DIGITUS DS-55202 HDMI KVM Extender Over IP Set Installation Guide

HDMI KVM
Extender over IP, Set Quick Installation Guide
DS-55202 Rev.3

Introduction

The Digitus HDMI KVM extender set consists of a sender unit (local location) as well as a receiver unit (remote location). The HDMI signal can be extended by means of a network cable (CAT 6, 5e, 5) up to a maximum distance of 120m. The HDMI signal can also be extended to an unlimited distance via the existing network infrastructure (via IP connection). The highest supported video resolution is 1080p / 60 Hz. It also makes convenient access on a computer (mouse and keyboard) possible via the USB ports on the receiver unit. It is perfectly suited to industrial, commercial and public applications.

Product Features

• Extends the maximum length for HDMI cable to up to 120 m via a simple network cable
• Extension of the signal (unlimited distance) over the existing local network infrastructure (over IP onnection)
• Highest supported video resolution: 1080p / 60 Hz
• Supports KVM function – convenient control of mouse and keyboard via USB on the receiver unit
• Supports LAN-standard 802.3 Ethernet 10/100/100 Mbps
• LED activity indicator for function, keyboard and mouse
• Supports UTP/STP CAT 5/ 5e/6/7 network cables in accordance with IEEE-568B standard
• Plug & Play, no additional software required

Package Content

• 1x HDMI Extender transmitter unit
• 1x HDMI Extender receiver unit
• 2x Power supply unit: DC 5V/1A
• 1x Instruction manual
• 1x USB cable

Specification

Part No.|

DS-55202

---|---
Technical| Transmitter-TX| Receiver-RX
Signal format| HDMI 1.3
HDCP| HDCP 1.2
HDMI connector| Type A, 19 pin, Female
Transmission distance| CAT5/80 meters, CAT5e/100meters, CAT6/120 meters
LAN connector| RJ-45
Video bandwidth| 70Mbps
resistance| 750
Video Latency| 70ms
HDMI resolution supported| 640480@60Hz 1024768@60Hz 1360768@60Hz 14001050@60Hz 19201080@60Hz| 800600@60Hz 1280720@60Hz 1440900@60Hz 1680*1050@60Hz
Audio support| PCM (44.1KHz, 48KHz)
KVM function (connect with PC, keyboard/mouse)| connect with PC| connect with keyboard/mouse
Switch Connection| yes
Input| lx HDMI lx USB (to connect with PC) mouse)| 2x USB (to connect with keyboard/ lx RJ45
---|---|---
Output| lx RJ45| lx HDMI
Mechanical| Transmitter-TX| Receiver-RX
Housing| Metal enclosure
Dimension| 109.6 (L) x 89.5 (w) x 26.3 (H) mm
Net weight| 235g| 237g
Power supply| DCSV 1A
Power consumption| < 3.5W| < 3.5W
Operation temperature| 0-60°C
Storage temperature| -20-70°C
Relative humidity| 20-90% (no condensation)

Penal Description

Transmitter unit (TX)

1. Power indicator
2. USB connection indicator
3. LAN signal output
4. Reset button
5. Power input (DC5V)
6. HDMI signal input
7. USB port: to connect with PC

Receiver unit (RX)

1. Power indicator
2. USB connection indicator
3. LAN signal input
4. Reset button
5. Power input (DC5V)
6. HDMI signal output
7. USB port: to connect with keyboard/mouse

NOTE: Point to multi-point connection via switch is supported too, but under point to multi-point configuration, it is strongly recommended to operate KVM function on one receiver only at the same time.
6.2 Over IP Connection Diagram

NOTE: Transmission distance depends on type of network cable, CAT5: 80m, CAT5E: 100m, CAT6: 120m.

Installation Requirements

1. HDMI source device (computer graphics card, DVD, PS3, HD monitoring equipment etc.).
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
3. UTP/STP CAT6/6A/7 cable, follow standard IEEE-568B.

Troubleshooting

connecting well and the output voltage value is
correct as recommended
No sound or sound issues| Maybe the HDMI connection is not well; the audio format is not supported by the displays; the| Please check if the HDMI cables are connecting well; if the audio format is supported by the displays, customers can change to the supported
| source player set another port to output audio| audio format or the player`s audio output is setting HDMI audio output or not
No picture or picture flicker| Maybe the HDMI cable quality and UTP cable quality is not good enough or not connecting well| Please check if the HDMI and UTP connection is well or change another good quality HDMI 1.4 standard HDMI cable or UTP (CAT5e/CAT6 or higher is recommended) cable will solve the issue.

This is a Class A product. In home environment, this product may cause radio interference. In this case, the user may be required to take appropriate measures.
Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.

www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany

References

• ASSMANN Electronic GmbH | Germany
• ASSMANN Electronic GmbH | Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>