MENSARJOR SS3219R9 32 x 19 Inch Workstation Ledge Handmade Undermount Kitchen Sink Instruction Manual
- May 15, 2024
- MENSARJOR
Table of Contents
SS3219R9 32 x 19 Inch Workstation Ledge
Handmade Undermount Kitchen Sink
Instruction Manual
Specification
SS3219R9
- Outer Sizes: 32” x 19” x 9”
- Inner Sizes: 30” x 17” x 9”
- Material thickness: 16 Gauge/ 1.5mm
- Material:Type304
- Recommended Installation Type: Undermount
Installation steps
Step 1
Place the cutting board flat on the table, making sure that the edge of the
cutting board is parallel to the edge of the table
Step 2
Use a suitable tool to extend the line cutting table shown on the cutting
board. (be careful)
Step 3
Using a good quality silicone caulk, Apply a generous bead of silicone to the
perimeter of the sink’s rim.
Step 4
Carefully place the sink upside down on the countertop, positioning it within
the outline.
Step 5
Placing the bracket flat against the sink lip. Screw the wing bolts tighten
snugly.
Step 6
Carefully turn the countertop and attached sink over. Remove any excess
silicone and let silicone dry.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>