Fusion PS-A302B Panel-Stereo Owner’s Manual
- June 13, 2024
- FUSION
Table of Contents
Fusion PS-A302B Panel-Stereo
Getting Started
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other important information.
FUSION® Panel-Stereo Controls
FUSION Panel-Stereo USB Port
| USB port for your mobile device connection or a low-profile USB flash
drive. Charges your mobile device.
---|---
| Weather cap. When properly closed, this cap provides a cover that is
water resistant to IPX5.
Connecting Devices
Connecting a Compatible Bluetooth Device to the Stereo
You can play media from a compatible Bluetooth device using the Bluetooth wireless connection.
You can control the music playback with the media app on a Bluetooth device or using the FUSION-Link™ remote control app. For information about the FUSION- Link app for compatible Apple or Android™ devices, go to the Apple App StoreSM or the Google Play™ store.
-
Enable Bluetooth on your compatible Bluetooth device.
-
Bring the compatible Bluetooth device within 10 m (33 ft.) of the stereo.
-
On the stereo, press and hold until you hear Discoverable and flashes blue. The stereo remains discoverable for two minutes.
-
On your compatible Bluetooth device, select Panel-Stereo from the list of discovered devices. turns solid blue when the device is connected to the stereo.
-
If your compatible Bluetooth device does not connect to the stereo, repeat the above steps.
NOTE: The FUSION-Link app works for any audio source, but you must select the Bluetooth source on the stereo to stream audio.Play music using your Bluetooth device. -
If you want to stream Bluetooth audio, select the Bluetooth source on the stereo.
NOTE: remains solid blue when a Bluetooth device is connected to the stereo, regardless of the selected source.
Immediately after the stereo is turned on, it connects automatically to the last connected device when it is within range and Bluetooth wireless technology is enabled. You can connect a previously paired Bluetooth device by selecting Panel-Stereo from the Bluetooth device’s list of previously paired devices.
Connecting a Compatible USB Device to the Stereo
You can connect a compatible USB flash drive, compatible Apple device, or compatible Android AOA device to the USB port to play music and charge compatible Apple or Android devices.
The FUSION-Link remote control app is required to navigate folders on the USB flash drive. When using a USB flash drive without the FUSION-Link app, the stereo plays music files saved in the root directory by default. If the FUSION-Link app has been previously used to navigate to a different folder on the USB drive, the stereo plays music files from the last folder navigated to.
When using a USB flash drive, the file load time varies based on size of the flash drive and the number of files on the flash drive.
- Connect the USB flash drive or the USB cable included with your media player to the USB port on the stereo.
- If you want to stream Bluetooth audio, select the Bluetooth source on the stereo.NOTE: The FUSION-Link app works for any audio source, but you must select the Bluetooth source on the stereo to stream audio.
- Play music using the connected USB device.
When an unsupported USB device is connected, the stereo beeps to indicate the error.
| One beep | Unsupported hub attached |
|---|---|
| Two beeps | Unsupported USB device attached |
| Three beeps | Device not responding |
| Four beeps | Unsupported USB device attached that exceeds the 1 A charging |
rating of the stereo
USB Flash Drive Size
The weather cap should be sealed on the device to avoid corrosion. To ensure the weather cap can be properly inserted and locked, you must use a low profile USB flash drive that is no longer than 22 mm (0.86 in.), measuring from end to end. The optional FUSION MS-USB16 accessory is a low-profile, 16 GB flash drive, and is the correct size to allow the weather cap to be closed and sealed.
- 22 mm (0.86 in.) maximum
FUSION-Link Remote Control App
You can use the FUSION-Link remote control app on your compatible Apple or Android device to adjust the stereo volume, change the source, control playback, select and manage radio presets, and adjust some stereo settings. The app communicates with the stereo using a wireless connection to the mobile device. You must connect your compatible device to the stereo using Bluetooth or Wi‑Fi® technology to use the app. For information about the FUSION-Link remote control app for compatible Apple or Android devices, go to the Apple App Store or the Google Play store.
