FRICOSMOS 042802 Anisakis Detector User Manual

FRICOSMOS 042802 Anisakis Detector

Product Information

The device described in this user manual is a parasite detection system designed to detect the presence of anisakis, a parasite that can be found in the intestine of some fishes. Anisakis can cause allergies and digestive disorders. The detection system uses a non-destructive method by lighting the fish from the bottom with a source of white light to find the parasite. This method ensures that the fish does not suffer any damage or deterioration. It is important to note that this device is intended only for the detection of the parasite and does not eliminate or inactivate it.

The device requires connection to an electrical network compatible with the specifications mentioned in the Technical Characteristics section. It operates on a power supply of 220-240v and 50-60Hz with a power consumption of 40w. The device has IP65* protection rating, indicating its resistance to dust and water.

The dimensions of the device are as follows:

• Length (L): 400mm
• Width (A): 248mm
• Height (H): 155mm
• Weight: 2.96kg

*IP65: The device is protected against dust ingress and low-pressure water jets from any direction.

Product Usage Instructions

1. Connect the device to an electrical network compatible with the specifications mentioned in the Technical Characteristics section.
2. Turn on the device using the on/off switch.
3. Place the skinless fish on the surface of the light bulb area of the device.
4. If the fish is infected with anisakis, you will easily see it thanks to the transillumination. Anisakis is a small worm about 2cm long.

Disposal Instructions

Do not dispose of this product as unsorted waste at your municipality. The disposal must be collected separately for special treatment. This product must not be disposed of with household waste. It must be disposed of in an authorized place specially designated for the recycling of electrical and electronic equipment.

Cleaning and Maintenance Instructions

Clean the equipment regularly using a damp cloth. Do not use wet cloth with soap. Avoid using acids or harsh detergents, and do not scrub with scouring pads, spatulas, knives, or sharp objects.

Bulb Replacement Instructions

1. Unplug the device from the power supply.
2. Remove the screws that secure the transparent casing.
3. Detach the transparent casing from the main body.
4. Change the bulb.
5. Screw the transparent casing back onto the main body.

PRINCIPIO DE DETECCIÓN

Anisakis is a parasite that can be found in the intestine of some fi shes and can cause allergies and digestive disorders. The detection system used in this device consists of lighting the fi sh from the bottom with a source of white light to fi nd the parasite. It is a non-destructive detection method so the fi sh does not suff er any damage or deterioration Important: This device is intended only for the detection of the parasite and in no case eliminates it or inactivates it

USE

Connect the device to an electrical network compatible with the specifi cations in the “Technical characteristics” section. Turn on the device using the on / off switch. Place the skinless fi sh on the surface of the light bulb area of the device If the fi sh is infected with anisakis you will easily see it thanks to the transillumination. Anisakis is a small worm about 2cm long

Read these operating instructions carefully before installing and using the heater!

CARACTERISTIQUES TECHNIQUES TECHNICAL

Cover made of food safe polyethylene PETG

• Device hermetic to dust and protected against projected water

GARANTIE

This device has two years of warranty. An improper use void the warranty of the unit.

SYMBOLS

Read carefully these instructions before use.
Indoor use only.

DISPOSAL: Do not dispose of this product as unsorted waste at your municipality. The disposal must be collected separately for a special treatment. This product must not be disposed of with household waste. It must be disposed of in an authorized place specially for the recycling of electrical and electronic equipment.

CLEANING AND MAINTENANCE

• Clean the equipment regularly.
• Use a damp, not wet with soap.
• Do not use acids or harsh detergents or scrub with scouring pads, spatulas, knives or sharp objects.

BOMBILLA

1. Unplug the device from the power supply
2. Remove the screws that secure the transparent casing.
3. Detach the transparent casing from the main body
4. Change the bulb
5. Screw again the transparent casing on the main body

Fricosmos, S.A.
Polígono industrial nº 1, C
, 11A 28938 Móstoles (Madrid)
España
Tel. (+34) 902 304 420
Fax. (+34) 902 636 683
www.fricosmos.com
info@fricosmos.com
Skype user: fricosmos

References

• FRICOSMOS - Professional stainless steel furniture for food trade equipment at the best prices on the market

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>