CANDY FCNE896XRLWF Oven Instruction Manual
- June 13, 2024
- Candy
Table of Contents
FCNE896XRLWF Oven User Instructions
OVENS
Safety Indications
-
During cooking, moisture may condense inside the oven cavity or on the glass of the door. This is a normal condition. To reduce this effect, wait 10-15 minutes after turning on the power before putting food inside the oven. ln any case, the condensation disappears when the oven reaches the cooking temperature.
-
Cook the vegetables in a container with a lid instead of an open tray.
-
Avoid leaving food inside the oven after cooking for more than 15/20 minutes.
-
WARNING: the appliance and accessible parts become hot during use.
Be careful not to touch any hot parts. -
WARNING: the accessible parts can become hot when the oven is in use. Young children should be kept at a safe distance.
-
WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of electric shocks.
-
Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance.
-
WARNING: in order to avoid any danger caused by the accidental resetting of the thermal interruption device, the appliance should not be powered by an external switching device, such as a timer, or be connected to a circuit that is regularly switched on and off.
-
Children under 8 should be kept at a safe distance from the appliance if not continuously supervised.
-
Children should not play with the appliance.
-
The appliance can be used by those aged 8 or over and by those with limited physical, sensorial or mental capacities, without experience or knowledge of the product, only if supervised or provided with instruction as to the operation of the appliance, in a safe way with awareness of the possible risks.
-
Cleaning and maintenance should not be carried out by unsupervised children.
-
Do not use rough or abrasive materials or sharp metal scrapers to clean the oven door glasses, as they can scratch the surface and cause the glass to shatter.
-
The oven must be switched off before removing the removable parts. After cleaning, reassemble them according the instructions.
-
Only use the meat probe recommended for this oven.
-
Do not use a steam cleaner or high pressure spray for cleaning operations.
-
IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITHOUT PLUG:
-
HE APPLIANCE MUST NOT BE CONNECTED TO THE POWER SOURCE USING PLUG OR SOCKETS, BUT MUST BE DIRECTLY CONNECTED TO THE SUPPLY MAINS. The connection to the power source must be carried out by a suitably qualified professional. In order to have an installation compliant to the current safety legislation the oven must be connected only placing an omnipolar breaker, with contact separation compliant to the requirements for overvoltage category III, between the appliance and the power source. The omnipolar breaker must bear the maximum connected load and must be in line with current legislation. The yellow-green earth cable should not be interrupted by the breaker. The omnipolar breaker used for the connection must be easily accessible when the appliance is installed. The connection to the power source must be carried out by a suitably qualified professional considering the polarity of the oven and of the power source. The disconnection must be achieved incorporating a switch in the fixed wiring in accordance with the wiring rules
-
IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITH PLUG:
The socket must be suitable for the load indicated on the tag and must have ground contact connected and in operation. The earth conductor is yellow-green in colour. This operation should be carried out by a suitably qualified professional. ln case of in- compatibility between the socket and the appliance plug, ask a qualified electrician to substitute the socket with another suitable type. The plug and the socket must be conformed to the current norms of the installation country. Connection to the power source can also be made by placing an omnipolar breaker, with contact separation compliant to the requirements for overvoltage category III, between the appliance and the power source that can bear the maximum connected load and that is in line with current legislation. The yellow-green earth cable should not be interrupted by the breaker. The socket or omnipolar breaker used for the connection should be easily accessible when the appliance is installed. The disconnection may be achieved by having the plug accessible or by incorporating a switch in the fixed wiring in accordance with the wiring rules. -
lf the power cable is damaged, it should be substituted with a cable or special bundle available from the manufacturer or by contacting the customer service department. The type of power cable must be H05V2V2-F.
-
This operation should be carried out by a suitably qualified professional. The earth conductor (yellow-green) must be approximately 10 mm longer than the other conductors. For any repairs, refer only to the Customer Care Department and request the use of original spare parts.
-
Failure to comply with the above can compromise the safety of the appliance and invalidate the guarantee.
-
Any excess of spilled material should be removed before cleaning.
