JAXMOTECH HB 926 Hot Air Brush Instruction Manual

: June 4, 2024
: JAXMOTECH

Table of Contents

JAXMOTECH HB 926 Hot Air Brush Instruction Manual
Disposal
About these instructions
Safety warnings
Technical speciﬁcations
Cleaning and storage
DANGER due to electricity
Overheating protection
Styling your hair
At a glance (features)
Use (basic functions)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JAXMOTECH HB 926 Hot Air Brush Instruction Manual

JAXMOTECH-HB-926-Hot-Air-Brush-I

Dear Customer
Your new hot air brush is a real all-rounder. Not only can it dry your hair and add more volume, but it can also straighten or curl it. The heat is distributed evenly thanks to the ceramic coating on the heated bristles, styling your hair in a very gentle way. The integrated ionic function creates negative ions to stop your hair from becoming electrostatically charged, resulting in smooth, shiny hair. Thanks to the 360° swivel joint on the mains cable, the appliance is comfortable to handle. We hope that you will be entirely satisﬁed with your new hot air brush. Follow the instructions! Important information keep for future reference!

Disposal

This product and its packaging have been manufactured from valuable materials that can be recycled. Recycling reduces the amount of refuse and helps to preserve the environment. Dispose of the packaging at a recycling point that sorts materials by type. Make use of the local facilities provided for collecting paper, cardboard and lightweight packaging. Appliances marked with this symbol must not be disposed of along with normal household refuse! You are legally obliged to dispose of old appliances separately from household waste. Electronic appliances contain hazardous substances and, if stored or disposed of improperly, may cause harm to health and the environment. Information about collection points where old appliances can be disposed of free of charge is available from your local authorities.

About these instructions

This product is equipped with safety features. Nevertheless, read the safety warnings carefully and only use the product as described in these instructions to avoid accidental injury or damage.
Keep these instructions for future reference. If you give this product to someone else, remember to also include these instructions.
Symbols in these instructions:

This symbol warns you of the danger of injury.
This symbol warns you of the danger of injury caused by electricity.
This symbol warns you of the danger of using the appliance near water. The appliance must not be used next to or in water (e.g. showers, sinks, bathtubs, etc.) due to the risk of electric shock!
Read these instructions for use.
The term DANGER warns of potential severe injury and danger to life.
The term WARNING warns of injury and severe material damage.
The term CAUTION warns of minor injury or damage.
This indicates additional information.

Safety warnings

The product is intended for styling human head hair. It is not suitable for use on pets. Do not use it on artiﬁcial hair.
The product is suitable for use in dry indoor rooms.
The product has been designed for private use only and is not suitable for commercial purposes.
DANGER to children and to people with restricted ability to operate appliances
This appliance can be used by children aged 8 and over and by people with reduced physical, sensory or mental capabilities or a lack of experience and/or knowledge, provided they are supervised or have been trained in the safe use of the appliance and understand the potential dangers.
Children must not be allowed to play with the appliance.
Cleaning and user maintenance must not be carried out by children.
Remove all packaging materials prior to ﬁrst use and dispose of them in accordance with local regulations.

Technical speciﬁcations

Model: HB 926
Product number: 617 735
Mains voltage: 220-240 V~, 50–60 Hz
Protection class: II (the appliance is fitted with double insulation protection)
Power: max. 450 – 550 W
Ambient temperature: +10 to +40 °C
Manufactured by: Jaxmotech GmbH
Ostring 60
66740 Saarlouis
Germany

In the course of product improvement, we reserve the right to make technical and optical modiﬁcations to the product. This appliance complies with the requirements of the applicable national and European regulations.

Cleaning and storage

DANGER – the risk of fatal electric shock

Do not submerge the appliance in water or other liquids, as this poses a risk of electric shock.
Switch the appliance off before cleaning it and disconnect the mains plug from the wall socket.
Allow the appliance to cool down fully after cleaning it before using it again. There is a risk of fatal electric shock!
Allow the appliance to cool completely before cleaning it or putting it away.
To avoid damaging the coating on the heating elements, do not use any caustic or abrasive products, or hard brushes, etc. to clean the appliance.
Remove any remaining hair from the brush head so as not to block the air ﬂow openings.
Clean the air intake grille to ensure that ﬂuff or hair does not get M To clean the appliance, wipe it down as required using a soft, slightly dampened cloth. Make sure that no moisture gets into the appliance.
Store the appliance in a dry place out of the reach of the children.

