Led2 TUBUS A LED Ceiling Lamp Instruction Manual
- June 13, 2024
- Led2
Table of Contents
Led2 TUBUS A LED Ceiling Lamp
Product Information
Product Name: TUBUS A/B/C
Manufacturer: Unknown
Model Numbers: 1, 2, 3a, 3b, 4, LL5, N N, 6c, click, a b, 7
Power Supply: 220-240 VAC, 50/60 Hz
Dimming Options: PUSH DIM, DALI/PUSH DIM, DALI DIM, TRIAC DIM
Certification: IP20
Website: www.led2.eu
Product Usage Instructions
1. Before installing the product, turn off the main power to prevent any
possible electric shock. 2. The installation should only be carried out by a
technician or a qualified person. 3. If the lamp has a lampshade or diffuser,
handle it with care as it is fragile. 4. If the product has an integrated LED
light source and requires replacement, only a technician or a qualified person
should perform the replacement. 5. The manufacturer does not take
responsibility for incorrect use and assembly of its products. 6. Depending on
the model number of the product, follow the corresponding dimming option: –
Model 1: PUSH DIM – Model 2: DALI/PUSH DIM – Model 3a: DALI DIM – Model 3b:
DALI DIM – Model 4: TRIAC DIM (Phase cut Triac dimmer) 7. For Model 4, choose
between
trailing edge or leading edge dimming depending on the dimmer type used. 8.
For specific warnings and instructions in other languages (DE, SK), please
refer to the manual provided on www.led2.eu.
This product contains a light source of energy efficiency class F
Power
Installation
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
**Symbols
** CONNECTION
CONNECTION – DIMMABLE VERSION – OPTIONAL
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>