LAMAX LXIHMDOTS2PBA Dots2 Play Touch Black Wireless Charging User Guide
- June 13, 2024
- LAMAX
Table of Contents
LAMAX LXIHMDOTS2PBA Dots2 Play Touch Black Wireless Charging User Guide
Controls
| Turn On | Hold down the multifunction button for 3 seconds |
|---|---|
| Turn Of | Hold down the multifunction button for 5 seconds |
| Play / Pause | Press the multifunction button |
| Volume up | Press the right multifunction button twice |
| Volume down | Press the left multifunction button twice |
| Next Track | Hold the right multifunction button 2 seconds |
| Previous Track | Hold the left multifunction button 2 seconds |
| Answer/End Call | Press the multifunction button |
| Reject Call | Hold the multifunction button for 1 second |
| Activate Mobile Assistant | Press the multifunction button 3 times |
Switching On
The earphones turn on automatically when removed from the charging station. To switch on manually, press and hold the multifunction button for 3 seconds. When switched on, there is an audible sound and the blue LED flashes.
Switching Off
The earphones turn off automatically when inserted into the charging station.
To turn off manually, hold the multifunction button for 3 seconds. When
switched off, an audible notification sounds and the red LED flashes. If the
headphones are out of the charging case, turned on and not connected to a
device, they will automatically turn off after 3 minutes.
Pairing
- Remove the earphones from the charging station. The earphones will automatically connect to each other and an audible notification will sound. The LED in the headphones will flash alternately blue and red.
- Turn on Bluetooth on your device and look for LAMAX Dots2 Play in the list of available Bluetooth devices. After successful pairing you will hear an audible notification.
If you have pairing problems, remove the headphones from the list of paired devices on your phone. Remove the headphones from the charging station and press the multifunction button on both headphones 5 times. The LED in the headphones flashes red 5 times. Then put them in the charging station and pair according to point 1.
Charging
To charge the charging station, connect the cable to the USB-C port on the
back and the end of the cable into a USB power supply with a maximum voltage
of 5V. When charging, the LEDS will light up gradually according to the charge
status. When fully charged, all 4 LEDs will be lit.
To charge the earphones, insert them into a charged charging station. The LED light in the headphones flashes twice and then turns red during charging. When fully charged, it goes out.
Parameters
| Wireless technology | Bluetooth 5.1 |
|---|---|
| Max. pairing distance | up to 10 metres |
| Supported codecs | AAC, SBC |
| Earphone battery capacity | 40 mAh |
| Charging station capacity | 400 mAh |
| Earphone charging time | 1,5 hours |
| Playback time | up to 7 hours |
| Weight of one earphone | 4 g |
| Weight with charging station | 36 g |
Subject to printing errors.
The latest version of the user guide can be downloaded here:https://lamax- electronics.com/dots2-play/manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>