DANGER due to electricity

Never immerse the appliance in water or any other liquids. The appliance must not be exposed to moisture. It must also be protected from drops or splashes of water, as they pose a risk of electric shock.
Do not use the appliance outdoors.

WARNING:
Do not use the appliance near to bathtubs, washbasins or other receptacles containing water. Do not use the appliance with damp hands or while standing on a damp ﬂoor. If you use the appliance in a bathroom, remove the main plug from the wall socket after use. Having water nearby presents a danger even if the appliance is switched off. As additional protection, we recommend installing a residual current device (RCD) with a rated tripping current of no more than 30 mA in the electrical circuit supplying the bathroom. Consult an electrician for advice.

If the appliance has fallen into the water despite taking precautionary measures, remove the mains plug from the wall socket immediately. Do not reach into the water. There is a risk of fatal electric shock!
Keep metal objects (e.g. jewelry) away from the air intake grille to prevent them from being sucked in. Risk of electric shock!
Do not insert any objects into the openings of the appliance. There are live parts inside of the appliance which may result in an electric shock if touched.
Allow the appliance to cool down fully after cleaning it before using it again. There is a risk of fatal electric shock!
Only connect the appliance to a properly installed wall socket with the mains voltage and fuse protection speciﬁed in the technical speciﬁcations of the appliance. Do not operate the appliance with a multiple socket outlet or power strip.
Do not use an extension cable to ensure that the main plug can be reached easily in an emergency.
If you would like to shape the tips of your hair inwards or outwards, turn the brush slightly in the corresponding direction when pulling it through the ends of your hair.
After straightening your hair, use suitable styling products as required to ﬁnish your hairstyle.

Overheating protection

This appliance is equipped with an overheating protection function. If the appliance becomes too hot, it will switch off automatically.

Turn the rotary switch to switch the appliance off and unplug
Check the air intake grille and air ﬂow openings for blockages and remove them if necessary.
Before using the appliance again, allow it to cool down for at least 10 minutes.
For more volume, place the roots of your hair over the brush as illustrated.
As soon as the hair is dry, either switch off the appliance or switch it to the function mode to ﬁnish styling.

Straightening your hair — infra-red heat function without air ﬂow

Before straightening your hair, dry it ﬁrst with the function mode until it is fully dry.
Then select function mode
Divide your hair into sections approx. 6 to 7 cm wide. Hold the section to be straightened at the tips and pull it taut. Guide the brush slowly and evenly over your hair from the roots towards the tips as illustrated. Do not hold the brush for longer than 2 seconds on the same spot. Be careful not to touch your scalp, ears, ﬁngers or face with the hot bristles. The bristles must be directed away from your head!
- Ensure that the wall socket is easily accessible
  so that the mains plug can be disconnected quickly, if necessary. Route the mains cable ensuring that it does not present a tripping hazard.
- Do not leave the appliance unattended while it is connected to the main power supply.
- Remove the mains plug from the wall socket when you are not using the appliance, if malfunctions occur during use, during thunderstorms and before cleaning the appliance. Always pull on the plug, never on the main cable.
- As the mains cable is subjected to a great deal of movement while in use, you should check it regularly for damage and wear. Do not wind the mains cable around the appliance.
- The main cable must not be kinked or squeezed. Keep the main cable away from hot surfaces and sharp edges.
- Do not use the appliance if the appliance or the mains cable shows any signs of damage or if the appliance has been dropped.
- Do not make any modiﬁcations to the product.
- Do not dismantle or repair the appliance yourself, as this may impair the function of the appliance. Do not attempt to replace the mains cable yourself. If the mains cable is damaged, it must be replaced only by the manufacturer, the manufacturer’s service agent or a similarly qualiﬁed person in order to avoid hazards. Only have repairs to the appliance carried out by a specialist workshop.

