FRICOSMOS 464254 Stainless Steel Electronic Bottle Filler Tap Instructions
- June 13, 2024
- FRICOSMOS
Table of Contents
FRICOSMOS 464254 Stainless Steel Electronic Bottle Filler Tap
Product Information
- Product Name: Sensor Tap
- Model Number: Ref: 464254
- Manufacturer: Fricosmos
- Website: www.fricosmos.com
- Email: info@fricosmos.com
- Phone: (+34) 902 304 420
- Fax: (+34) 902 636 683
- Skype User: fricosmos
Product Usage Instructions
- To open the tap, approach your hand close to the sensor without touching it.
- The maximum distance between your hand and the sensor should be 180mm.
- The tap will stop flowing water only when you remove your hand after 6 seconds.
- If you need to adjust the sensor, follow these steps:
- Remove the batteries from the sensor.
- Wait for 1 minute.
- Insert the batteries back into the sensor.
- The LED on the sensor will blink in red.
- Place your hands 40mm to 60mm away from the sensor until the blinking stops.
INSTALLATION
This device must be installed by an authorized electrician. Make sure the working pressure is between 1 bar and 5 bar The room temperature must be between 5ºC and 55ºC Make sure no sunlight shines on the sensor. Make sure the water stopcock is closed. Connect the flexible hose to the adapter and tighten it firmly. Insert the hoses through the hole in the countertop. For their installation, it is necessary to drill a 21mm hole Secure the faucet to the countertop with the nut underneath the countertop. Connect the faucet sensor cable to the control box. Remove the battery compartment cover and insert the four AA batteries according to the indicated polarity.
USE
Sensor adjustment
Remove the batteries Wait 1 minute and insert them back. The LED will blink in
red. Place your hands 40mm to 60mm away from the sensor until the blinking
stops
Product Specifications
- Length (L): 102mm
- Height (H): 231mm
- Depth (D): 307mm
- Connection Size: 1/2 inch
- Weight: 310g
Read the instructions before connecting the device and store them in a safe place for reference.
CLEANING
- Clean the equipment regularly. Before any cleaning.
- Use only mild soap and water to clean.
- Wipe with a soft cloth.
- Dry with a soft cloth. The equipment must be completely dry before installing the current.
- Do not use acids or harsh detergents or scrub with scouring pads, spatulas, knives, or sharp objects.
WARRANTY
This device has two years of warranty. An improper use voids the warranty of the unit. Batteries are excluded.
CARACTERISTIQUES TECHNIQUES
L H h D g.
102mm 231mm 307mm 1/2” 310g
- Temperature range 5ºC – 55ºC
- Working pressure 1 – 5 bar
- Maximum reading distance 180mm
References
- FRICOSMOS - Professional stainless steel furniture for food trade equipment at the best prices on the market
- Material para Hostelería y Comercio - Productos y Maquinaria
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>