-
A long power supply failure during an occurring cooking phase may cause a malfunction of the monitor. ln this case contact customer service.
-
The appliance must not be installed behind a decorative door in order to avoid overheating.
-
When you place the shelf inside, make sure that the stop is di- rected upwards and in the back of the cavity. The shelf must be inserted completely into the cavity.
-
When inserting the grid tray pay attention that the anti-slide edge is positioned rearwards and upwards.
-
WARNING: Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium foil or any other protection, in direct contact with the hot enamel, risk melting and deteriorating the enamel of the insides. • WARNING: Never remove the oven door seal.
-
CAUTION: Do not refill the cavity bottom with water during cooking or when the oven is hot.
-
No additional operation/setting is required in order to operate the appliance at the rated frequencies.
-
The oven can be located high in a column or under a worktop. Before fixing, you must ensure good ventilation in the oven space to allow proper circulation of the fresh air required for cooling and protecting the internal parts. Make the openings specified on last page according to the type of fitting.
-
For a correct use of the oven it is advisable not to put the food in direct contact with the racks and trays, but to use oven papers and/ or special containers.
-
WARNING: before initiating the automatic cleaning cycle:
– Clean the oven door; – Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use detergents;
– Remove all accessories and the sliding rack kit (where present); -Do not place tea towels. -
ln ovens with meat probe it is necessary, before making the cleaning cycle, close the hole with the nut provided. Always close the hole with the nut when the meat probe is not used.
-
During the pyrolytic cleaning process, surfaces can heat up more than usual, children must therefore be kept at a safe distance.
-
If a hob has been fitted above the oven, never use the hob while the Pyrolizer is working, this will prevent the hob from overheating.
General Instructions
We thank you for choosing one of our products. For the best results with your
oven, you should read this manual carefully and retain it for future
reference. Before installing the oven, take note of the serial number so that
you can give it to customer service staff if any repairs are required.
Having removed the oven from its packaging, check that it has not been damaged
during trans- portation. If you have doubts, do not use the oven and refer to
a qualified technician for advice.
Keep all of the packaging material (plastic bags, polystyrene, nails) out of
the reach of children.
When the oven is switched on for the first time, strong smelling smoke can
develop, which is caused by the glue on the insulation panels surrounding the
oven heating for the first time. This is absolutely normal and, if it occurs,
you should wait for the smoke to dissipate before putting food in the oven.
The manufacturer accepts no responsibility in cases where the instructions
contained in this document are not observed.
NOTE: the oven functions, properties and accessories cited in this manual
will vary, depending on the model you have purchased.
Safety Indications
Only use the oven for its intended purpose, that is only for the cooking of
foods; any other use, for example as a heat source, is considered improper and
therefore dangerous. The manufacturer cannot be held responsible for any
damage resulting from improper, incorrect or unreasonable usage.
The use of any electrical appliance implies the observance of some fundamental
rules:
- do not pull on the power cable to disconnect the plug from the socket;
- do not touch the appliance with wet or damp hands or feet;
- in general the use of adaptors, multiple sockets and extension cables is not recommended;
- in case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.
Electrical Safety
ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL
CONNECTIONS. The power supply to which the oven is connected must conform
with the laws in force in the country of installation. The manufacturer
accepts no responsibility for any damage caused by the failure to observe
these instructions. The oven must be connected to an electrical supply with an
earthed wall outlet or a disconnector with multiple poles, depending on the
laws in force in the country of installation. The electrical supply should be
protected with suitable fuses and the cables used must have a transverse
section that can ensure correct sup- ply to the oven.
CONNECTION
The oven is supplied with a power cable that should only be connected to an
electrical supply with 220-240 Vac power between the phases or between the
phase and neutral. Before the oven is connected to the electrical supply, it
is important to check:
- power voltage indicated on the gauge;
- the setting of the disconnector.
The grounding wire connected to the oven’s earth terminal must be connected to
the earth terminal of the power supply.
WARNING
Before connecting the oven to the power supply, ask a qualified electrician to
check the conti- nuity of the power supply’s earth terminal. The manufacturer
accepts no responsibility for any accidents or other problems caused by
failure to connect the oven to the earth terminal or by an earth connection
that has defective continuity.