Connecting a Garmin® Watch to the Stereo
For a list of a compatible Garmin watches, go to www.fusionentertainment.com.
For more information about the watch, see the watch manual at www.garmin.com/manuals.
-
Following the instructions in the watch manual, install the FUSION-Link Lite™ app from the Connect IQ™ store onto the watch.
-
On the stereo, press and hold until you hear Discoverable and flashes blue. The stereo remains discoverable for two minutes.
-
Bring the watch within 3 m (10 ft.) of the stereo.
NOTE: Stay 10 m (33 ft.) away from other ANT® devices while pairing. -
Open the FUSION-Link Lite app on the watch. The first time you open the app on the watch, the watch automatically pairs with and connects to the stereo. If you need to pair to another stereo, in the FUSION-Link Lite app, select Settings > Pair new.
-
Control the audio playback using the FUSION-Link Lite app on the watch.
After the devices are paired, they connect automatically when they are turned on, within range, and the app is open on the watch.
More Information
Installing a Different Language for the Voice Prompts
You can change the language of the voice prompts. Choose from English, Dutch, French, German, Italian, Spanish, Japanese, and Chinese.
- Go to www.fusionentertainment.com.
- Follow the on-screen instructions.
Specifications
| Ingress protection rating* | IEC 60529 IP65 |
|---|---|
| Dimensions with trim (W × H × D) | 344 x 155 x 50 mm (13.54 x 6.1 x 1.97 in.) |
| Weight | 1.15 kg (2.54 lb.) |
| Operating temperature range | From 0° to 50°C (from 32° to 122°F) |
| Long-term storage temperature range | From -20° to 70°C (from -4° to 158°F) |
| Bluetooth wireless range | Up to 10 m (33 ft.) |
| Bluetooth profiles | A2DP, AVRCP, SPP |
| Bluetooth version | 4.1 |
| ANT wireless range | Up to 3 m (10 ft.) |
| Input voltage | From 10.8 to 16.0 Vdc |
| Current (max.) | 10 A |
| Fuse | 10 A |
| USB | Type A port for USB flash drive or media player connection, also provides |
1 A charging
USB compatibility| Compatible Android Open Accessory (AOA) and Apple devices
USB format| FAT32
USB audio format| MP3, max. 250 files per root folder and each other folder
NOTE: The file load time varies based on the number and size of the files on the flash drive.
Speakers| Two 3 in. speakers with one passive radiator
Amplifiers| Class D, 2 x 43 W RMS @ 14.4 Vdc input,
≤ 1% THD+N
| Tuner | AM/FM (North America, Europe, Japan, Australasia) |
|---|---|
| Wireless frequency/ protocol | Bluetooth: Class 2 |
Bluetooth/ANT frequency: From 2,402 to 2,480 MHz
Bluetooth/ANT max. power: 9 dBm EIRP
Line output level (max.) (peak to peak)| 5.5 V
Aux. input level (typical) RMS| 1 V
IP rating does not include rear connectors.
| Tuner | Europe and Australasia | USA | Japan |
|---|---|---|---|
| FM radio frequency range | 87.5 to 108 MHz | 87.5 to |
107.9 MHz
| 76 to 95 MHz
FM frequency step| 50 kHz| 200 kHz| 50 kHz
AM radio frequency range| 522 to 1620 kHz| 530 to
1710 kHz
| 522 to
1620 kHz
AM frequency step| 9 kHz| 10 kHz| 9 kHz
Stereo Care
NOTICE
- Avoid extreme shock and harsh treatment, because it can degrade the life of the stereo.
- Do not use a sharp object to clean the stereo.
- Avoid chemical cleaners, solvents, sunscreen, and insect repellents that can damage plastic components and finishes.
- Thoroughly wipe the stereo with fresh water after exposure to chlorine, salt water, sunscreen, cosmetics, alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case.
- Do not store the stereo where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.
Registering Your FUSION Panel-Stereo
Help us better support you by completing our online registration today.
- Go to www.fusionentertainment.com.
- Keep the original sales receipt, or a photocopy, in a safe place.
