STIHL FCB-KM Curved Lawn Edger Instruction Manual
- June 4, 2024
- STIHL
Table of Contents
FCB-KM Curved Lawn Edger
STIHL FCB-KM
Instruction Manual
Original Instruction Manual
Contents
KombiSystem
2
Guide to Using this Manual
2
Safety Precautions and Working
Techniques
2
Using the Unit
6
Approved KombiEngines
8
Assembling the Unit
9
Mounting the KombiTool
9
Mounting the Cutting Blade
10
Starting / Stopping the Engine
10
Storing the Machine
11
Replacing the Depth Wheel
11
Replacing the Skirt
12
Replacing the Cutting Blade
12
Checking and Replacing the Wear
Guard
13
Maintenance and Care
13
Minimize Wear and Avoid Damage 14
Main Parts
15
Specifications
16
Maintenance and Repairs
17
Disposal
17
EC Declaration of Conformity
18
UKCA Declaration of Conformity 18
English
Dear Customer, Thank you for choosing a quality engineered STIHL product. It
has been built using modern production techniques and comprehensive quality
assurance. Every effort has been made to ensure your satisfaction and trouble-
free use of the product. Please contact your dealer or our sales company if
you have any queries concerning this product. Your
Dr. Nikolas Stihl
Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2021 0458-471-0121-B. VA0.H21. 0000006834_013_GB
FCB-KM
This instruction manual is protected by copyright. All rights reserved,
especially the rights to reproduce, translate and process with electronic
systems.
1
English
KombiSystem
In the STIHL KombiSystem a number of different KombiEngines and KombiTools can
be combined to produce a power tool. In this instruction manual the functional
unit formed by the KombiEngine and KombiTool is referred to as the power tool.
Therefore, the separate instruction manuals for the KombiEngine and KombiTool
should be used together for the power tool. Always read and and make sure you
understand both instruction manuals before using your power tool for the first
time and keep them in a safe place for future reference.
2
Guide to Using this Manual
Pictograms
All the pictograms attached to the machine are shown and explained in this
manual.
Symbols in text
WARNING Warning where there is a risk of an accident or personal injury or
serious damage to property.
NOTICE Caution where there is a risk of damaging the machine or its individual
components.
Engineering improvements
STIHL’s philosophy is to continually improve all of its products. For this
reason we may modify the design, engineering and appearance of our products
periodically. Therefore, some changes, modifications and improvements may not
be covered in this manual.
Safety Precautions and Working Techniques
Special safety precautions must be observed when working with this power edger
because it has a sharp cutting blade that rotates at very high speed.
Always read and and make sure you understand both instruction manuals
(KombiMotor and KombiTool) before using your power tool for the first time and
keep them in a safe place for future reference. Nonobservance of the safety
precautions may result in serious or even fatal injury.
Lend or rent your power tool only to persons who are familiar with this model
and its operation do not lend your power tool without the KombiMotor and
KombiTool instruction manuals.
Use the power edger only for cutting the edges of paths, flower beds and
lawns.
Do not use your power tool for any other purpose because of the increased risk
of accidents.
Only use blades and accessories that are explicitly approved for this power
tool by STIHL or are technically identical. If you have any questions in this
respect, consult a servicing dealer.
Use only high quality tools and accessories in order to avoid the risk of
accidents and damage to the machine.
FCB-KM
STIHL recommends the use of genuine STIHL tools and accessories. They are
specifically designed to match the product and meet your performance
requirements.
The deflector on this power edger cannot protect the operator from all objects
thrown by the cutting blade (stones, glass, wire, etc.). Such objects may
ricochet and then hit the operator.
Never attempt to modify your machine in any way since this may increase the
risk of personal injury. STIHL excludes all liability for personal injury and
damage to property caused while using unauthorized attachments.
Do not use a pressure washer to clean your power tool. The solid jet of water
may damage parts of the power tool.
Clothing and Equipment
Wear proper protective clothing and equipment.
Clothing must be sturdy but allow complete freedom of movement. Wear snug-
fitting clothing, an overall and jacket combination, do not wear a work coat.
Avoid clothing that could get caught on branches or brush or moving parts of
the machine. Do not wear a scarf, necktie or jewelry. Tie up long hair so that
it is above shoulder level.
