BEOK TGP508 WiFi Touch Screen Thermostat User Manual
- June 13, 2024
- BEOK
Table of Contents
BEOK TGP508 WiFi Touch Screen Thermostat
THIS THERMOSTAT IS SUITABLE FOR WATER HEATING, ELECTRIC HEATING AND GAS BOILER
welcome
Thank you for your trust and support. By adopting higher-end technology
andmore perfect tochnology your new thermostat will provide you with the mont
temperature environment every day in the future, making vour life more
comfortable and your living environment more stylish and beautiful. For
detailed instructions on the installation and use of this thermostat, please
read this manual Please contact a nrolescional to instal the thermostat for
vou and install and use the product to the extent permitted by law.
Application
Intelligent digital temperature controller is a floor heating system suitable
for room temperature control and household temperature control. It controls
the operating state of the floor heating equipment by comparing the ambient
temperature with the set temperature, which improves comfort and achieves
energy saving. This digital temperature controller adopts microcomputer
control technology and is equipped with full-screen display touch buttons,
which is elegant in design and easy to use. The thermostat has manual
automatic, programmable and state memory functions.
Technical data
- Temperature sensor:NTC
- Temperature accuracy: ‡1°C
- Power consumption:<1W
- Voltage:AC100-240V 60HZ
- Load current:3A/16A
- Temperature setting:5~60 °C
Product packaging
- Thermostat host ———1PC
- Manual——— 1PC
- Qualification certificate ———-1PC
- Screw ———-2PCS
- Sensing line (optional)———1PC
Product Model
- GA Plumbing 3A
- GB Electric Heating 16A
- GC linkage, gas boiler 3A
- GE: Plumbing 3A + linkage, gas boiler 3A
User Notes
- Please read this manual carefully. Improper operation may damage the product or cause dangerous conditions.
- The installation personnel must be well-trained and experienced service technicians.
- After installation, please read this manual carefully and operate the product according to the instructions.
Caution: Risk of electric shock or equipment damage.
Wiring Diagram
Note: WP for water heating; EP for electric heating; WPB for gas boiler
Installation procedure
This product is installed with a standard 86 control switch (in compliance
with European regulations)
- Connect the power box according to the wiring diagram
- Separate the power supply from the control board cable
- Screw the power supply into thebox of 86
- Connect the power board to the control board line, and align the buckle at 30 degrees to complete the installation.
Description of display & Icon
Operating Instruction
- Power on/off: Long press M for 3 seconds on/off the thermostat.
- Press the M key to switch between manual and automatic modes.
- Press and for 3 seconds to add or cancel the child lock.
- WIFI link: When the thermostat is on, long press button for 5 seconds and the thermostat display will come out Now the WIFI icon flashes, at this time the thermostat into the state of code.
- Long press M key and key to enter the clock setting, press M key to switch Settings Item, press and d keys to adjust the value of each parameter. Note: the time of WIFI model wil be Automatically gets Internet time
- In the shutdown state, Long press key Detech the ground temperature.
Time programming instructions
Long press M key and key Enter the programming settings. Short press M key
Switching options, Press the or key Adjust the parameters of each option.
Long press M key Exit saving.
Advanced options
When POWER OFF, press the M key and the key for 3 seconds to enter the
advanced option setting. Press M to enter the next option, press and to
adjust, and Long press M to exit the height Level option.
About WIFI connection
Before using the WIFI thermostat for the first time, you should set the WIFI signal and configuration through your smart phone or tablet to allow communication between your connected devices. WIFI link: For Bluetooth thermostat, please turn on Mobile phone Bluetooth
-
Download the APP
Search for “Tuya” in App market or scan below QR Code to download -
Register Account If you don’t have an APP account yet, you can choose to register or log in via SMS verification code. Click “Create a new account”, you will enter the Tuya Smart Platform Privacy Policy page. After you click Agree, you will officially enter the mobile phone registration page.
The system automatically determines the current country/region. You can also select the country/region manually. After entering your mobile phone number or email address, click “get verification code” . Enter the received verification code, then enter the password, and click “finish” to register successfully. -
Add device Click “add device” or “+” on the top right of the APP homepage to enter the “add device” page. Currently, there are two ways to manually add device and search device.
Find the thermostat product (WIFI model) in the device list. In the specified network mode, the indicator flashes (slowly flashes) and then click the confirm button on the page. Select the device’s work area to connect to the WIFI of the Internet and enter the WIFI password. Click “ok” to enter the matching network process.
If the default mode distribution network is selected,
the distribution process APP is shown in figure 1 below, and the distribution
network successfully displays the interface shown in figure 2. The name of the
device can be changed or the location of the room can be selected. 
If the
distribution network fails, the APP will display the page shown in the figure
below. You can choose to add or view the help again. Note: if the connection
fails, please confirm whether the temperature control device has entered the
code matching state, refer to item 6 of the operation manual. 
-
Display of temperature controller APP interface
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>