WARNING – the risk of burns

The appliance heats up very quickly. The bristles on the appliance become very hot during use. Make sure that you keep enough distance between the appliance and your scalp, ears and face.
Do not touch the hot bristles.
Only touch the appliance by the handle.
Allow the appliance to cool completely before cleaning it or putting it away.
Only hold the heated bristles for max. 2 seconds on one spot of hair. Otherwise, your hair may be damaged.
Spend a little time experimenting to ﬁnd out what effect the different function modes have on your hair. The outcome will also depend on the length of your hair.
Do not keep the hairbrush in the same position for too long. Keep the appliance moving constantly when in use.

Styling and drying the hair

Only use the higher mode with the infrared heat function switched while the hair is still damp. If it is used on dry hair there is a risk of burns on the hair and scalp.
1. Divide your towel-dry hair into sections approx. 6 to 7 cm wide.
2. Hold the section you would like to dry at the tips and pull it taut. Guide the brush slowly and evenly over your hair from the roots towards the tips. Be careful not to touch your scalp, ears,ﬁngers or face with the hot bristles. The bristles should be directed away from your head if possible! If using the brush the other way round,hold it at least 3 to 5 cm away from the scalp to allow the air to escape from the air ﬂow openings.
3. If styling curls, hold the brush in place for a moment with the section of hair inside it.

After use

After use, switch the appliance off. To prolong the service life of the appliance, we recommend setting the rotary switch to the lowest setting for few seconds ﬁrst before turning it all the way back.
Unplug the mains plug from the wall socket.
Place the appliance with the bristles facing upwards onto a heat-resistant mat or surface and leave the appliance to cool down fully. Ensure that no one accidentally touches the hot parts while the appliance is cooling down!
If necessary, clean the appliance before storing it away.
particular, remove any remaining hair from the brush head so as not to block the air ﬂow openings.

Styling your hair

As your hair comes into contact with very high temperatures when being styled, keep the following in mind:

When choosing a shampoo or other hair care products, check that they will moisturize your hair.
Use a heat protection product before styling your hair, especially if you are straightening it. Suitable products are available from your hairdresser or from a health and beauty retailer.
Do not use any other styling products before styling your hair with heated bristles.
The lighter, thinner or more sensitive the hair is, the lower the temperature should be to protect the hair. This also applies
to bleached or colored hair. Very thick, curly hair is less heat-sensitive and can withstand higher temperatures.

WARNING – ﬁre hazard

The bristles on the appliance become very hot. When taking a break from styling and after use, put the appliance down somewhere where the hot bristles are not touching any ﬂammable objects until they have cooled down sufﬁciently. Ensure that any surface on which the appliance is placed is heat-resistant.
Never leave the appliance unattended while switched on or when it is heating up or cooling down.
Do not cover the appliance (e.g. with a towel) while it is switched on or while the bristles are still hot.
The air intake grille must not be covered. Make sure that the air intake grille is not covered by your hair or ﬁngers and that no ﬂuff or hair is trapped inside.
Do not use the appliance on artiﬁcial hair.
This can melt when heated and damage the appliance.
Do not use any caustic or abrasive products, or hard brushes, etc. for cleaning. Make sure that no moisture gets into the appliance while cleaning it.

At a glance (features)

Use (basic functions)

When using the appliance for the ﬁrst time, there may be a slight odor; however, this is not a fault. Ensure there is adequate ventilation.

After washing your hair, dry your hair thoroughly with a towel ﬁrst and give it a good comb. Make sure you dry your hands completely.
Insert the mains plug into an easily accessible wall socket.
Use the ring-shaped rotary switch to select your preferred function mode (see “Styling your hair” for more information):

WARNING – the risk of ﬁre/burns

The bristles become very hot during use. Make sure that you keep enough distance between the appliance and your scalp, ears and face. Do not touch the hot bristles. Only touch the appliance by the handle.
The air ﬂow openings in the brush head and the air intake grille must not be covered. Make sure that the air ﬂow openings and air intake grille are not covered by your hair or ﬁngers and that no ﬂuff or hair is trapped inside.
If you need to take a short break while styling, put the appliance down somewhere where the hot bristles are not touching any ﬂammable objects. Ensure that any surface on which the appliance is placed is heat-resistant.