POOLCANDY LED Pool Volleyball Instruction Manual
- June 13, 2024
- POOLCANDY
Table of Contents
VOLLEYBALL
INSTRUCTION MANUAL
VOLLEY-BALL
MANUEL D’INSTRUCTION
LED Pool Volleyball
There is a maximum of 2-3 players on one side of the court at all times. The
maximum number of touches per side is 3. That means you can only hit the ball
(or contact it) at most 3 times before having to hit the ball over the net to
the other side. The objective of the game is to send the volleyball over to
the opposing team’s side of the net so that the other team cannot send the
ball back to your own side.
Every game begins with a server who will serve the ball over from one side of
the court to the other. When the receiving team wins a volley that team gains
the right to serve on the next play and all players on the receiving team
will rotate clockwise one position. A point is earned whenever the opposing
team cannot return the ball to the other side within 3 hits or when they allow
the ball to drop to the ground. This is one way to win a volley. When a team
“kills”/hits the ball onto the opponent’s court, then a point is rewarded to
that team. This is another way to win a volley. The point is only valid if the
ball touches the water. If the ball hits the outside of the pool, then your
opponents will score a point. Team wins when you reach a point total
determined before you play.
BATTERY REQUIREMENTS
This product requires 3 x AA batteries, included.
BATTERY INSTALLATION
- Remove water-resistant cap by unscrewing it counter-clockwise
- Slide both expired batteries out of the compartment
- Insert 3 new AA batteries, making sure to follow the polarity as marked inside the compartment.
- Insert the battery cartridge back into the housing.
- Screw the cap back on– do not over-tighten.
Do not mix Old and New batteries.
Do not mix Alkaline, Standard (Carbon-Zinc), or rechargeable (Nickel-Cadmium)
batteries.
WARNING:
Do not let any sharp objects touch or rub the surface of the product.
When assembling, do not let children play around the working area.
Please confirm all parts are correct before starting the assembly process
- Inspect the product before each use. Unfold the product on a flat surface before inflating and check for any damage.
- If you encounter any difficulty inflating the product, pinch or squeeze the base of the air valve to ease the flow of air into your inflatable.
- Keep in mind that over-inflation can also cause damage, as this will put stress on the inflatable seams and may burst. Ideally, inflate the product only until the shape is fairly wrinkle-free.
- If damage is found, and air leakage occurs, please use our included patch kit.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>