Wear steel-toed safety boots with non-slip soles.
WARNING
To reduce the risk of eye injuries, wear close-fitting safety glasses in
accordance with European Standard EN 166. Make sure the safety glasses are a
comfortable and snug fit. Wear hearing protection, e.g. earplugs or ear muffs.
Wear a face shield and make sure it is a good fit. A face shield alone does
not provide adequate eye protection.
Wear heavy-duty work gloves made of durable material (e.g. leather).
STIHL offers a comprehensive range of personal protective clothing and
equipment.
English Transporting the Power Tool
Always shut off the engine. Carry the power tool properly balanced by the
drive tube cutting blade in front of you. Do not touch hot parts of the
machine since burn injury will result. Transporting by vehicle: Properly
secure your power tool to prevent turnover, fuel spillage and damage.
002BA079 KN
FCB-KM
3
English
Before Starting
Check that your power tool is properly assembled and in good condition refer
to appropriate chapters in the KombiMotor and KombiTool instruction manuals.
Blade correctly and securely mounted and in good condition (clean, move
freely, not warped).
Inspect the deflectors for damage and wear. Do not operate the machine with
a damaged deflector replace damaged parts.
Never attempt to modify the controls or safety devices work only with a
properly mounted deflector.
Keep the handles dry and clean free from oil and dirt for safe control
of the power tool.
Adjust the harness and handle(s) to suit your height and reach.
To reduce the risk of accidents, operate your power tool only if it is in a
safe condition.
If you use a shoulder strap or full harness: Practice removing and putting
down the machine as you would in an emergency. To avoid damage, do not throw
the machine to the ground when practicing.
Holding and Controlling the Power Tool
Make sure you always have good balance and secure footing.
Always hold the power tool firmly with both hands on the handles.
Models with loop handle
On models with a loop handle and barrier bar, left hand on loop handle, right
hand on control handle, even if you are left-handed. Models with bike handle
Right handle on control handle, left hand on left handle. During Operation In
the event of impending danger or in an emergency, switch off the engine
immediately by moving the slide control / stop switch / button to 0 or STOP.
15m (50ft)
002BA055 KN
002BA080 KN
The cutting attachment may catch and fling objects a great distance and cause
injury – therefore, do not allow any other persons within a radius of 15
meters of your own position. To reduce the risk of damage to property, also
maintain this distance from other objects (vehicles, windows). Even
maintaining a distance of 15 meters or more cannot exclude the potential
danger.
To reduce the risk of injury, avoid contact with the blade.
The correct engine idle speed is important to ensure that the blade stops
moving when you let go of the throttle trigger. Check and correct the idle
speed setting regularly. If the cutting blade still rotates when the engine is
idling, have your dealer check your machine and make proper adjustments or
repairs see KombiMotor instruction manual.
To reduce the risk of injury from thrown objects, never operate the unit
without the proper deflector for the machine and cutting attachment being
used.
The gearbox becomes hot during operation. To reduce the risk of burn injury,
do not touch the gear housing.
Take special care in slippery conditions (ice, wet ground, snow) on slopes
or uneven ground.
4
FCB-KM
Watch out for obstacles: Roots and tree stumps which could cause you to trip
or stumble.
Inspect the work area: Stones, pieces of metal or other solid objects may be
thrown more than 15 meters and cause personal injury or damage the cutting
attachment and property (e.g. parked vehicles, windows).
To avoid the risk of electric shock, never use your power tool in areas where
electrical lines are laid on the surface or buried just below the surface.
Striking and damaging such lines with the KombiTool could cause serious or
even fatal injury.
Make sure you always have good balance and secure footing.
Special care must be taken when working in difficult, over-grown terrain.
Be particularly alert and cautious when wearing hearing protection because
your ability to hear warnings (shouts, alarms, etc.) is restricted.
To reduce the risk of accidents, take a break in good time to avoid tiredness
or exhaustion.
Work calmly and carefully in daylight conditions and only when visibility is
good. Stay alert so as not to endanger others.
FCB-KM
Do not touch the cutting blade while the engine is running. If the blade
becomes jammed by an obstruction, switch off the engine immediately before
attempting to remove the obstruction risk of injury.