NOTE: as the oven could require maintenance work, it is advisable to keep
another wall socket available so that the oven can be connected to this if it
is removed from the space in which it is installed. The power cable must only
be substituted by technical service staff or by technicians with equivalent
qualifications.
A low light around the central main switch could be present when the oven is
off. This is a normal behavior. I can be removed just turning the plug upside
down or swapping the supply terminals.
Recommendations
After each use of the oven, a minimum of cleaning will help keep the oven
perfectly clean. Do not line the oven walls with aluminium foil or single-use
protection available from stores. Aluminium foil or any other protection, in
direct contact with the hot enamel, risks melting and deteriorating the enamel
of the insides. In order to prevent excessive dirtying of your oven and the
resulting strong smokey smells, we recommend not using the oven at very high
temperature. It is better to extend the cooking time and lower the temperature
a little. In addition to the accessories supplied with the oven, we advise you
only use dishes and baking moulds resistant to very high temperatures.
Installation
The manufacturers have no obligation to carry this out. If the assistance of
the manufacturer is required to rectify faults arising from incorrect
installation, this assistance is not covered by the guarantee. The
installation instructions for professionally qualified personnel must be
followed. Incorrect installation may cause harm or injury to people, animals
or belongings. The manufacturer cannot be held responsible for such harm or
injury. The oven can be located high in a column or under a worktop. Before
fixing, you must ensure good ventilation in the oven space to allow proper
circulation of the fresh air required for cooling and protecting the internal
parts. Make the openings specified on last page according to the type of
fitting.
Product description
- Control panel
- Shelf positions (lateral wire grid if included)
- Grids
- Trays
- Fan (if present)
- Oven door
- Lateral wire grids (if present: only for flat cavity)
- Serial number
ACCESSORIES
Drip tray Collects residues that drip when cooking food on the grills.
Metal grid Holds baking trays and plates.
Lateral wire grids (only if present) First Use
PRELIMINARY CLEANING; Clean the oven before using for the first time. Wipe
over external surfaces with a damp soft cloth. Wash all accessories and wipe
inside the oven with a solution of hot water and washing up liquid. Set the
empty oven to the maximum temperature and leave on for about 1 hour, this
will remove any lingering smells of newness.
Display description
- Function selector knob
- Cooking Time
- Wifi signal lamp
- Minute minder
- Clock setting
- Temperature or clock display
- LCD / Temperature adjustment controls
- Cooking function selector knob
WARNING : the first operation to carry out after the oven has been
installed or following the interruption of power supply (this is recognizable
the display pulsating and showing 12:00 ) is setting the correct time. The
bottom right LED flashes at the same time
( ). This is achieved as follows.
- Set time with “-” “+” buttons.
- Push the Menu button or wait 5 seconds than the clock is setted.
ATTENTION: The oven will only operate setting the clock
FUNCTION| HOW TO ACTIVATE| HOW TO DEACTIVATE| WHAT IT
DOES| WHY IT IS NEEDED
---|---|---|---|---
SILENCE MODE| Rotate the left function selector to the position “Silence
mode”| Rotate the function selector to the position OFF.| Enables you to turn
off the sound of the minute minder.| To turn off the sound of the minute
minder
SET THE TIME| Rotate the left function selector to the position “Setthe time”.
Use the buttons ” + ” or – “to set the time| Rotate the function selector to
the position OFF.| Enables you to set the time which appears on the display|
To set the time
NB: Set the time when you first install your oven or just after a black out
(the clock is showing a pulsating 12.00)
COOKING DURATION| Turn the right function selector to a cooking function
Rotate the left function selector to the position “Cooking Time Du- ration”
Set the time of cooking by using buttons ” + ” and ” – ”
Lighting Auto appears| When the cooking time has elapsed, the oven switch off
automatically and the alarm rings for few seconds To stop the cooking
functions early,
turn the function control to OFF or set the time on 00.00; by rotating the
function selector to Cooking Time Duration and by using the buttons ” + ” and
” – “| It allows to preset thecooking time required for the recipe chosen.
