POLARIS Ranger Gen 2 Rear Bumper Instruction Manual

POLARIS Ranger Gen 2 Rear Bumper

Product Information

• Fitment: Polaris Ranger 1000 (2013-2017), Polaris Ranger 900 (2013-2018)
• Part Number: 200-1107-G2

Installation Instructions

1. Remove the tailgate to access the outer 10mm bolts on each side behind the tailgate.
2. With the bolts removed, hold the bumper into place and secure it by reusing the 10mm bolts. Leave the bolts loose until all hardware is in.
3. Using the supplied hardware, secure the bumper to the frame and tighten all hardware.
4. Installation is complete. Note: Torque to factory specifications.

Polaris Ranger Gen 2 Rear Bumper Installation Instructions Fitment

• 13-17 Ranger 1000
• 13-18 Ranger 900

Part #: 200-1107-G2

1. Remove tailgate to access the outer 10mm bolts on each side behind tailgate.
2. With bolts removed hold bumper into place and secure reusing the 10mm bolts. Leave bolts loose until all hardware is in.
3. Using the supplied hardware secure bumper to frame and tighten all hardware. Installation is complete

Note : torque to factory specs

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>