VORTEX Triumph HD 10×42 Binocular User Manual
- June 13, 2024
- VORTEX
Table of Contents
VORTEX Triumph HD 10×42 Binocular
Product Information
The product is a binocular with the following specifications:
- Magnification
- Objective Lens Diameter
- Linear Field of View (@1000 Yards)
- Angular Field of View
- Close Focus
- Eye Relief
- Interpupillary Distance
- Diopter Range
- Prism Type
- Prism Material
- Height
- Width
- Weight
Product Usage Instructions
Adjusting the Eyecups
- When not using glasses, fully extend the eyecups.
- When using glasses, fully collapse the eyecups.
Adjusting the Interpupillary Distance
- Rotate the binocular barrels inward or outward to line up your eyes with the ocular lenses.
- Match the interpupillary distance (IPD) of your eyes to the binocular so that you see a single image free of edge distortion.
Focusing the Binocular
- Choose an object about 20 yards away from you.
- Stay in the same spot until you have adjusted the binocular for your eyes.
- Follow this two-step process:
Adjust the center focus to get a clear image of the object.
Adjust the diopter to compensate for any difference in vision between your
eyes.
Attaching Accessories
- To attach the binocular tether straps:
- Thread the wide end of the binocular tether straps through the harness strap buckles.
- Size to fit by adjusting the one-size-fits-all harness strap.
- Thread the binocular tether straps through the strap attachments on the binocular.
- Thread the binocular tether straps back through the tether strap buckles to secure
- To attach the padded neck strap
- Push a few inches of the strap through the strap attachment on the binocular.
- Hold the buckle and thread the end of the strap through the buckle.
- Adjust the overall length, then pull tight until the strap is secured within the buckle.
Note : If using another type of strap, never attach metal o-rings directly onto the strap attachment.
Maintenance
- Cleaning: Use a soft cloth or brush to remove dirt and debris. For stubborn dried water spots, a small amount of alcohol can be used.
- Lubrication: The binocular components are permanently lubricated and should not require additional lubricant. Do not attempt to disassemble any components, as it may void the warranty.
- Storage: Store the binocular in a dry and safe place when not in use.
Warranty
The product comes with an unlimited, unconditional, lifetime warranty. No registration, box, or receipt is required for the warranty to be honored.
SPECS
- MAGNIFICATION X OBJECTIVE LENS DIAMETER 10×42
- LINEAR FIELD OF VIEW (@1000 YARDS) 334′
- ANGULAR FIELD OF VIEW 6.4˚
- CLOSE FOCUS 15.3′
- EYE RELIEF 17.0mm
- INTERPUPILLARY DISTANCE 55mm – 75mm
- DIOPTER RANGE ±5.0
- PRISM TYPE Roof
- PRISM MATERIAL BaK-4
- HEIGHT 6.1″
- WIDTH 5.0″
- WEIGHT 22.9 oz.
Images are for representation only.
Product may vary slightly from what is shown.
TRIUMPH® HD 10×42 BINOCULAR
Get the binocular with the best image quality, ergonomics, and durability in its class. Water, fog, and shockproof. Fully multi-coated lenses for edge-to- edge sharpness and light transmission you’d expect in binos that cost a lot more. Stow them in your truck, backpack, or go-bag. This rugged, HD optical system delivers adjustable eyecups and a diopter for custom, comfortable viewing. Also ships with useful neck strap and adjustable GlassPak™ harness for fast access and easy carry wherever outdoor adventure takes you.
BASIC OPERATION
Adjust the Eyecups
The eyecups on Triumph® HD twist up and down allowing anyone to obtain a full
field of view and comfortable viewing despite differences in facial structure
and for use with or without glasses.
When not using glasses, generally the eyecups will be fully extended. When
using glasses, generally the eyecups will be fully collapsed.
Adjust the Interpupillary Distance
The interpupillary distance (IPD) is the distance between the centers of the
left and the right eye pupils. Match the IPD of your eyes to the binocular so
that you see a single image free of edge distortion.