When the cooking time is
set, turn the function
selector toOFF to go back to actual time.
To view the cooking time selected, turn the left function selector to Cooking
Time duration.| For cooking the desired recipes.
END OF COOKING| Turn the right function selector to a cooking function
Rotate the left function selector to the position “End of cooking”
Set the end time of cooking by using but- tons ” + ” and ” – ”
Lighting Auto appears| When the cooking time has elapsed, the oven switch off
automatically.
To stop the cooking functions early, turn the function control to OFF| It
allows to preset the end of cooking time you want.
When the cooking time is set, turn the function selector to OFF to go back to
actual time.
To view the cooking time selected, turn the left function selector to End of
cooking Time
NOTE: Delayed cooking feature is not available for following cooking modes:
Fan Grill & Grill| This function is normally used with the COOKING DURATION
function
For example, the desired food needs to cook for 45 minutes and I want it to be
ready for 12.30; in this case: at the end of the set time, the oven
automatically switches off and an alarm sounds. Select the desired cooking
function. Set the cooking duration to 45 minutes (“-” “+”).
Set the end of cooking to 12:30
(“J. “+”). Cooking will automatically begin at 11:45 (12:30 minus 45 minotes),
at the end of the set cooking time, the oven will automatically switch off
WARNING: by setting only the end of cooking time, and not the cooking
duration, the oven will im-
mediately switch on and switch off at the end of the set cooking time.
MINUTE MINDER| Turn the left function selector to the position Minute Minder.
Set the time of cooking by using buttons “+”and “-“| Setthe time on 00.00 by
turning the left function
selector to the position Minute Minder, and using
the button ” – “| Emits an audible signal at the end of a set time.
During operation, the display shows the remaining time.| Allow to use the oven
as alarm even if the oven is switch off
CHILD SAFETY LOCK
| Turn the left function selector to the position Child lock.
Press the button ” + ” during 7 seconds
Child lock is available when ” STOP ” appears on display| Turn back the left
function selector to Child lock and press button ” + ” during 7 seconds.
Indication STOP disappears.| The oven cannot be used.| This function is useful
when there are children in the house.
Cooking Modes
Symbol | T °C default | T °C range | Function |
---|---|---|---|
LAMP: Turns on the oven light. | |||
DEFROST: When the dial is set to this position. The fan circulates air |
at room temperature around the frozen food so that it defrosts in a few
minuteswithout the protein content of the food being changed or altered.
| 210
180| 5C ÷ 240| MULTI-LEVEL: We recommend you use this method for poultry,
pastries, fish and vegetables. Heat penetrates into the food better and both
the cooking and preheating times are reduced. You can cook different foods at
the same time with or without the same preparation in one or more positions.
This cooking method gives even heat distribution and the smells are not
mixed.Allow about ten minutes extra when cooking foods at the same time.
| 220| 50 ÷ 280| CONVENTIONAL: Both top and bottom heating elements are used.
Preheat the oven for about ten minutes. This method is ideal for all
traditional roasting and ba king. For seizing red meats, roast beef, leg of
lamb, game, bread, foil wrapped food ( pap illotes), flaky pastry. Place the
food and its dish on a shelf in mid position.
| 180| 50 ÷ 240| BOTTOM HEATING + FAN: The bottom heating element is used with
the fan circulating the air inside the oven. This method is ideal for juicy
fruitflans, tarts, quiches and paten prevents food from drying and encourages
rising in cakes, bread dough and other bottom-cooked food.Place the shelf in
the bottom position.
| 200| 150 ÷ 220| COOK LIGHT: This function allows to cook in a healthier
way, by reducing the amount of fat or oil required. The combination of heating
elements with a pulsating cycle of air ensures a perfect baking result.
| L3| Ll ÷ L5| GRILL: use the grill with the door closed.
The top heating element is used alone and you can adjust the temperature. Five
minutes preheating is required to rt the elements red-hot. Success is
guaranteed for grills, kebabs and gratin dishes. White meats should be put at
a distance from the grill; the cooking time is longer, but the meat will be
tastier. You can put red meats and fish fillets on the shelf with the drip
tray underneath.
| ECO| ECO ÷ SUPER| PYROLYSIS
| | | WIF I ON: Oven allows wifi connection.
| | | WIFI RESET : It allows wifi connection to be restarted.
