BOULT AUDIO FCHARGE Wireless in Ear Bluetooth Neckband User Manual
- June 12, 2024
- BOULT AUDIO
Table of Contents
BOULT AUDIO FCHARGE Wireless in Ear Bluetooth Neckband
Product Information
The CHARGE is an earbud-style wireless headset with a built-in microphone. It features a multifunction button (MFB) for easy control of calls and music playback. The headset has an indicator light to display various statuses, a USB charge port for charging, and supports Bluetooth connectivity for pairing with mobile devices.
Note: The specific steps may vary depending on your mobile device’s Bluetooth settings. Please refer to your mobile device’s user manual for more information.
Product Introduction
PAIRING STEPS
Press and hold 5s
NOTE: The headset will power off automatically 3 minutes without connection.
Under power-off status, press and hold the MFB until the indicator light flashes red and blue alternatively, then the Headset enters the pairing mode.
Turn on Bluetooth on your mobile and select “Boult Audio Probass” to connect. Turn off Bluetooth of the mobile, and repeat the step above to connect with the second mobile.
IMPORTANT FEATURES
Power on\off
Power on:- Press and hold the multifunction (MFB) for 3s until the BLUE
light flashes.
Power off:- Press and hold the (MFB) for 5s till the RED light on for 2s.
Call answer
Call answer:- answer by your phone or press the MFB.|
Call End
Call End:- End by your phone or press the MFB.
Call Reject.
Call Reject:- Reject by your phone or press and hold the MFB for 2s.
Last Number Redial
Quickly tap the MFB twice to redial the last dialed phone number.
Play Music
Play Music:- Press the MFB to play/pause music under music playing
status
Track Control
Track control:- Press and hold the “Volume+” button for 3s to skip to
the next song. Press and hold the “Volume-” button for 3s to play the previous
song.
Volume Adjust
Volume adjust- Tap the “Volume+” or “Volume-” button to increase or
decrease the volume.
Voice Prompt
- you will hear ‘’power on” when the Headset is power on.
- you will hear ‘’power off” when the Headset is powered off.
- You will hear “connected” when the Headset is paired.
- You will hear “low battery” when the Headset is in low power status.
Warning:
- Use and keep the Headset under ambient temperatures.
- don’t throw it in case product damage caused.
- Don’t disassemble, repair or alter the Headset.
- Don’t clean the Headset with chemical solvent.
- Use a USB charger of DC5V to charge the Headset if necessary.
- Don’t discard the Headset at random, or put it into are or high-temperature environment (60/140) in case of danger.
Accessories:
- Instructions x 1pc
- USB charging cable x 1pc
- Earbuds x 3pcs