Marshall 972MINOR3 Minor III True Wireless Headphones User Manual

June 13, 2024
Marshall

Marshall 972MINOR3 Minor III True Wireless Headphones

PRODUCT OVERVIEW

GETTING STARTED

  1. Open the charging case.
  2. Press and hold the button on the bottom of the case until the LED turns to a slow blue pulse.
  3. Select MINOR III from your sound device’s Bluetooth® list.

TOUCH CONTROLS

Touch the left or right earbud to control your music and phone calls.

  • 1 touch to play/pause or receive/end a call
  • 2 touches to skip forward or reject a call
  • 3 touches to skip backward

CHARGING THE EARBUDS

Put your earbuds back in the case and close the lid to turn them off and begin charging.

CHARGING THE CASE

Use a wireless charger or plug the case into a USB power source to charge it. The case is fully charged when the front-facing LED is steady green. To charge the case using a wireless charger, follow the instructions below.

  1. Place the charging case with its back flat against the wireless charging pad.
  2. Make sure that the front LED lights up to indicate that the case is charging.
  3. Once the LED light has turned steady green the case is fully charged.

LED INDICATOR

The LED shows the case battery charge, from red through yellow to green (0–100%). It pulses blue while in Bluetooth pairing mode.

PAIRING A NEW DEVICE

Minor III remembers up to 6 previously paired devices and will try to reconnect with the last connected device.

  1. Place the earbuds in the case and keep the lid open.
  2. Press and hold the button on the bottom of the case until the LED turns to a slow blue pulse.
  3. Select MINOR III from your sound device’s Bluetooth list.
    Note: Minor III can be connected with one sound device at a time. Make sure to disconnect from the current device before reconnecting with a different device.

RESETTING THE EARBUDS

If your earbuds become erratic or unresponsive, follow the instructions below.

  1. Place the earbuds in the case and close the lid to restart the earbuds.
    If the problem persists, perform a factory reset.

Note: This will delete all user settings and the earbuds will need to be paired again.

  1. Place the earbuds in the case and keep the lid open.
  2. Press and hold the Bluetooth pairing button for 10 seconds, until the LED turns purple, to reset the earbuds to factory settings.
  3. Remove MINOR III from your sound device’s Bluetooth list before pairing again.

If the problem persists, perform a hardware reset.

Note: This will delete all user settings and the earbuds will need to be paired again.

  1. Place the earbuds in the case and keep the lid open.
  2. Press and hold the Bluetooth pairing button for 15 seconds to reset the earbuds.
  3. Remove MINOR III from your sound device’s Bluetooth list before pairing again.

CLEANING YOUR MINOR III

Earbuds come in close contact with your skin often and sometimes for long periods of time. This will over time cause build-up of dirt and grease that can affect performance and may cause skin irritation. Clean your earbuds regularly to keep them fresh and make them last longer. Unplug any cables before cleaning the case. Make sure everything is completely dry before using the earbuds, putting the earbuds back in the case, or plugging in a USB charger.
Use a disinfectant wipe or a lint-free cloth, slightly damp with 70% isopropyl alcohol or 75% ethyl alcohol to gently clean the exterior surfaces of the earbuds and the case. Avoid getting moisture in any openings or in the speaker mesh. Carefully clean those areas with a dry and soft brush, or a cotton swab.

  • Do not use any sharp objects.
  • Do not use compressed air.
  • Do not use products containing bleach or hydrogen peroxide.
  • Do not submerge the earbuds in any cleaning agents

The Bluetooth® wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Zound Industries International AB is under license.
R2.4

IMPORTANT SAFETY INSTRUCTIONS

 Not suitable for children under age three Contains small parts, which may be a choking hazard
Long-term exposure to loud music a sounds may cause hearing loss. To prevent possi)le hearing damage, do not listen at high volume levels for long periods.
Electrical products, cables, batteries, packaging, and the manual, should not be mixed with general household waste. For proper recycling, please take these products to a designated collection point where they will be accepted free of charge or return them to your local retailer. Correct product disposal saves resources and prevents negative effects on human health and the environment

To prevent possible harm to the environment or human health from uncontrolled waste disposal, dispose or defective rechargeable battery at special collection points or return them to your specialist dealer

WARNINGS

  • Set your sound source to low volume before using the headphones.
  • Do not use these headphones when operating a motor vehicle, a bicycle, machinery or where your inability to hear outside sounds may present a danger to you or others.
  • Using these headphones limits your ability to hear noises around you, regardless of listening volume.
  • Keep away from fire, water, and high voltage equipment.
  • Do not modify. disassemble, open, drop, crush. puncture, or shred these headphones.
  • Do not heat above 113°F (45 °C).
  • Do not short-circuit the internal battery or its cells.
  • In the event of cell leakage, do not allow the liquid to come in contact with the skin or the eyes.
  • The internal battery is not end-user replaceable.
  • Only use the included charging case with the Minor Ill earbuds.

DISCLAIMER

Stated play time is calculated using a random selection of music. played at medium volume.
The information contained herein is correct at the time of publication. with reservation for editorial errors This product is software dependent and its functions and compatibility can change when updating the software. Hereby, Zound Industries International AB, declares that this product is in compliance with 2014/53/EU and the UK The Radio Equipment Regulations 2017 (Sl2017/1206).
Maximum RF transmit power Bluetooth (2402-2480 MHz) < 20 dBm The full text of the EU and UKCA declaration of conformity is available at the following website: www.marshallheadphones.com/doc
UK Authorised Representative: Zound Industries UK LTD. 24 Old Queen Street, London, SW1H 9HP. United Kingdom Designed in Stockholm • Produced in China

LEGAL NOTICE

Design of device and packaging are intellectual properties of Zound industries International AB. C All Rights Reserved MARSHALL. Marshall Amps, their respective logos, “Marshall” and “Marshall trade dress are trademarks and intellectual property of Marshall Amplification Pie and may not be used without permission Permission granted to Zound Industries International AB.
The Bluetooth® wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Zound Industries Is under license.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidies.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX Is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries All other trademarks are the property of their respective owners and may not be used without permission.
For more legal information related to this product and to ,ts use in your specific region, and for more detailed information about Zound Industries and partner & license information, please visit the website: www.marshallheadphones.com.
The user Is recommended to visit the website regularly for up-to-date information.
Zound Industries International AB. Centralplan 15, 111 20 Stockholm, Sweden

FCC STATEMENT

WARNING: Any changes or modifications to this device not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with part 15 of the FCC Rules Operation Is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. Th,s device must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the interference by one or more of the following measures.

Symbols.png

Complies with IMDA Standards DA106056
Marshall Logo

Documents / Resources

| Marshall 972MINOR3 Minor III True Wireless Headphones [pdf] User Manual
972MINOR3, 972MINOR3 Minor III True Wireless Headphones, Minor III, True Wireless Headphones, Minor III True Wireless Headphones, Wireless Headphones, Headphones
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals