POOLCANDY 208902 Illuminated LED Pool Island Instruction Manual

June 13, 2024
POOLCANDY

POOLCANDY-LOGO

POOLCANDY 208902 Illuminated LED Pool Island

POOLCANDY-208902-Illuminated-LED-Pool-Island-PRODUCT-
IMAGE

Product Information:

  • Product Name: PoolCandy Inflatable with Livelights
  • Manufacturer: PoolCandy
  • Product Features: 3 light modes
  • Battery Requirements: 3 x AA batteries (not included)
  • Inflation Method: Nozzle
  • Water Resistance Rating: IPX7 (up to 1 meter deep)

Product Usage Instructions

Turning on the Product:

  1. Press the top button on the compartment to turn on the product.

Battery Installation:

  1. Remove the water-resistant cap by unscrewing it counter-clockwise.
  2. Slide out the expired batteries from the compartment.
  3. Insert 3 new AA batteries, ensuring proper polarity as marked on the compartment.
  4. Reinsert the battery compartment into its housing.
  5. Screw the cap back on – do not overtighten.

Inflation:

  1. Inflate the product using a nozzle.
  2. Be careful not to overinflate.
  3. Check for any leaks.

Safety Instructions

Warnings:

  • Adult assembly is required.
  • Use only under adult supervision.
  • This is not a life-saving device or a flotation device.
  • Do not leave a child unattended while the device is in use.
  • Product contains flashing lights that may cause adverse reactions in certain individuals. Use caution, especially around those with known sensitivities to flashing lights.

Battery Handling:

  • Do not mix old and new batteries.
  • Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

FCC Notice:
This device complies with Part 15 of the FCC Rules. It should not cause harmful interference and must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not approved by the responsible party could void the user’s authority to operate the product.

Care & Handling:

  • Avoid submerging the product deeper than 1 meter as it is designed for normal use up to that depth.

Contact Information:
If you have any questions or need additional information about PoolCandy products, please contact us at [email protected].

Congratulations on your purchase of your PoolCandy® Illuminated LED Pool Island featuring LiveLights Technology– the perfect accessory for any pool or beach party!

HOW to USE
Press the top button on the compartment to turn on. The product features 3 light modes.

  • MODE 1 – FAST CYCLE
  • MODE 2 – SLOW CYCL
  • MODE 3 – ALWAYS ON

BATTERY REQUIREMENTS
This product requires 3 x AA batteries, not included.

BATTERY INSTALLATION

  1. Remove water-resistant cap by unscrewing it counter-clockwise
  2. Slide the expired batteries out of the compartment
  3. Insert 3 new AA batteries, making sure to follow the polarity as marked inside the compartment.
  4. Insert the battery cartridge back into the housing.
  5. Screw the cap back on – do not over-tighten.

INFLATION

  1. Inflate via nozzle
  2. Be sure not to overinflate
  3. Check for leaks

Do not mix Old and New batteries.
Do not mix Alkaline, Standard (Carbon-Zinc), or rechargeable (Nickel-Cadmium) batteries.

  • WARNING:
    CHOKING HAZARD – SMALL PARTS NOT FOR CHILDREN UNDER 3 YEARS.

  • WARNING:
    ADULT ASSEMBLY REQUIRED!

  • WARNING:
    USE ONLY UNDER ADULT SUPERVISION. THIS IS NOT A LIFE SAVING DEVICE. THIS IS NOT A FLOTATION DEVICE. DO NOT LEAVE CHILD UNATTENDED WHILE DEVICE IS IN USE.

CAUTION:

  • Do not let any sharp objects touch or rub the surface of the product.
  • When assembling, do not let children play around the working area.
  • Please confirm all parts are correct before starting the assembly process.

WARNING:
This product contains flashing lights, which can cause seizures, headaches, dizziness, and/or other chemical problems in certain individuals.
Caution should be exercised when using this product, particularly around people who have adverse reactions to flashing lights.

FCC NOTICE

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CARE & HANDLING

  • Includes a Patch Kit
  • Do not submerge the product in any liquids other than water
  • Keep unit dry when not in use
  • Do not place product near powerful, unshielded magnets
  • Do not expose the product to extreme hot or cold temperatures
  • Do not jump into the product
  • Do not cut, poke, or try to disassemble the product for any reason
  • Do not drag the product on a hard or abrasive ground as it may puncture the inflatable
  • Do not adhere or apply any hardware or attachments to the product not recommended by the manufacturer

BATTERY HANDLING INFORMATION

  • Non-rechargeable batteries are not to be recharged
  • Rechargeable batteries must be removed before recharging
  • Rechargeable batteries should only be recharged under adult supervision
  • DO NOT MIX alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium & nickel-metal hydride) batteries
  • Exhausted batteries are to be removed
  • Do not mix old and new batteries
  • Do not dispose of batteries in fire; batteries may explode or leak
  • Do not dispose of product in fire, batteries may explode or leak
  • If this product will not be used for an extended period of time, remove the batteries from the product
  • The supply terminals are not to be short-circuited
  • Batteries are to be inserted with the correct polarity
  • Clean the battery contacts and also those of the product prior to battery installation
  • As always, dispose of batteries in an eco-friendly manner

Your PoolCandy inflatable using Livelights technology is water resistant rated to IPX7. This means that it is designed for normal use up to 1 meter deep, please avoid submerging your product any deeper depth.

NOTICE:

  • Inspect the product before each use. Unfold the product on a flat surface before inflating and check for any damage.
  • If you encounter any difficulty inflating the product, pinch or squeeze the base of the air valve to ease the flow of air into your inflatable. Keep in mind that over-inflation can also cause damage, as this will put stress on the inflatable seams and may burst. Ideally, inflate the product only until the shape is fairly wrinkle-free.
  • If damage is found, and air leakage occurs, please use our included patch kit.

POOLCANDY is a trademark of B&D GROUP. ©2022 All rights reserved. All rights reserved.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

POOLCANDY User Manuals

Related Manuals