the Mac Mini
Instruction ManualV I V O MOUNT MINI1 VESA Mount Designed for the Mac
Mini

MOUNT-MINI1 VESA Mount Designed for the Mac Mini

SKU: MOUNT-MINI1

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-mini1

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

| |
---|---|---
help@vivo-us.com| www.vivo-us.com
Chat live with an agent!| 309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

V I V O MOUNT MINI1 VESA Mount Designed for the Mac Mini - PACKAGE
CONTENTS TOOLS NEEDEDV I V O MOUNT MINI1 VESA Mount Designed for the Mac Mini - TOOLS
NEEDED DO NOT EXCEED WEIGHT CAPACITY
Failure to do so may result in serious injury.

ASSEMBLY OPTIONS:

| |
---|---|---
Desk Clamp
pg. 3-4
Allows the Mac Mini Mount to clamp to a desktop surface with a thickness of 10mm to 50mm.| VESA Plate Monitor Arm
pg. 5-6
Mount installs between monitor and monitor mount arm.| VESA Plate
Freestanding Monitor
pg. 7
Utilizes VESA holes in freestanding monitor to hold Mac Mini Mount.

ASSEMBLY OPTION A: Desk Clamp
STEP 1
For Desktops with a 10mm to 40mm Thickness:
Dissemble Clamp (C) using a Phillips screwdriver. Turn Lower Clamp (C1) upside and reassemble Clamp (C) as shown below.V I V O MOUNT MINI1 VESA Mount
Designed for the Mac Mini - Clamp For Desktops with a 15mm to 50mm Thickness:
Proceed to Step 2.

STEP 2
Connect Mounting Plate (A) to back side of Clamp (C) at desired height using M4x6mm Screws (S-A) and a Phillips screwdriver. V I V O MOUNT MINI1 VESA
Mount Designed for the Mac Mini - screwdriverSTEP 3
Secure Locking Plate (B) to back side of Mounting Plate (A) using M5x6mm Screws (S-C), M5 Washer (S-E), and a Phillips screwdriver. V I V O MOUNT
MINI1 VESA Mount Designed for the Mac Mini - Phillips
screwdriverSTEP 4
Place assembly onto desktop and tighten hand bolt to secure. V I V O MOUNT
MINI1 VESA Mount Designed for the Mac Mini - hand bolt to
secureSTEP 5
Place Mac Mini into assembly and feed Velcro Strap (D) through loops on Mounting Plate (A) to secure, as shown below. V I V O MOUNT MINI1 VESA Mount
Designed for the Mac Mini - Mac MiniASSEMBLY OPTION B: VESA Plate – Monitor Arm

STEP 1
Secure Mounting Plate (A) to VESA holes on the back of the monitor using M4x12mm Screws (S-B) and a Phillips screwdriver. V I V O MOUNT MINI1 VESA
Mount Designed for the Mac Mini - VESA PlateSTEP 2
Attach Locking Plate (B) to the front side of the VESA Plate from your monitor mount using M4x12mm Screws (S-B), M4 Nuts (S-D) and a Phillips screwdriver. STEP 3
Secure Locking Plate (B) to Mounting Plate (A) using M5x6mm Screws (S-C), M5 Washers (S-E), and a Phillips screwdriver.V I V O MOUNT MINI1 VESA Mount
Designed for the Mac Mini - Secure Locking Plate STEP 4
Place Mac Mini into assembly and feed Velcro Strap (D) through loops on Mounting Plate (A) to secure, as shown below. V I V O MOUNT MINI1 VESA Mount
Designed for the Mac Mini - Velcro StrapSTEP 5
Secure VESA plate to monitor mount using manufacturer guidelines. V I V O
MOUNT MINI1 VESA Mount Designed for the Mac Mini - manufacturer
guidelinesASSEMBLY OPTION C: VESA Plate – Freestanding Monitor
STEP 1
Secure Mounting Plate (A) to VESA holes on the back of the monitor using M4x12mm Screws (S-B) and a Phillips screwdriver. V I V O MOUNT MINI1 VESA
Mount Designed for the Mac Mini - VESA holesSecure Locking Plate (B) to Mounting Plate (A) using M5x6mm Screws (S-C), M5 Washers (S-E), and a Phillips screwdriver. V I V O
MOUNT MINI1 VESA Mount Designed for the Mac Mini - Secure Locking Plate
2STEP 2
Place Mac Mini into assembly and feed Velcro Strap (D) through loops on Mounting Plate (A) to secure. V I V O MOUNT MINI1 VESA Mount Designed for
the Mac Mini - loops

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 06/30/2023
REV1.1V I V O MOUNT MINI1 VESA Mount Designed for the Mac Mini - Symbol
5Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT:
www.vivo-us.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

V I V O User Manuals

Related Manuals