Opening the throttle while the blade is blocked increases the load and reduces
engine speed. The clutch then slips continuously and this causes overheating
and damage to important components (e.g. clutch, polymer housing components)
and this can increase the risk of injury from the cutting attachment moving
while the engine is idling.
If your power tool is subjected to unusually high loads for which it was not
designed (e.g. heavy impact or a fall), always check that it is in good
condition before continuing work see also “Before Starting”. Make sure the
safety devices are working properly. Do not continue operating your power tool
if it is damaged. In case of doubt, consult your servicing dealer.
Check the cutting blade at regular short intervals during operation or
immediately if there is a noticeable change in cutting behavior:
Turn off the engine. Hold the unit firmly and press the blade into the
ground to bring it to a standstill.
Check condition and tightness, look for cracks.
Replace a damaged blade immediately, even if it has only superficial cracks.
English
Clean the cutting attachment and deflector at regular intervals during
operation.
Shut down the engine.
Wear gloves.
Remove grass, weeds, clumps of soil, etc.
To reduce the risk of injury, shut off the engine before changing the cutting
attachment.
Do not continue using or attempt to repair a damaged or cracked blade by
welding or straightening risk of out of balance.
This may cause parts of the cutting attachment to come off and hit the
operator or bystanders at high speed and result in serious or fatal injuries.
If a rotating metal cutting attachment makes contact with a rock or other
solid object there is a risk of sparking which may cause easily combustible
material to catch fire under certain circumstances. Dry plants and scrub are
also easily combustible, especially in hot and dry weather conditions. If
there is a risk of fire, do not use metal cutting attachments near combustible
materials, dry plants or scrub. Always contact your local forest authority for
information on a possible fire risk.
After Finishing Work
After finishing work or before leaving the power tool unattended: Shut off the
engine.
After finishing work, clean dirt, soil and plant residue off the cutting
attachment wear gloves to reduce the risk of injury.
5
239BA011 KN 239BA015 KN
English
Do not use grease solvents for cleaning.
After thoroughly cleaning, coat surface of metal cutting attachments with a
corrosion inhibitor.
Cutting attachments and deflectors
Maintenance and Repairs
Using the Unit
Service the machine regularly. Do not attempt any maintenance or repair work
not described in the KombiTool and KombiEngine instruction manuals. Have all
other work performed by a servicing dealer.
STIHL recommends that you have servicing and repair work carried out
exclusively by an authorized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training courses and are supplied
with the necessary technical information.
Only use high-quality replacement parts in order to avoid the risk of
accidents and damage to the machine. If you have any questions in this
respect, consult a servicing dealer.
STIHL recommends the use of genuine STIHL replacement parts. They are
specifically designed to match your model and meet your performance
requirements.
To reduce the risk of injury, always shut off the engine before carrying out
any maintenance or repairs or cleaning the machine.
The arrow on the deflector shows the direction of rotation of the blade see
“Use”.
Operate the edger only the skirt attached to the deflector see “Replacing
the skirt”.
Handle the blade correctly see “Use”.
Optimum cutting performance: at full throttle and with uniform feed.
STIHL recommends the use of genuine STIHL blades see “Special accessories”.
Only use deflectors or attachments which have been approved by STIHL for this
machine or which are technically equivalent.
Your power edger is designed to produce sharp contoured borders around lawns
and flower beds. It will cut almost all types of grass, weeds and soft green
plants.
Preparations
If the work area is very dry, spray it lightly with water: this softens the
soil and ensures that less dust is created. Slightly damp green plants are
easier to cut.
WARNING
Clear away all obstacles and solid objects from the work area.
6
FCB-KM
N Plan the best route for edging. Always hold and operate your edger on the
right-hand side of your body.
Adjusting Depth of Cut
Adjust correctly
English
239BA014 KN
2
1 A
N Shut down the engine. N Loosen the wingnut (1)
counterclockwise. N Push wheel (2) upwards to increase
the depth of cut (A) or downwards to reduce the depth of cut (A).
239BA012 KN
2 3 B
The depth of cut depends on the unevenness of the ground, your height and the
way you hold the edger. Use the following procedure: N Adjust the depth wheel
(2) so that
the blade (3) just touches the ground or breaks the surface of the soil by no
more than 5 mm (B)
239BA013 KN
N Tighten down the wingnut clockwise.
N Standing in the normal working position, check the depth of cut again and
correct it if necessary.
