Boult Audio Rito Pro Wireless Earbuds User Manual
- June 12, 2024
- BOULT AUDIO
Table of Contents
Boult Audio Rito Pro Wireless Earbuds
Product Information
The Rito Pro is a TWS Bluetooth headset manufactured by Boult Audio. It features a touch control panel, LED indicators, and an ambient noise cancellation microphone. The headset is equipped with a 10mm speaker and supports Bluetooth version 5.3. It has a Bluetooth range of approximately 10 meters (33 feet) without any obstacles. The earbuds have a charging time of 45 minutes and a frequency range of 20Hz-20KHz. The technology used includes HFP, HSP, A2DP, and AVRCP. The input power is DC5V==1A.
Know your Rito Pro
What’s in the Box?
- Charging Case
- Earbuds
- Type C Charging Cable
- User Manual
- Extra pair of eartips
Product specification
- Product Name – TWS Bluetooth Headset
- Model – Boult Audio AirBass Bluetooth Version V5.3
- Speaker – 10mm
- Bluetooth Range – ~10m/ 33ft (without any obstacles)
- Earbud Charging Time – 45 mins
- Frequency Range – 20Hz-20KHz
- Technology – HFP/HSP/A2Dp/ AVRCP
- Input DC5V== 1A
How to use your Rito Pro ?
Touch Control
The touch area (MFB touch panel) is located in the upper part of the earbuds handle.
Wearing Earbuds
The earbud marked with “L” should be worn on the left ear, and the earbud marked with “R” should be worn on the right ear.
Power On/Off
Power on:
- Auto: Open the charging case and take out the earbuds to power on.
- Manually: Press and hold the MFB (Multifunction Button) for 3 seconds.
Power off:
- Auto: Place both earbuds in the charging case and close the lid.
- Manually: Press and hold the MFB for 5 seconds.
Playback Controls
- Play/Pause: Tap the MFB once.
- Next Track: Double tap the right MFB.
- Previous Track: Double tap the left MFB.
- Volume+: Triple tap the right MFB.
- Volume-: Triple tap the left MFB.
- Voice Assistant: Long press the MFB for 2 seconds.
Call Controls
- Answer the call : Tap the MFB once.
- End Call/Reject : Double tap the MFB.
Game Mode
To activate Game Mode, quadruple tap the MFB.
Voice Prompts
The headset provides voice prompts for different functions:
- “Power on” when the headset powers on.
- “Power off” when the headset powers off.
- “Connected” when the headset is paired.
- “Low battery” when the headset is in low power status.
- “Gaming mode” when the headset is in gaming mode.
Maintenance Instructions
The warranty for the product is valid/invalid based on the following criteria:
- The product should be purchased through legal and formal channels to be applicable for warranty.
- Damage caused intentionally/unintentionally or due to natural disasters is not covered by the warranty.
Additional Features
- IPX5 Water Resistant
- Pro+ Calling MIC
- Touch Control Exquisite Design
- ZHA40igch oFidueslitytics
Pairing
Open the charging case, and take out the earbuds, earbuds will pair
automatically, One of the earbuds flashes blue and red, the other earbud light
goes out.
Activate bluetooth on the device, turn on Bluetooth, search for pairing name
“Boult Audio Airbass” and click on it. Single Mode: When on dual mode, put one
earbud into the charging case. Only take one earbud out of the charging case
and connect it.
Bluetooth Lost: Turn off mobile phone’s Bluetooth, earbuds will enter pairing
mode and can pair with other devices. If the connection range is exceeded, the
earbuds will enter the back connection mode. No connection within 5 minutes,
the earbuds will turn off.
Reset
If your earbuds fail to pair, or only one works, reset them.
- Delete all “Boult Audio Airbass” Bluetooth records on the phone and turn off bluetooth.
- Put earbuds in the charging case and then take out to pairing modes, tap L& 5 times simultaneously, hear “DU” prompt voice to clear all pairing.
- Put earbuds back into the charging case.