brennenstuhl HL 300 AD Rechargeable LED Hand Lamp Instruction Manual
- June 4, 2024
- brennenstuhl
Table of Contents
brennenstuhl HL 300 AD Rechargeable LED Hand Lamp
SAFETY INFORMATION
- Carefully read these operating instructions before using the device. · Do not use the light if it is damaged.
- In this case, contact an electrician or refer to the specified service address.
- Do not look directly into the light. · Never open the device.
- Do not use the working light in potentially explosive atmospheres – risk of death!
- To charge the batteries, only use a certified USB power supply unit.
COMMISSIONING
- Before using the device for the first time, completely discharge and recharge the rechargeable battery once.
- Switch ①: LEDs 100% – 30% – Off.
- The product can be used during charging.
- Charging indicator ②: red during charging, green when accumulator is charged.
- In cases of extended non-use, charge the rechargeable every 3 months.
CONTROL ELEMENTS
① On/Off switch
② Charging indicator (red/green)
③ Front LEDs
④ USB charging socket
⑤ Rotatable hook
⑥ Magnet
⑦ Crank for dynamo
⑧ USB charging cable/Micro-USB
CHARGING
with USB charging cable
Charge your battery using the supplied USB cable only.
Exclusively use a certified USB power source (e.g. charging device, computer)
with a maximum of 5 V output voltage:
Connection: USB source – USB charging cable – charging socket ④.
with crank for dynamo
50 rotations ⑦ provide for light for 5 min.
TECHNICAL DATA
| Rechargeable battery: | integrated, lithium-ion 3.7 V/1.8 Ah |
|---|---|
| Charging duration: | ~4 h |
| IP class: | IP 20 |
| Temperature range: | -10 °C – +40 °C |
| Batteries and accumulators must not be
disposed of in the household waste!
As a consumer, you are legally obliged to hand in all batteries and
accumulators at a collection point in your community/urban district or in the
trade, so that they can be disposed of in an environmentally friendly manner,
otherwise there are possible risks to the environment and human health.
---|---
CONFORMITY DECLARATION
The Declaration of Conformity is filed with the manufacturer.
For further information, please refer to the Service/FAQ section on our
homepage www.brennenstuhl.com.
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 ∙ D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra technik ag
Blegistrasse 13 ∙ CH-6340 Baar
Brennenstuhl UK Ltd.
No 1 Royal Exchange ∙ L ondon EC3V 3DG. UK
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>