StarTech.com HD2A HDMI Audio Extractor User Manual
- June 13, 2024
- StarTech.com
Table of Contents
StarTech.com HD2A HDMI Audio Extractor
Packaging contents
- 1 x HDMI audio extractor
- 1 x USB power cable
- 1 x Toslink adapter
- 1x quick install guide
System requirements
- HDMI source device (e.g. Blu-ray player, computer)
- SPDIF or 3.5mm audio destination device, such as an audio receiver or speakers
- HDMI cabling for the source device
- SPDIF or 3.5mm audio cabling for the destination device
Operating system requirements are subject to change. For the latest requirements, please visit www.startech.com/HD2A..
Specifications
- Maximum supported resolution for video pass-through: Up to 1920 x 1200 or 1080p
- Audio specifications: SPDIF audio – up to 2.1 surround sound 3.5mm audio – 2-channel stereo
Operation notes
- The USB power source port must be connected to a USB power source such as a computer or a USB power adapter. This is required in all configurations for the adapter to operate.
- For SPDIF audio, connect the included Toslink adapter to the 3.5mm analog and SPDIF output port, then connect your SPDIF cabling to the adapter.
- If, once connected, the output of your destination device plays static with no audio, it’s likely your source device is set to bit-stream audio (unprocessed). As a result, it will be necessary to adjust this setting to PCM (Pulse-code modulation) in the output settings of your audio source device. Please consult the manual included with your HDMI source device for instructions.
- If an HDMI audio source that’s higher than 2.1-channel is sent through the adapter, it will not be audible. It will be necessary to adjust this setting in your video source to output to 2.1 channel.
Product Overview
Front View
Left side and back view
Right side view
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
FREQUENTLY ASKED QUESTIONS
What is the StarTech.com HD2A HDMI Audio Extractor?
The StarTech.com HD2A HDMI Audio Extractor is a device that allows you to extract the audio signal from an HDMI source and output it separately, either through analog or digital audio connections.
What is the purpose of an HDMI audio extractor?
An HDMI audio extractor is used when you want to extract the audio from an HDMI signal and send it to a different audio device, such as speakers, soundbars, or receivers, while keeping the video signal going to your display or TV.
How does the HD2A HDMI Audio Extractor work?
The HD2A HDMI Audio Extractor is connected between the HDMI source (e.g., Blu- ray player, gaming console) and the display. It extracts the audio signal from the HDMI input and provides audio output through its analog or digital audio ports.
What audio output options does the HD2A HDMI Audio Extractor have?
The HD2A typically offers both analog audio output (3.5mm stereo or RCA) and digital audio output (Toslink/optical) options.
What HDMI version does the HD2A support?
The HD2A HDMI Audio Extractor supports HDMI 1.4, which includes 4K@30Hz and 1080p resolutions.
Does the HD2A support HDCP (High-bandwidth Digital Content Protection)?
Yes, the HD2A is HDCP compliant, allowing it to work with copy-protected content.
Is the HD2A a powered device?
Yes, the HD2A HDMI Audio Extractor requires external power and is usually powered through a micro USB port.
Can I use the HD2A with gaming consoles?
Yes, you can use the HD2A with gaming consoles to extract the audio and connect it to external speakers or a sound system.
What resolutions and refresh rates does the HD2A support?
The HD2A typically supports video resolutions up to 4K@30Hz and 1080p@60Hz.
Does the HD2A support Dolby Digital or DTS audio formats?
The HD2A HDMI Audio Extractor can usually support standard audio formats, including PCM, LPCM, and stereo audio. However, support for Dolby Digital and DTS may vary depending on the specific model.
Can the HD2A downmix surround sound to stereo audio?
Yes, the HD2A can downmix surround sound audio to stereo audio when using its analog audio output.
Does the HD2A support HDMI-CEC (Consumer Electronics Control)?
The HD2A does not typically support HDMI-CEC, which means it won't pass through CEC commands from the source to the TV or display.
Is the HD2A compatible with Apple TV?
The HD2A should be compatible with most HDMI sources, including Apple TV.
Can I use the HD2A to connect my computer to external speakers?
Yes, the HD2A can be used to extract audio from an HDMI output of your computer and send it to external speakers.
Download the PDF Link:StarTech.com HD2A HDMI Audio Extractor User Manual