239BA015 KN
FCB-KM
WARNING Do not adjust the deflector. The deflector has been set at the factory
so that the arrow on the deflector and the open side point away from the
7
English
operator. This ensures that cuttings and other debris are directed away from
the power tool and operator.
Edging
N Always walk forwards when cutting, do not pull the unit towards you.
N Cut at a steady pace to avoid having to make several passes.
Approved KombiEngines
KombiEngines
Only use KombiEngines supplied or
1
explicitly approved by STIHL for use with the attachment.
This KombiTool may be operated only in combination with the following KombiEngines:
STIHL KM 55 R, KM 56 R, KM 85 R, KM 90, KM 90 R, KM 94 R, KM 100, KM 100 R, KM 110, KM 110 R, KM 130, KM 130 R, KMA 130 R, KMA 135 R
N Start the engine
N Start the cut at no less than half throttle and continue cutting at full
throttle.
N Hold and guide your power tool so that the blade is vertical.
N Cut steadily so that the engine is not lugged down do not apply force.
N Operate at no more than a normal walking pace.
N Do not push the blade into the ground.
239BA016 KN 239BA017 KN
N Use the gunning sight (1) to line the blade up with the edge of the bed.
WARNING Loop-handled machines must be equipped with a barrier bar.
Brushcutters with split boom
The KombiTool can also be fitted to STIHL brushcutters with a split boom
(Tmodels) (basic power tools). This KombiTool can therefore also be used on
the following machine: STIHL FR 130 T
WARNING Refer to the user manual of the power tool for use of the barrier bar.
8
FCB-KM
Assembling the Unit
2 4
English
Mounting the KombiTool
2
1
002BA326 KN
413BA014 KN
002BA327 KN
N Pull the protective caps off of the ends of the shaft and keep them in a
safe place for later use see “Storing the Machine”
Connecting drive tube to gearbox
1
2
N Loosen the clamping screw (1) on the gearbox do not remove
N Insert curved end of drive tube (3) in the gearbox (2), turn the gearbox
back and forth as necessary.
N Push the shaft (3) in as far as it will go.
N Screw in the clamping screw (1) as far as it will go do not tighten yet!
239BA018 KN
N Align the gearbox (2) on the shaft so that the rib (4) is in line with the
shaft.
N Tighten the clamping screw firmly.
239BA019 KN
N Push the lug (1) on the drive tube into the slot (2) in the coupling sleeve
as far as stop.
3
4
When correctly installed, the red line (3) (arrow point) must be flush with
the end of the coupling sleeve. N Tighten down the star knob (4)
firmly.
Removing the KombiTool
N Reverse the above sequence to remove the drive tube.
FCB-KM
9
English
Mounting the Cutting Blade
N Turn nut clockwise (left-hand thread) and remove it.
N Remove the thrust washer.
N Place the edger so that the blade mounting (1) faces upwards
5
239BA020 KN
7 10
6 47
9 8
Starting / Stopping the Engine
Starting the engine
To start the engine, basically follow the instructions for use for the
KombiEngine or basic power tool!
9926BA009 KN
239BA022 KN
9926BA010 KN
6
2
4
3
N Insert the locking pin (2) as far as possible into the bore (3), push
lightly and rotate back and forth a little together with the thrust washer (4)
until the shaft is blocked.
N Fit Allen wrench (5) onto nut (6).
239BA021 KN
N Position the blade (7) on the thrust plate (8).
WARNING The collar (arrow) must engage the hole in the blade. N Fit the thrust
washer (4) on the shaft
(9) and block the shaft. N Screw nut (6) counterclockwise
onto shaft and tighten.
WARNING If the cup spring (10) on the nut (6) becomes fatigued, then the nut
must be replaced!
N Place the machine on the ground in a secure position
The blade must not touch the ground or any other objects risk of accident!
N Assume a firm stance possibilities: standing, bending or kneeling
N Press the machine firmly against the ground with the left hand do not
touch the control elements on the control handle while doing so see
instruction manual for the KombiEngine or basic power tool
10
FCB-KM
English
NOTICE Do not stand or kneel on the shaft!
WARNING If the engine is started, the blade may rotate as soon as the engine
is running therefore blip the throttle trigger as soon as the engine is
running the engine begins to idle. The other starting procedure is described
in the instruction manual for the KombiEngine or basic power tool.