- Tested in accordance with the EN 60350-1 for the purpose of energy consumption declaration and energy class.
General notes on cleaning
The lifecycle of the appliance can be extended through regular cleaning. Wait
for the oven to cool before carrying out manual cleaning operations.
Never use abrasive detergents, steel wool or sharp objects for cleaning, so as
to not irreparably damage the enamelled parts. Use only water, soap or bleach-
based detergents (ammonia).
GLASS PARTS
It is advisable to clean the glass window with absorbent kitchen towel after
every use of the oven. To remove more obstinate stains, you can use a
detergent-soaked sponge, well wrung out, and then rinse with water.
OVEN WINDOW SEAL
If dirty, the seal can be cleaned with a slightly damp sponge.
ACCESSORIES
Clean accessories with a wet, soapy sponge before rinsing and drying them:
avoid using abrasive detergents.
DRIP PAN
After using the grill, remove the pan from the oven. Pour the hot fat into a
container and wash the pan in hot water, using a sponge and washing-up liquid.
If greasy residues remain, immerse the pan in water and detergent.
Alternatively, you can wash the pan in the dishwasher or use a commercial oven
detergent. Never put a dirty pan back into the oven.
Maintenance
REMOVAL AND CLEANING OF THE SIDE RACKS
- Remove the wire racks by pulling them in the direction of the arrows (see below)
- To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are dried afterwards.
- After the cleaning process install the wire racks in reverse order.”
CHANGING THE BULB
- Disconnect the oven from the mains supply.
- Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
- Once the defective bulb is replaced, replace the glass cover.
This product contains one or more light sources of energy efficiency class G (Lamp) /F (10 Led).
Pyrolysis
The oven is equipped with a pyrolyser cleaning system, which destroys food
residues at high temperature. The operation is carried out au- tomatically by
means of the programmer. The resulting fumes are rendered “clean” by passing
over a Pyrolyser wich starts as soon as cooking begins. As very high
temperatures are required by the Pyrolyser, the oven door is fitted with a
safety lock. The pyrolyser can be stopped at any time. The door cannot be
opened until the safety lock is displayed.
NOTE : If a hob has been fitted above the oven, never use the gas burners
or the electric hot-plates while the Pyrolyser is working, this will prevent
the hob from overheating.
TWO PYROLYTIC CYCLE are pre-set:
ECO PYROCLEAN : Cleans a moderately stained oven. Operates for a period
of 90 minutes.
SUPER PYROCLEAN : Cleans a heavily stained oven. Operates for a period of
120 minutes. Never use commercially available cleaning products on a Pyrolytic
oven!
Tip : Carrying out Pyrolytic cleaning immediately after cooking allows
you to take advantage of residual heat, thus saving energy.
Before executing a pyrolytic cycle:
-
Remove all the accessories from the oven because they are not able to tolerate the high temperatures used during the pyrolytic cleaning cycle ; in particular removing grids, side racks and the telescopic guides (refer to the chapter REMOVING GRIDS AND SIDE RACKS) . In ovens with meat probe it is necessary, before making the cleaning cycle , close the hole with the nut provided.
-
emove any large spillages or stains as it would take too long to destroy them. Also excessively large amounts of grease could ignite when subject to the very high temperatures of the Pyrolytic cycle.
-
Close the oven door.
-
Excess spillage must be removed before cleaning. • Clean the oven door;
-
Remove large or coarse food residues from
-
the inside of the oven using a damp sponge.
Do not use detergents; -
Remove all accessories and the sliding rack kit (where present);
-
Do not place tea towels.
Using the pyrolitic cycle:
- Rotate the function selector to the position “ “. On the display, appears the indication “ ECO “ or “ SUP “. The preset time is 90 min, this can be varied from 90 min (Eco mode) to 120 min (Sup mode) via the programmer (setting button “ + “ or “ – “). If the oven is very dirty, it is recommend o increase the time to 120 min, if the oven is moderately dirty reduce the cleaning cycle time to 90 min.
