TRAVIS INDUSTRIES 94800821 Tempest Deck Mount Instruction Manual
- June 13, 2024
- TRAVIS INDUSTRIES
Table of Contents
TRAVIS INDUSTRIES 94800821 Tempest Deck Mount
Product Information
- Product Name: TempestTM Deck Mount
- SKU: 94800821
Overview
This deck mount is designed for use with the following permanent-mount Tempest models:
- Tempest Torch 24v (LP – 94900755 & NG – 94900745)
- Tempest Torch Manual Start (LP – 94900753 & NG – 9490043)
- Tempest Lantern 24v (LP – 94900757 & NG – 94900747)
- Tempest Lantern Manual Start (LP – 94900756 & 94900746)
Packing List
- Deck Mount (with (8) set-screws pre-installed)
- (4) 3/8 x 4 Lag Screws
- (4) 3/8-16 x 4 Bolts
- (4) 3/8-16 Lock-Nuts
- (4) 3/8 Washers
- (1) 1/8 Hex Wrench
Deck Mount Attachment
NOTE: The illustration below is for example only. Make sure to follow all gas line and building code requirements for your location. The base may be shimmed to level the mount.
Product Usage Instructions
- Ensure you have the correct Tempest model mentioned in the overview.
- Check that all the components mentioned in the packing list are included.
- Find a suitable location on your deck to install the Tempest deck mount.
- Ensure that you comply with all gas line and building code requirements for your location.
- If needed, shim the base of the deck mount to level it.
- Using the provided 3/8 x 4 Lag Screws, attach the deck mount securely to your deck.
- Use the 1/8 Hex Wrench to tighten the set-screws pre-installed on the deck mount.
- Place your desired Tempest model onto the deck mount and ensure it is securely attached.
- Follow the specific lighting and operation instructions for your Tempest model as mentioned in its respective user manual.
© Travis Industries, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>