BOULT AUDIO EQCHARGE ProBass Neckband User Manual
- June 13, 2024
- BOULT AUDIO
Table of Contents
BOULT AUDIO EQCHARGE ProBass Neckband
Product Introduction
The EQCHARGE is a wireless headset that allows you to listen to music and answer phone calls. It comes with various features and accessories for your convenience.
Pairing Steps
- Make sure the headset is powered off.
- Press and hold the Multi-Function Button (MFB) for 5 seconds until the indicator light flashes red and blue alternatively.
- Turn on Bluetooth on your mobile device.
- Select “Boult Audio Probass” from the list of available Bluetooth devices and connect.
- To connect with a second mobile device, turn off Bluetooth on
the first mobile device and repeat step 3.
Important Features
| Action | Instructions |
|---|---|
| Power On | Press and hold the Multi-Function Button (MFB) for 3 seconds |
until the BLUE light flashes.
Power Off| Press and hold the MFB for 5 seconds until the RED light turns
on for 2 seconds.
Call Answer| Answer the call using your phone or press the MFB.
Call End| End the call using your phone or press the MFB.
Call Reject| Reject the call using your phone or press and hold the MFB for
2 seconds.
Last Number Redial| Quickly tap the MFB twice to redial the last dialed phone
number.
Play Music| Press the MFB to play/pause music during music playback.
Track Control| Press and hold the Volume+ button for 3 seconds to skip to the
next song. Press and hold the Volume- button for 3 seconds to play
the previous song.
Volume Adjust| Tap the Volume+ or Volume- button to increase or decrease the
volume.
Voice Prompt
- You will hear “Power On” when the headset is powered on.
- You will hear “Power Off” when the headset is powered off.
- You will hear “Connected” when the headset is paired.
- You will hear “Low Battery” when the headset is in low power status.
Warning:
-
Use and keep the headset under ambient temperatures. Do not
throw it to avoid product damage. -
Do not disassemble, repair, or alter the headset.
-
Do not clean the headset with chemical solvent.
-
Use a USB charger of DC5V to charge the headset if necessary.
-
Do not discard the headset at random or put it into fire or
high-temperature environment (60/140) to avoid danger.
Accessories:
- Instructions x 1pc
- USB charging cable x 1pc
- Earbuds x 3pcs
Product Introduction
Pairing Steps
Press and hold 5s
Under power-off status, press and hold the MFB until the indicator light Flashes red and blue alternatively, then the Headset enters the pairing mode. Turn on Bluetooth on your mobile, and the Boult Audio Probass of the Headset, and connect. Turn off Bluetooth of the mobile, and repeat the step above to connect with the second mobile.
Important Features
Power on\off
Power on- Press and hold the multi-function button (MFB) for 3s until the BLUE
light flashes. Power off- Press and hold the MFB for 5s till the RED light on
for 2s.
Call answer
Call answer- Answer by your phone of press the MFB.
Call End
Call end- End by your phone or press the MFB.
Call Reject
Call reject- Reject by your phone or press and hold the MFB for 2s.
Last Number Redial
Last number redial- Quickly tap the MFB. twice to redial the last dialed phone
number.
Play Music
Play music- Press the MFB to play\pause music under music playing status.
Track Control
Track control- Press and hold the “Volume+” button for 3s to skip to the next
song; Press and hold the “Volume-” button for 3s to play the previous song.
Volume Adjust
Volume adjust- Tap the “Volume+” of “Volume -” button to increase or decrease
the volume.
Voice Prompt
- You will hear “power on” when the Headset is power on.
- You will hear “power off” when the Headset is powered off.
- You will hear “connected” when the Headset is paired.
- You will hear “low battery’’ when the Headset is in low power status.
Warning:
- Use and keep the Headset under ambient temperatures.
- Don’t throw it in case product damage caused.
- Don’t disassemble, repair or alter the Headset.
- Don’t clean the Headset with a chemical solvent.
- Use a USB charger of DC5V to charge the Headset if necessary.
- Don’t discard the Headset at random, or put it into fire
- or high-temperature environment (60/140) in case of danger.
Accessories:
- Instructions x1pc
- USB charging cable x 1 pc
- Earbuds x 3 pcs
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>