Switching off the engine
N see instruction manual for the KombiEngine or basic power tool
Storing the Machine
For periods of 3 months or longer
N Remove, clean and inspect the cutting blade.
N If the KombiTool is removed from the KombiEngine and stored separately: Fit
the protective cap on the drive tube to avoid dirt getting into the coupling.
N Store the machine in a dry, high or locked location out of the reach of
children and other unauthorized persons.
Replacing the Depth Wheel
Have a worn depth wheel replaced by a servicing dealer. STIHL recommends that
you have servicing and repair work carried out exclusively by an authorized
STIHL servicing dealer.
Depth Wheel
2
1
N The end of the thread on the screw (1) is peened over to ensure that the
wingnut (2) does not work loose and be lost.
A very high torque has to be applied to remove the wingnut from the screw. If
the parts are then reassembled, the captive function is no longer guaranteed.
In such a case have the screw and wingnut replaced by a servicing dealer.
239BA023 KN
FCB-KM
11
English
Replacing the Skirt
Fitting the skirt
Replacing the Cutting Blade
239BA024 KN 239BA025 KN 239BA026 KN
Removing the skirt
5
4
1
6
2
3
N Undo and remove the screw (1).
N Remove the washer (2)
N Pull the skirt (3) out of the segment (6) and out of the gap (5) in the
deflector
12
5
4
6
3
N In order to push the skirt easily into the gap on the deflector, apply a
thin coating of resin-free oil to the top of the skirt
N Thread the skirt (3) into the segment (6) and push into the gap (5) of the
deflector the bore in the skirt must be fixed in the arbor (4)
N Place washer (2) onto screw (1). N Insert and tighten the screw (1)
1 A
CB
Do not attempt to straighten or weld a bent or cracked blade it may break
it must be replaced see “Mounting the Cutting Blade”.
STIHL recommends you use only the following original STIHL cutting blades:
Length
200 mm 200 mm
Thickness
2.4 mm
3.8 mm
Marking
4133 / 01 4133 / 02
Do not resharpen the blade.
N Replace the blade (1) if its length (A) is no longer sufficient to maintain the necessary ground clearance (B) and obtain the required depth of cut (C).
Checking Out-of-Balance
To avoid out-of-balance:
N Have your dealer check the blade for out-of-balance on a STIHL balancer
(special accessory) STIHL recommends an authorized STIHL servicing dealer.
If blade is out-of-balance, fit a new one see “Mounting the Cutting Blade”.
12
FCB-KM
Checking and Replacing the Wear Guard
Checking the protection against wear
1 2
N Before starting up the machine, check that the protection against wear (1)
is not damaged
N Replace the protection against wear at the latest when the gearbox (2)
becomes visible (arrow)
NOTICE If worn deflectors are not replaced in time, this can cause serious
damage to the gearbox.
257BA017 KN 239BA027 KN
Replacing the protection against wear
454
N Remove the blade see “Fitting the blade”
N Unscrew screws (4) N Replace the protection against
wear (5) N Screw in and tighten screws (4) N Fit the blade see “Fitting the
blade”
English
Maintenance and Care
The following information applies in normal operating conditions. The
specified intervals must be shortened accordingly when working for longer than
normal or under difficult cutting conditions (extensive dust, etc.).
All accessible screws, nuts and bolts N check and retighten if necessary
Wheel N Visual inspection, before starting
work N Check that the wingnut is secure,
before starting work N Have it replaced if necessary see
“Replacing the wheel”
Skirt N Visual inspection, before starting
work N Replace if damaged see
“Replacing the skirt”
Blade N Visual inspection, before starting
work N Check that it is secure, before
starting work N If necessary, have it checked to see
if it is out of balance, replace if it is out of balance see “Replacing the
blade” N Replace if damaged see “Replacing the blade”
FCB-KM
13
English
Protection against wear N Check before starting work N Replace if necessary
see “Check
and replace protection against wear”
Safety information label N Replace illegible safety information
labels
Minimize Wear and Avoid Damage
Observing the instructions in this manual and the KombiEngine manual helps
reduce the risk of unnecessary wear and damage to the power tool.
