SCOSCHE BTFreq Pro Bluetooth FM Transmitter User Manual

BTFREQ™ PRO

Overview

1. FM Channel Display
2. Tuning Knob
3. Microphone
4. Multifunction Button (MFB)
5. 12V Plug| 6. Channel Button
7. 3.5mm AUX OUT
(3.5mm audio cable not included)
8. USB-A Charging Port
9. USB-C Charging Port
---|---

Power Up & Bluetooth Pairing

1. Plug the BIFREQ into your car’s 12V power socket.
2. Enter the Bluetooth settings in your mobile device and enable the Bluetooth function. From the list of available accessories, find and select the “Scosche BIFM9″
3. Your phone will confirm once it is connected. Once connected, ensure your device is set to maximum volume.

Connecting to your Car’s Stereo

Find a weak station on your FM radio that has no active broadcast signal.
Press the “CH” button (1), then turn the tuning knob to the left (2) or right (3) to tune the BIFREQ to match the frequency of your FM radio.
If you experience interference you may have entered an area where there is an active broadcast signal on the station you are tuned to. Repeat the above steps to find a different clear station.
Note: Press “CH” button to change frequencies on BIFREQ (1).

Reconnect to your Device

Transmitter Off: Once paired, the transmitter will automatically reconnect when powered on.
Transmitter On: Reconnect – Tap Multi-Function Button (MFB) once
*Note: Only tap MFB if the transmitter does not automatically reconnect.| Optional AUX OUT Connection
The source unit can be connected to the BTFREQ through
the AUX OUT port using a 3.5mm audio cable (not included).
---|---
|

Streaming Music

Stream music using the music player on your phone. You can use the controls on the BTFREQ to control the music settings:
Play/Pause – Tap the MFB once
Track Forward – Turn tuning knob right
Track Back – Turn tuning knob left

Making a Call

Use your mobile phone to make a call as you normally would. Phone call audio will automatically stream through the BIFREQ.
Hang Up – Tap the MFB once
Redial last number called – Double tap MFB

Receiving a Call

Phone call will come in through the BIFREQ.
Press MFB once to answer the call
Press MFB once to end the call
Press MFB twice to reject the call

Voice Assistant Activation & Dual-Port USB Charger

Press and hold the Multi-function button for 3 seconds to activate your smartphone’s voice assistant.| Your BIFREQ PRO includes (1) USB-C port and (1) USB-A port to charge your devices while driving. Simply connect using a cable suitable for your device (not included).
---|---
|

SPECIFICATIONS

Input Power: 12-24V 3A
Bluetooth v5.0, Class Il, up to 33 ft. (10m)
Bluetooth Profiles: HFP A2DP
FM Transmitter Frequency Range: 88.1 – 107.9MHz (200 KHz steps)
USB-A Output: 5V 2.4A
USB-C Output: 5V ****2.4A

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Please note that changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canadian Compliance Statement

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class [B] digital apparatus complies with Canadian ICES-003, RSS -Gen and RSS-210.

Portable Device Statements
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

BTFREQ Pro How-to Video…

https://qrco.de/bdriOM

Scosche Industries 1550 Pacific Avenue
Oxnard, California 93033
Phone: 800-363-4490 x1 / 805-486-4450 x1
www.scosche.com
©2023 Scosche Industries

Scosche & BTFREQ are trademarks of Scosche Industries.
Other marks or brands are the property of their respective owners.
Devices and or appearance may vary.
Designed in Oxnard, California
S| BTFM9 5/23

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>