jialisi C36 True Wireless Bluetooth Headset Instruction Manual
- August 5, 2024
- jialisi
Table of Contents
jialisi C36 True Wireless Bluetooth Headset
FAQ
- What do the LED indicators on the headset and charging case signify?
- The LED indicators provide information about power status, pairing, connection status, and charging status. Refer to the user manual for detailed explanations of each LED signal.
- How can I ensure successful connection with my mobile device?
- Make sure the earphones are paired with your mobile device and that Bluetooth is enabled. The earphones will automatically connect to the mobile device when turned on if previously paired.
Packing list
Product diagram
Tips
- Except for the operation methods specifically marked in the manual,please do not try to disassemble or replace any parts in the earbuds.
- Don’t put the earbuds in the water or any other liquid.The earbuds are not waterproof.
- lf any liquid enters the product by accidentally,please disconnect and remove the connection immediately.
- Please make sure that there is no water on your hands when ln stalling or uninstalling the product to avoid electricshock.
- Do not put the product near by the heat source or expose it to the fire source directly.
- Do not put the product in the environment with strong electro-magnetic force, otherwise, it will cause product malfunction.
Specifications
Product specifications
- Bluetooth version: V5.4
- Transmission distance: ≤10M
- Music time: 6-7hours
- Horn size: ф16mm
- Charging time: 1.5hours±0.5hours
- Battery capacity: 38mAh
- Rated input: 5V 30mA
- Standby time: 12 hours
Charging case specifications
- Battery capacity: 200mAh
- Charging time: 1 hours±0.5 hours
- Rated input: 5V 220mA
(All technical information is subject to actual performance)
Charge the charging bay Connect the charging bay to the 5V power adapter with
a Type-C charging cable.
( Warm tip: low voltage warning if the voltage is lower than 3.4V (once
every 60 seconds)(Voice prompt: didi))
- Rated input: 5V 30mA (headset)
- Rated input: 5V 220mA (charging case)
LED Indicator Status
| Power On | Left and right earphone flashing |
|---|---|
| Power Off | When it is steady on, turn off the indicator |
| Power-on automatic pairing | Left and right earphone flashing |
| Pair left and right earphones | Primary headphone flashing |
| Successful connection | Turn off the light |
| disconnect | Primary headphone flashing |
| Earphone charging | The white lamp keeps on |
Product Operation Instructions
-
Turn on
- Take out the headset and turn it on or (manually press the Touch button for 3 seconds to turn it on)
-
Turn off
- Turn off the headset in the warehouse or (manually press the Touch button for 5 seconds to shut it off)
-
Pairing and joining
Enter the pairing state: -
Open the cover of the charging cabin and take out the earphones. The left and right earphones will start automatically.
-
When the headset is connected to the mobile phone, the headset automatically enters the pairing state after manually turning off the Bluetooth of the mobile phone.
* Headset Connect to mobile phone:When the headset is paired, select “C36” in the Bluetooth list of mobile phone to pair. After the pairing is successful, the earphone will play “Connected/ Connected successfully”
* ( **Note:** headset pairing status is not connected to the device, it will automatically shut down after 3 minutes)Link back:
- After thelleft and right earphones are turned on, they will be connected back automatically
- After the headset is successfully paired with the mobile phone, the headset will automatically connect to the mobile phone after it is turned on when the Bluetooth of the mobile phone is enabled
Touch operation
SIRO
MUSIC MODE
CALL MODE
The name and content of harmful substances in the earbuds
Warranty Statement
Disclaimer
This user manual does not have any form of guarantee, position expression or other implication. The mentioned products, specifications and information are for reference only, and the content will also be updated on the web at any time without additional separate notice
Warranty statement:
The product attached to this document is guaranteed as follows: If the product is twelve (12)months from the date of purchase(“Warranty Period”),under normal conditions of use due to quality defects damaged,can be repaired.Free repair;free replacement if the manufacturer confirms that it ca nnot be repaired; repaired or replaced product. Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days). Purchased by sale the ticket date shall prevail;if the purchase date cannot be determined,the warranty period shall be 13(13) months
If you apply for a warranty,please call the product service hotline first and execute it in the manner instructed by us. When applying for warranty, you need to provide an accurate, complete and clearly filled out valid sa les invoice.
The above guarantee does not apply to the following situations:
- Exceeding the validity period of the three packs;
- Altering the warranty card and product code does not match the product body;
- Causes caused by misuse,abuse or improper transportation,use, maintenance or storage obstacles or damage;
- Failure or damage caused by force majeure (such as earthquake,war, disaster, etc.) or accident bad;
- The zipper and tower buckle are damaged due to excessive forc e;
- Disconnection or tearing caused by excessive load;
- Any damage caused by sharp objects;
- Products with signs of burning of flooding;
- Damage caused by unauthorized disassembly;
- Aging, discoloration, abrasion, rupture and other losses that occur during the normal use of the product.
- If the original identification label of the product is changed or damaged,this guarantee will become invalid.
The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee.You should check on t he spot and raise objections to any discrepancies.
The above guarantees are all guarantees we make regarding the products,and are only applicable in mainland China.Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>