LAMAX Clips1 Earbuds User Guide
- June 4, 2024
- LAMAX
Table of Contents
Clips1
User Guide
Controls
| Switch on | Hold down the multifunction button for 3 seconds |
|---|---|
| Switch off | Hold down the multifunction button for 5 seconds in an unpaired |
state
Play / Pause| Tap the multifunction button
Next song| Double tap the multifunction button on the right earphone
Previous song| Double tap the multifunction button on the left earphone
Volume up| Hold down the multifunction button on the right earphone for 2
seconds
Volume down| Hold down the multifunction button on the left earphone for 2
seconds
Answer call| Tap the multifunction button
End call| Hold down the multifunction button for 1 second
Reject a call| Hold down the multifunction button for 2 seconds
Activate mobile assistant| Triple tap the multifunction button on the left
earphone
Music / Game mode| Triple tap the multifunction button on the right earphone
Switching On
The earphones automatically switch on when removed from the charging station.
To switch it on manually, hold down the multifunction button for 3 seconds.
When switching on manually, both earphones need to be turned on separately. An
audible notification sounds when switched on.
Switching off
The earphones automatically switch off when inserted into the charging
station. To turn it off manually, unplug the earphones from the device and
hold the multifunction button for 5 seconds on one of the earphones. An
audible notification will sound when switching off.
Pairing
- Remove the earphones from the charging station. The earphones will automatically connect to each other. The right earphone acts as the master and is ready for pairing as indicated by the alternate flashing of white and green LEDs. The left earphone flashes green at longer intervals.
- Switch on Bluetooth on your device and search for LAMAX Clips1 in the list of available Bluetooth devices. After successful pairing, an audio notification will sound. The LED in both earphones flashes white at longer intervals.
If you have problems pairing, take the earphones out of the charging station and remove them from the list of paired devices on your phone. Then insert them into the charging station and pair them as described in step 1.
Charging
To charge the charging station, plug the cable into the USB-C port on the
bottom of the charging station and plug the other end of the cable into a USB
power supply with a maximum voltage of 5V.
The LED will flash red while charging. When fully charged, it will glow red.
To charge the earphones, place them in a charged charging station.
When charging, the LEDs on the earphones and on the charging station are
green. When fully charged, the LEDs will turn off.
Parameters
| Wireless technology | Bluetooth 5.1 |
|---|---|
| Max. pairing distance | up to 10 meters |
| Supported codecs | AAC, SBC |
| Earphone battery capacity | 45 mAh |
| Charging station battery capacity | 500 mAh |
| Charging time of earphones | approx. 1 hour |
| Playback time | up to 8 hours |
| Weight of one earphone | 6 g |
| Weight including charging station | 43 g |
Subject to printing errors.
The latest version of the user guide can be downloaded here:
https://lamax-
electronics.com/clips1/manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>