The power tool must be operated, maintained and stored with the due care and
attention described in these instruction manuals.
The user is responsible for all damage caused by non-observance of the safety
precautions, operating and maintenance instructions. This includes in
particular:
Alterations or modifications to the product not approved by STIHL.
Using tools or accessories which are neither approved or suitable for the
product or are of a poor quality.
Using the product for purposes for which it was not designed.
Using the product for sports or competitive events.
Consequential damage caused by continuing to use the product with defective
components.
Maintenance Work
All the operations described in the chapter on “Maintenance and Care” must be
performed on a regular basis. If these maintenance operations cannot be
performed by the owner, they should be performed by a servicing dealer.
STIHL recommends that you have servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are regularly given the opportunity to attend
training courses and are supplied with the necessary technical information.
If these maintenance operations are not carried out as specified, the user
assumes responsibility for any damage that may occur. Among other parts, this
includes:
Corrosion and other consequential damage resulting from improper storage.
Damage to the product resulting from the use of poor quality replacement
parts.
Parts Subject to Wear and Tear
Some parts of the power tool are subject to normal wear and tear even during
regular operation in accordance with instructions and, depending on the type
and duration of use, have to be replaced in good time. Among other parts, this
includes:
Blades (all types)
Mounting hardware for blade
Deflector, skirt
Wear guards
14
FCB-KM
Main Parts
2 1
3 4
5
English
1 Blade 2 Guard 3 Shaft 4 Wheel 5 Wingnut 6 Skirt 7 Protection against wear 8
Gearbox
8
6
7
400BA011 KN
FCB-KM
15
English
Specifications
Engine speed
Max. output shaft speed on cutting attachment with KombiEngine:
KM 55 R: KM 56 R: KM 85 R:
7700 rpm 8100 rpm 8500 rpm
KM 90 R:
8300 rpm
KM 94 R:
8300 rpm
KM 100 R:
8300 rpm
KM 110 R: KM 130 R: KMA 130 R: KMA 135 R:
8300 rpm 8500 rpm 6890 rpm 6890 rpm
Max. output shaft speed (cutting attachment) on STIHL brushcutters with split shaft (T models):
FR 130 T:
8300 rpm
Weight
with deflector and blade: 2.0 kg
Sound and Vibration Levels
Noise and vibration data measurements on power tools with the FCB-KM KombiTool
include idling and rated maximum speed with the same duration of exposure.
For further details on compliance with Vibration Directive 2002/44/EC see
www.stihl.com/vib
Sound pressure level Lpeq to ISO 11201
KM 55 R with loop handle: 93 dB(A)
KM 56 R with loop handle: 94 dB(A)
KM 85 R with loop handle: 96 dB(A)
KM 90 R with loop handle: 90 dB(A)
KM 100 R with loop handle:
90 dB(A)
KM 130 with bike handle: 95 dB(A)
KM 130 R with loop handle:
95 dB(A)
FR 130 T:
94 dB(A)
Sound pressure level Lpeq to ISO 11789 KM 94 R with loop handle: 92 dB(A)
Sound pressure level Lpeq in accordance with 50636-2-92
KM 130 R with loop handle:
78 dB(A)
Sound pressure level Lpeq in accordance with 50636-2-100
KM 135 R with loop handle:
79 dB(A)
Sound power level Lweq in accordance with ISO 3744
KM 55 R with loop handle: 103 dB(A)
KM 56 R with loop handle: 104 dB(A)
KM 85 R with loop handle: 108 dB(A)
KM 90 R with loop handle: 101 dB(A)
KM 100 R with loop handle:
101 dB(A)
KM 130 with bike handle: 105 dB(A)
KM 130 R with loop handle:
105 dB(A)
FR 130 T:
105 dB(A)
Sound power level Lweq in accordance with ISO 11789
KM 94 R with loop handle: 104 dB(A)
Sound power level Lw in accordance with EN 50636-2-92
KM 130 R with loop handle:
93 dB(A)
Sound power level Lw in accordance with EN 50636-2-100
KM 135 R with loop handle:
99 dB(A)
Vibration level ahv,eq to ISO 11789
Handle, left
KM 55 R with
loop handle and
ErgoStart:
5.6 m/s2
KM 56 R with loop handle:
KM 85 R with loop handle:
5.5 m/s2 3.2 m/s2
KM 90 R with loop handle:
KM 100 R with loop handle:
4.5 m/s2 3.7 m/s2
KM 130 with bike handle:
5.8 m/s2
KM 130 R with loop handle: 6.1 m/s2
FR 130 T:
3.9 m/s2
Handle, right
7.3 m/s2 6.6 m/s2 6.0 m/s2
3.5 m/s2 4.8 m/s2
3.6 m/s2 6.8 m/s2 2.3 m/s2
16
FCB-KM
Vibration level ahv,eq in accordance with ISO 22867
KM 94 R with loop handle:
Handle, Handle,
left
right
4.9 m/s2 4.1 m/s2
Vibration level ahv,eq in accordance with EN 50636-2-92
KM 130 R with loop handle:
Handle, left
3.5 m/s2
Handle, right
2.0 m/s2
Vibration level ahv,eq in accordance with EN 50636-2-91
KM 135 R with loop handle:
Handle, left
1.8 m/s2
Handle, right
3.6 m/s2
The K-factor in accordance with Directive 2006/42/EC is 2.0 dB(A) for the sound pressure level and sound power level; the K-factor in accordance with Directive 2006/42/EC is 2.0 m/s2 for the vibration level.
