POWER-LITE ENM-SMB-B Surface Mount BOX Installation Guide
- June 13, 2024
- POWER-LITE
Table of Contents
**POWER-LITE ENM-SMB-B Surface Mount BOX Installation Guide
**
Installations
-
Step 1
Unlock the cover of the surface mount box with a flat screwdriver. -
Step 2
Fix LED driver, battery and PA terminal onto the base. Have battery connected to the driver, draw wires from the driver and connect them to the terminal. -
Step 3
Knock out the mains power cable entry hole, and fix the base onto ceiling with 4 screws. Connect the cable into terminal, have lamp head fixed onto cover, and safety rope connected, Connect the lamp head cable with driver. -
Step 4
Click the cover on the base, and finish installation.
1800 909 306
nedlandsgroup.com.au
[email protected]
Read User Manual Online (PDF format)
Loading......