Troubleshooting
My stereo does not respond to my key presses
- Press and hold for 10 seconds to reset the stereo. If necessary, press to turn the stereo back on.
I cannot hear the audio well or at all
- Check the volume setting on the connected device.
- Select a valid source for the stereo.
- Make sure the stereo is not muted or paused.
- Make sure the stereo is connected to power.
- Make sure the external AM/FM antenna is connected and positioned to receive broadcast signals.
The USB drive will not play
- Make sure the drive is formatted as FAT32.
- Make sure the tracks are in MP3 format and are saved in the root directory.
- Use the FUSION-Link app to navigate the USB folders.
- Make sure the music is not paused.
I cannot easily tune the stereo to a radio station
- Using the FUSION-Link app, press to select the manual tuning mode.
- Use the FUSION-Link app or press and to change the tuner region if you have traveled to a different country.
FUSION SUPPORT
- New Zealand 09 369 2900
- Australia 1300 736 012
- Europe +44 (0) 370 850 1244
- USA 623 580 9000
- Pacific +64 9 369 2900
© 2018 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.fusionentertainment.com for current updates and supplemental information concerning the use of this product.
Garmin®, the Garmin logo, FUSION®, and the Fusion logo are trademarks of
Garmin Ltd. or its subsidiaries, registered in the USA and other countries.
These trademarks may not be used without the express permission of Garmin.
Android™ is a trademark of Google™ Inc. Apple® and the Apple logo are
trademarks of Apple Inc., registered in the U.S. and other countries. App
StoreSM is a service mark of Apple Inc., registered in the U.S. and other
countries. The trademark iPhone® is used in Japan with a license from Aiphone
K.K. Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Garmin is under license. Other trademarks and trade
names are those of their respective owners.
FREQUENTLY ASKED QUESTIONS
What is the Fusion PS-A302B Panel-Stereo?
The Fusion PS-A302B Panel-Stereo is a marine-grade, compact all-in-one entertainment system designed for boats and other marine applications.
What are the key features of the Fusion PS-A302B Panel-Stereo?
Some key features include AM/FM radio, Bluetooth audio streaming, a USB port for media playback, AUX input, and a 2.3-inch LCD display.
Is the Fusion PS-A302B Panel-Stereo waterproof?
Yes, it is designed to be IPx5 waterproof, meaning it can handle water splashes and light rain without damage.
What is the power output of the Fusion PS-A302B Panel-Stereo?
It has a peak power output of 140 watts (70 watts RMS per channel).
Can it be used with Android and iOS devices?
Yes, the Fusion PS-A302B Panel-Stereo supports both Android and iOS devices through Bluetooth connectivity.
Does it come with a remote control?
Yes, it includes a compact remote control for convenient operation.
What types of media formats can it play from a USB drive?
The Fusion PS-A302B Panel-Stereo can play MP3 and M4A audio files from a USB drive.
Does it support external amplifiers?
Yes, it has a two-channel amplifier output for connecting external speakers or amplifiers.
Is there a built-in microphone for hands-free calling?
Yes, it features a built-in microphone for hands-free calling when connected to a compatible smartphone.
Can you adjust the display brightness?
Yes, the display brightness can be adjusted to suit your preferences and lighting conditions.
Does it have a built-in equalizer?
Yes, it comes with a built-in equalizer with preset sound profiles to customize the audio output.
Can it be flush-mounted on a boat's dashboard?
Yes, the Fusion PS-A302B Panel-Stereo is designed for flush-mount installation.
Does it have an AM/FM antenna included?
Yes, it includes an AM/FM antenna for radio reception.
What is the voltage requirement for this system?
The Fusion PS-A302B Panel-Stereo operates on a 12V DC power supply commonly found in boats and marine vehicles.
Can it be used as a standalone unit or does it require additional accessories?
It can be used as a standalone unit, but you may need additional accessories like speakers, amplifiers, and subwoofers for a complete audio setup.
Download the PDF Link:Fusion PS-A302B Panel-Stereo Owner’s Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>