REACH
Maintenance and Repairs
Users of this machine may only carry out the maintenance and service work
described in this user manual. All other repairs must be carried out by a
servicing dealer.
STIHL recommends that you have servicing and repair work carried out
exclusively by an authorized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training courses and are supplied
with the necessary technical information.
When repairing the machine, only use replacement parts which have been
approved by STIHL for this power tool or are technically identical. Only use
highquality replacement parts in order to avoid the risk of accidents and
damage to the machine.
STIHL recommends the use of original STIHL replacement parts.
Original STIHL parts can be identified by the STIHL part number, the { logo
and the STIHL parts symbol K (the symbol may appear alone on small parts).
English
Disposal
Observe all country-specific waste disposal rules and regulations.
STIHL products must not be thrown in the garbage can. Take the product,
accessories and packaging to an approved disposal site for environmentfriendly
recycling. Contact your STIHL servicing dealer for the latest information on
waste disposal.
000BA073 KN
REACH is an EC regulation and stands for the Registration, Evaluation,
Authorisation and Restriction of Chemical substances.
For information on compliance with the REACH regulation (EC) No. 1907/2006 see
www.stihl.com/reach.
FCB-KM
17
English
EC Declaration of Conformity
ANDREAS STIHL AG & Co. KG Badstr. 115 D-71336 Waiblingen
Germany
declare under our sole responsibility that
Designation: Make: Series: Serial identification number:
KombiTool edger STIHL FCB-KM
4180
conforms to the relevant provisions of Directive 2006/42/EC and has been developed and manufactured in compliance with the following standards in the versions valid on the date of production:
EN ISO 12100 (in conjunction with the specified KM and FR models).
EN ISO 12100, EN 60335-1, EN 506362-92 (in conjunction with the specified KMA tools).
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG Produktzulassung
The year of manufacture is specified on the power tool.
Waiblingen, 15.07.2021 ANDREAS STIHL AG & Co. KG pp
Dr. Jürgen Hoffmann Director Product Certification & Regulatory Affairs
UKCA Declaration of Conformity
ANDREAS STIHL AG & Co. KG Badstr. 115 D-71336 Waiblingen
Germany
declare under our sole responsibility that
Designation: Make: Series: Serial identification number:
KombiTool edger STIHL FCB-KM
4180
conforms to the relevant provisions of the UK Supply of Machinery (Safety) Regulations 2008 and has been manufactured in compliance with the following standards in the versions valid on the date of production:
EN ISO 12100 (in conjunction with the specified KM and FR models).
EN ISO 12100, EN 60335-1, EN 506362-92 (in conjunction with the specified KMA tools).
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
The year of manufacture is indicated on the power tool.
18
FCB-KM
Waiblingen, 15.07.2021 ANDREAS STIHL AG & Co. KG pp Dr. Jürgen Hoffmann
Director Product Certification & Regulatory Affairs
FCB-KM
English 19
English
20
FCB-KM
0458-471-0121-B englisch G
www.stihl.com
04584710121B 0458-471-0121-B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>