Focus the Binocular
- For the best results, follow this two-step process to properly adjust the center focus and diopter. Choose an object about 20 yards away from you and stay in the same spot until you have adjusted the binocular for your eyes.
- Adjust the Center Focus – Start by closing your right eye or covering the right objective lens with your hand. Look through the left barrel and adjust the center focus wheel until the image is in focus. Leave the center focus in position as you adjust the diopter.
- Adjust the Diopter – Start by closing your left eye or covering the left objective lens with your hand. Look through the right barrel and adjust the diopter until the image is in focus. Make note of the position of the diopter setting in case you need to set it again. From this point on, you will only need to use the center focus wheel.
ACCESSORIES
GlassPak™ Binocular Harness
The GlassPak™ Binocular Harness stores and protects your binoculars while
keeping them close at hand for quick deployment. Tethers attach to your
binocular for added security against accidental drops while the fully
adjustable straps create a comfortable fit.
Follow these steps to attach the binocular tether straps.
- Thread the wide end of the binocular tether straps through the harness strap buckles.
- Size to fit by adjusting the one-size-fits-all harness strap.
- Thread the binocular tether straps through the strap attachments on binocular.
- Thread the binocular tether straps back through the tether strap buckles to secure.
Lens Covers
The Triumph® HD comes with tethered objective lens covers and a rainguard for
the ocular lenses. Use these covers to protect the lenses whenever you are not
using your binocular.
Neck Strap
Attach the padded neck strap in these three simple steps:
- Push a few inches of the strap through the strap attachment on the binocular.
- Hold the buckle and thread the end of the strap through the buckle.
- Adjust the overall length, then pull tight until the strap is secured within the buckle.
Note : If using another type of strap, never attach metal o-rings directly onto the strap attachment.
MAINTENANCE
Cleaning
Your binocular requires very little routine maintenance other than
periodically cleaning the exterior lenses. The binocular exterior may be
cleaned by wiping with a soft cloth. When cleaning the lenses, be sure to use
products that are specifically designed for use on coated optical lenses.
- Be sure to blow away any dust or grit on the lenses prior to wiping the surfaces.
- Using your breath, or a very small amount of water or pure alcohol, can help remove stubborn dried water spots.
Lubrication
All binocular components are permanently lubricated, so no additional
lubricant should be applied.
Note : Other than to remove the Rainguards, Objective Lens Covers, and
Tripod Adapter Socket Cap, do not attempt to disassemble any binocular
components. Disassembling of binocular may void warranty.
Storage
If possible, avoid storing your binoculars in direct sunlight or any very hot
location for long periods of time.
Caution : Binoculars are not intended for looking at the sun, or any
other intense light source. Such viewing could damage the retina and cornea of
your eyes – even to the point of causing blindness.
NOTICE
Virtual Patent Marking Notice By Vortex Optics
This product may be protected by patents in the U.S. and elsewhere for Vortex
Optics. http://vtx.legal website is provided to satisfy the virtual patent
marking provisions of various jurisdictions including the virtual patent
marking provisions of the America Invents Act and provide notice under 35
U.S.C. §287(a). Please visit http://vtx.legal to view list of products that
may be covered by one or more U.S./Foreign patents or published patent
applications.
VIP WARRANTY
OUR UNCONDITIONAL PROMISE TO YOU.
We promise to repair or replace the product. Absolutely free.
- Unlimited.
- Unconditional.
- Lifetime Warranty.
You do not have to register, save the box, or a receipt for the Warranty to be
honored.
Learn more at VortexOptics.com
service@VortexOptics.com • 1-800-4VORTEX
Note : The VIP Warranty does not cover loss, theft, deliberate damage, or
cosmetic damage not affecting product performance.
For the most up to date manual visit
VortexOptics.com
M-00332-0
© 2022 Vortex Optics
® Registered Trademark and TM Trademark of Vortex Optics. Patent Pending