- It is possible to defer the start time of the pyroclean cycle by changing the END time via the programmer.
- After few minutes, when the oven reaches a high temperature, the door locks automatically. The pyroclean cycle can be stopped at any time by turning the function selector back to ‘0’ (the word OFF will be displayed for 3 seconds).
- Once the pyroclean cycle is finished, the pyrolysis will switch off automatically. On the display appears the indication “END” until the door is locked then “0–n”.
- You can turn the function selector back to “ 0 “ but if the temperaure is still high, the “0–n “ indication appears to inform that the door is locked.
Use of the pyrolytic cycle in Touch Control ovens:
- Rotate the function selector into position pyrolisys. The display will show either “ECO” or “SUP“
- The pre-set time is90 minutes but it can be varied from 90 min. (Eco mode) to 120 min. (Sup mode) using the programmer (“ +” or “-” key). If the oven is very dirty, the time should be increased to 120 min., while if the oven is only a slightly dirty, reduce the cleaning cycle to 90 min.
Aquactiva Function
The Aquactiva procedure uses steam to help remove remaining fat and food
particles from the oven.
- Pour 300 ml of water into the Aquactiva container at the bottom of the oven.
- Set the oven function to Static ( )or Bottom ( )heater
- Set the temperature to the Aquactiva icon
- Allow the program to operate for 30 minutes.
- After 30 minutes switch off the program and allow the oven to cool down.
- When the appliance is cool, clean the inner surfaces of the oven with a cloth.
Warning: Make sure that the appliance is cool before you touch it.
Care must be taken with all hot surfaces as there is a risk of burns.
Use distilled or drinkable water.
Waste management and environmental protection
This appliance is labelled in accordance with European Directive 2012/19/EU regarding electric and electronic appli- ances (WEEE). The WEEE contain both polluting substances (that can have a negative ef- fect on the environment) and base elements (that can be reused). It is important that the WEEE undergo specific treatments to correctly remove and dispose of the pollutants and recover all the materials. Individuals can play an important role in ensuring that the WEEE do not become an environmental problem; it is essential to follow a few basic rules:
- the WEEE should not be treated as domestic waste;
- the WEEE should be taken to dedicated collection areas managed by the town council or a registered company.
In many countries, domestic collections may be available for large WEEEs. When you buy a new appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as long as the appliance is of an equivalent type and has the same functions as the purchased appliance.
SAVING AND RESPECTING THE ENVIRONMENT
Where possible, avoid pre-heating the oven and always try to fill it. Open the
oven door as infrequently as possible, because heat from the cavity disperses
every time it is opened.
For a significant energy saving, switch off the oven between 5 and 10 minutes
before the planned end of the cooking time, and use the residual heat that the
oven continues to generate. Keep the seals clean and in order, to avoid any
heat dispersal outside of the cavity.
If you have an electric contract with an hourly tariff, the “delayed cooking”
programme makes energy saving more simple, moving the cooking process to start
at the reduced tariff time slot.
Troubleshooting
Problem | Possible cause | Solution |
---|---|---|
the oven does not heat up | The clock is not set | Set the clock |
The oven does not heat up | A cooking function and temperature has not been | |
set | Ensure that the necessary settings are correct | |
No reaction of the touch user interface | Steam and condensation on the user | |
in terface panel | Clean with a microfiber cloth the interface panel to remove |
the condensation layer
Installation
INSTALLATION 122
If the furniture is equpped with a bottom at the back part, provide an opening for the power supply cable.
If the mounting of the plinth does not allow air circulation, to obtain the maximum performance of the oven it is necessary to create an opening of 500x10mm or the same surface in5.000 mm2
If the oven does not have a cooling fan, create an opening 460 mm x 15 mm
The manufacturer will not be responsible for any inaccuracy resulting from printing or transcript errors contained in this brochure. We reserve the right to carry out modifications to products as required, including the interests of consumption, without prejudice to the characteristics relating to safety or function.
70014819