FRICOSMOS Lavamanos Mural Rodilla Instruction Manual
- June 1, 2024
- FRICOSMOS
Table of Contents
FRICOSMOS Lavamanos Mural Rodilla
REF: 061202
CONTENTS & AVAILABLE SPARES
- Sheathing for wall washbasin.
- 461008 – Turning tap 160x180x1 (50mm nut).
- 461202 – H-H 1/2” (400mm) fl exible hose with stainless steel mesh.
- 461206 – H-H 1/2” (600mm) fl exible hose with stainless steel mesh.
- 460410 – Push button timer valve M-M 1/2”
- 461606 – 1/2” M-M-M non-return mixer.
- 461802 – 1/2” M-H 90° knee.
- 454202 – 2 1/2” valve with trough for 500mm sink.
- 409822 – Plastic nylon Fisher 6x30mm peg.
- 421038 – Self-tapping screw 4,8x22mm.
CLEANING AND STERILIZATION
- Use only water and neutral soap when cleaning.
- Wipe with a soft cloth.
- Rinse with plenty of drinking water.
- Dry with a soft cloth.
- Do not use acids or strong detergents and do not rub with a scourer or spatula.
SAFETY
- Read the instructions before connecting the device and store them in a safe place for reference.
- When cleaning, be extra careful with corners.
ASSEMBLY
- Check the contents.
- Avoid dirt in pipes and in the area before assembly.
- If the plumbing is new, let the water flow.
- When assembling, it is advisable to use special gloves not to get cuts on hands.
- Use teffl on to seal connexions.
- Connect the 400 mm hose to the non-return mixer outlet, and to the push button inlet (see the indicator arrow on the back the push button) Fig. 1
- Connect the water inlet hoses (not included) to the non-return mixer inlets.
- Connect the supplied mixed water flexible hose to the outlet of the push button (see the arrow point on the push button to check the incoming fl ow) · Fig. 1
- Introduce the pipe in the upper orifice and fix it the attached bolts · Fig. 2
- Introduce the push button in the orifice from the inside of the case and fix it with its bolt from the outside.
- Connect the free end of the mixed water flex hose to the output.
- Assemble the discharge valve · Fig. 3
- For a total recommended height of 850mm make two holes on the wall with a 8mm drill at a 825mm height. These holes must have a separation of 298mm.
- Fix the washbasin on the wall · Fig. 4
- You can now connect the water input and the discharge to the washbasin.
- Turn the non-return mixer head to adjust the temperature as desired
USE
To open the water keep the button pressed with the knee or thigh.
Temperature can be adjusted with the non-return mixer handle.
Fricosmos, S.A.
Polígono industrial nº 1, C/ Cámara de la Industria 11A
28938 Móstoles (Madrid) – España
www.fricosmos.com
info@fricosmos.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>